References
- Kwok CT, Man HC and Cheng FT: ‘Cavitation erosion and pitting behaviour of laser surface-melted martensitic stainless steel UNS S42000’, Surf. Coat. Technol., 2000, 126, (2–3), 238–255.
- Sun Y and Bell T: ‘Dry sliding wear resistance of low temperature plasma carburised austenitic stainless steel’, Wear, 2002, 253, (5–6), 689–693.
- Zhou S, Zeng X, Hu Q and Huang Y: ‘Effects of processing parameters on structure of Ni-based WC composites coatings during laser induction hybrid rapid cladding’, Appl. Surf. Sci., 2008, 255, (20), 1646–1653.
- Ramesh CS, Srinivas CK and Channabasappa BH: ‘Abrasive wear behaviour of laser sintered iron-SiC composites’, Wear, 2009, 267, (11), 1777–1783.
- Gupta D and Sharma AK: ‘Investigation on sliding wear performance of WC10Co2Ni cladding developed through microwave irradiation’, Wear, 2011, 271, (9–10), 1642–1650.
- Clark DE and Sutton WH: ‘Microwave processing of materials’, Annu. Rev. Mater. Sci., 1996, 26, 299–331.
- Clark DE, Folz DC and West JK: ‘Processing materials with microwave energy’, Mater. Sci. Eng. A, 2000, A287, (2), 153–158.
- Sharma AK, Aravindhan S and Krishnamurthy R: ‘Microwave glazing of alumina-titania ceramic composite coatings’, Mater. Lett., 2001, 50, (5–6), 295–301.
- Cheng J, Agrawal D, Zhang Y and Roy R: ‘Microwave reactive sintering to fully transparent aluminum oxynitride (ALON) ceramics’, J. Mater. Sci. Lett., 2001, 20, (1), 77–79.
- Sharma AK and Krishnamurthy R: ‘Microwave processing of sprayed alumina composite for enhanced performance’, J. Eur. Ceram. Soc., 2002, 22, (16), 2849–2860.
- Fisher JG, Woo SK and Bai K: ‘Microwave reaction bonding of silicon nitride using an inverse temperature gradient and ZrO2 and Al2O3 sintering additives,’ J. Eur. Ceram. Soc., 2003, 23, (5), 791–799.
- Fang CY, Randal CA, Lanagan MT and Agrawal DK: ‘Microwave processing of electroceramic materials and devices’, J. Electroceram., 2009, 22, (1–3), 125–130.
- Leonelli C, Veronesi P, Denti L, Gatto A and Iuliano L: ‘Microwave assisted sintering of green metal parts’, J. Mater. Process. Technol., 2008, 205, (1–3), 489–496.
- Thostenson ET and Chou TW: ‘Microwave processing: fundamentals and applications’, Compos. A, 1999, 30A, (9), 1055–1071.
- Bykov YV, Rybakov KI and Semenov VE: ‘High-temperature microwave processing of materials’, J. Phys. D: Appl. Phys., 2001, 34, (13), R55–R75.
- Sharma AK, Srinath MS and Kumar P: ‘Microwave joining of metallic materials’, Indian Patent, Application no. 1994/Del/2009, filed September 24, 2009.
- Sharma AK and Gupta D: ‘A method of cladding/coating of metallic and non- metallic Powders on metallic substrates by microwave irradiation’, Indian Patent, Application no. 527/Del/2010, filed March 09, 2010.
- Gupta D and Sharma AK: ‘Development and microstructural characterization of microwave cladding on austenitic stainless steel’, Surf. Coat. Technol., 2011, 205, (21–22), 5147–5155.
- Gupta D and Sharma AK: ‘Microstructural characterisation of cermet cladding developed through microwave irradiation’, J. Mater. Eng. Perform., 2012, 21, (10), 2165–2172.
- Sharma AK and Gupta D: ‘On microstructure and flexural strength of metal-ceramic composite cladding developed through microwave heating’, Appl. Surf. Sci., 2012, 258, (15), 5583–5592.
- Pereira JM and Lerch BA: ‘Effect of heat treatment on ballistic impact properties of Inconel 718 for jet engine fan containment’, Int. J. Impact Eng., 2001, 25, (8), 715–733.
- Pottlacher G, Hosaeus H, Wilthan B, Kaschnitz E and Seifter A: ‘Thermophysical properties of solid and liquid Inconel-718’, Thermochim. Acta, 2002, 382, (1–2), 255–267.
- Ramesh CS, Devaraj DS, Keshavamurthy R and Sridhar BR: ‘Slurry erosive wear behaviour of thermally sprayed Inconel-718 coatings by APS process’, Wear, 2011, 271, 1365–1371.
- Al-Fadhli HY, Stokes J, Hashmi MSJ and Yilbas BS: ‘The erosion-corrosion behaviour of high velocity oxy-fuel (HVOF) thermally sprayed Inconel-625 coatings on different metallic surfaces’, Surf. Coat. Technol., 2006, 200, 5782–5788.
- Verdi D, Garrido MA, Múnez CJ and Poza P: ‘Mechanical properties of Inconel 625 laser cladded coatings: depth sensing indentation analysis’, Mater. Sci. Eng. A, 2014, A598, 15–21.
- Mondal A, Shukla A, Upadhyaya A and Agrawal D: ‘Effect of porosity and particle size on microwave heating of copper’, Sci. Sinter., 2010, 42, 169–182.
- Zafar S, Sharma AK and Arora N: ‘Development and microstructural characterisation of Inconel cladding on stainless steel through microwave irradiation’, JME, 2013, 3, (1), 9–16.
- Oghbaei M and Mirzaee O: ‘Microwave versus conventional sintering: a review of fundamentals, advantages and applications’, J. Alloys Compd, 2010, 494, (1–2), 175–189.
- Tabakoff W: ‘Protection of coated superalloys from erosion in turbomachinery and other systems exposed to particulate flows’, Wear, 1999, 233, 200–208.
- Finnie I: ‘Erosion of surfaces by solid particles’, Wear, 1960, 3, (2), 87–103.