Effects of elements W and C on microstructure and wear property of γ-TiAl surface alloying layer

References

• C. X. Cui, B. M. Hu, L. C. Zhao and S. J. Liu: ‘Titanium alloy production technology, market prospects and industry development’, Mater. Des., 2011, 32, 1684–1691. doi: 10.1016/j.matdes.2010.09.011
   Web of Science ®Google Scholar
• E. A. Loria: ‘Gamma titanium aluminides as prospective structural materials’, Intermetallics, 2000, 8, 1339–1345. doi: 10.1016/S0966-9795(00)00073-X
   Web of Science ®Google Scholar
• K. Fujita: ‘Research and development of oxidation, wear and corrosion resistant materials at high temperature by surface modifications at high temperature by surface modification using ion processing’, Surf. Coat. Technol., 2005, 196, 139–144. doi: 10.1016/j.surfcoat.2004.08.092
   Web of Science ®Google Scholar
• C. Leyens, R. Braun, M. Fröhlich and PEh Hovsepian: ‘Recent progress in the coating protection of gamma titanium-aluminides’, JOM, 2006, 58, 17–21. doi: 10.1007/s11837-006-0062-4
   Web of Science ®Google Scholar
• C. X. Li, J. Xia and H. Dong: ‘Sliding wear of TiAl intermetallics against steel and ceramics of Al2O3, Si3N4 and WC/Co’, Wear, 2006, 261, 693–701. doi: 10.1016/j.wear.2006.01.044
   Web of Science ®Google Scholar
• A. R. Rastkar, A. Bloyce and T. Bell: ‘Sliding wear behavior of two gamma-based titanium aluminides’, Wear, 2000, 240, 19–26. doi: 10.1016/S0043-1648(00)00334-3
   Web of Science ®Google Scholar
• P. J. Maziasz, R. V. Ramanujan, C. T. Liu and J. L. Wright: ‘Effects of B and W alloying additions on the formation and stability of lamellar structures in two-phase γ-TiAl’, Intermetallics, 1997, 5, 83–95. doi: 10.1016/S0966-9795(96)00070-2
   Web of Science ®Google Scholar
• W. H. Tian and M. Nemoto: ‘Effects of carbon addition on the microstructures and mechanical properties of γ-TiAl alloys’, Intermetallics, 1997, 5, 237–244. doi: 10.1016/S0966-9795(96)00086-6
   Web of Science ®Google Scholar
• X. P. Liu, W. H. Tian, W. Xu, W. P. Liang and Z. Xu: ‘Wear resistance of TiAl intermetallics by plasma alloying and plasma carburization’, Surf. Coat. Technol., 2007, 201, 5278–5281. doi: 10.1016/j.surfcoat.2006.07.144
   Web of Science ®Google Scholar
• A. R. Rastkar and T. Bell: ‘Tribological performance of plasma nitrided gamma based titanium aluminides’, Wear, 2002, 253, 1121–1131. doi: 10.1016/S0043-1648(02)00236-3
   Web of Science ®Google Scholar
• T. Noda, M. Okabe and S. Isobe: ‘Hard surfacing of TiAl intermetallic compound by plasma carburization’, Mater. Sci. Eng. A, 1996, A213, 157–161. doi: 10.1016/0921-5093(96)10248-3
   Web of Science ®Google Scholar
• X. H. Chen, P. Z. Zhang, D. B. Wei, J. Huang and W. Xuan: ‘Surface modification of pure titanium by plasma tantalumising’, Surf. Eng., 2013, 29, 228–233. doi: 10.1179/1743294412Y.0000000107
   Web of Science ®Google Scholar
• J. Huang, P. Z. Zhang, H. F. Wu and W. J. Bao: ‘Investigation of W-Mo alloyed layer synthesised by double glow plasma surface metallurgy’, Surf. Eng., 2011, 27, 113–117.
   Web of Science ®Google Scholar
• J. Xu, Z.-H Xie and P. Munroe: ‘Effect of Cr alloying on friction and wear of sputter-deposited nanocrystalline (MoxCr1-x)5Si3 films’, Intermetallics, 2011, 19, 1146–1156. doi: 10.1016/j.intermet.2011.03.019
   Web of Science ®Google Scholar
• L. Qin, K. K. Yang, C. S. Liu and B. Tang: ‘Enhanced plasma boriding with molybdenum using double glow plasma surface alloying technique’, Mater. Lett., 2012, 82, 127–130. doi: 10.1016/j.matlet.2012.05.069
   Web of Science ®Google Scholar
• X. P. Liu, P. L. Ge, K. You, Z. X. Wang and Z. Y. He: ‘Plasma alloying of TiAl with niobium and its wear resistance’, Rare. Metal. Mater. Eng., 2011, 40, 1891–1896. doi: 10.1016/S1875-5372(12)60009-5
   Web of Science ®Google Scholar
• Z. Xu and S. C. Columbia: ‘Methods and apparatus for introducing normally solid materials into substrate surfaces’, US Patent 4520268, 1985.
   Google Scholar
• F. L. Shang, X. Zhang, X. Guo, P. F. Zhao and Y. Chang: ‘Determination of high temperature mechanical properties of thermal barrier coatings by nanoindentation’, Surf. Eng., 2013, 30, 283–289. doi: 10.1179/1743294413Y.0000000227
   Web of Science ®Google Scholar
• Y. F. Gao, B. N. Lucas, J. C. Hay, W. C. Oliver and G. M. Pharr: ‘Nanoscale incipient asperity sliding and interface micro-slip assessed by the measurement of tangential contact stiffness’, Scr. Mater., 2006, 55, 653–656. doi: 10.1016/j.scriptamat.2006.05.006
   Web of Science ®Google Scholar
• Varacalle DJ Jr, L. B. Lundberg, H. Herman and G. Bancke: ‘Titanium carbide coatings fabricated by the vacuum plasma spraying process’, Surf. Coat. Technol., 1996, 86, 70–74. doi: 10.1016/S0257-8972(96)02962-3
   Web of Science ®Google Scholar
• J. Wang, R. G. Song, X. Lin and W. D. Huang: ‘Microstructure and properties of laser cladding TiC/TiAl composite coatings on γ-TiAl intermetallic alloy’, Surf. Eng., 2009, 25, 196–200. doi: 10.1179/174329408X326452
   Web of Science ®Google Scholar
• R. S. Rawat, P. Lee, T. White, L. Ying and S. Lee: ‘Room temperature deposition of titanium carbide thin films using dense plasma focus device’, Surf. Coat. Technol., 2001, 138, 159–165. doi: 10.1016/S0257-8972(00)01094-X
   Web of Science ®Google Scholar
• K. Abdelouahdi, C. Sant, C. Legrand-buscema, P. Aubert, J. perriere, G. Renou and P. h. Houdy: ‘Microstructural and mechanical investigations of tungsten carbide films deposited by reactive RF sputtering’, Surf. Coat. Technol., 2006, 200, 6469–6473. doi: 10.1016/j.surfcoat.2005.11.015
   Web of Science ®Google Scholar
• J. Y. Sheikh-Ahmad and J. A. Bailey: ‘The wear characteristics of some cemented tungsten carbides in machining particleboard’, Wear, 1999, 225–229, 256–266. doi: 10.1016/S0043-1648(98)00361-5
   Web of Science ®Google Scholar
• J. Chen, X. Y. Li, R. Ji, R. Khan and G. Fuentes: ‘Nanomechanical properties of duplex treated 42CrMo4 steel’, Surf. Eng., 2013, 29, 462–467. doi: 10.1179/1743294413Y.0000000131
   Web of Science ®Google Scholar
• J. Chen, X. L. Guo, Q. Tang, C. Y. Zhuang, J. S. Liu, S. Q. Wu and B. D. Beake: ‘Nanomechanical properties of grapheme on poly(ethylene terephthalate)’, Carbon, 2013, 55, 144–150. doi: 10.1016/j.carbon.2012.12.020
   Web of Science ®Google Scholar
• B. D. Beake, G. A. Bell, S. R. Goodes, N. J. Pickford and J. F. Smith: ‘Improved nanomechanical test techniques for surface engineered materials’, Surf. Eng., 2010, 26, 37–49. doi: 10.1179/174329409X451137
   Web of Science ®Google Scholar
• A. Leyland and A. Matthews: ‘On the significance of the H/E ratio in wear control: a nanocomposite coating approach to optimized tribological behavior’, Wear, 2000, 246, 1–11. doi: 10.1016/S0043-1648(00)00488-9
   Web of Science ®Google Scholar
• J. Musil: ‘Hard and superhard nanocomposite coatings’, Surf. Coat. Technol., 2000, 125, 322–330. doi: 10.1016/S0257-8972(99)00586-1
   Web of Science ®Google Scholar
• H. Qi and H. Y. Wu: ‘Effect of surface modification of pure Ti on tribological and biological properties of bone tissue’, Surf. Eng., 2013, 29, 300–305. doi: 10.1179/1743294412Y.0000000095
   Web of Science ®Google Scholar
• E. Bemporad, M. Sebastiani, M. H. Staia and E. Puchi Cabrera: ‘Tribological studies on PVD/HVOF duplex coatings on Ti6Al4V substrate’, Surf. Coat. Technol., 2008, 203, 566–571. doi: 10.1016/j.surfcoat.2008.06.055
   Web of Science ®Google Scholar