References
- Saha RK and Khan TI: ‘Effect of applied current on the electrodeposited Ni–Al2O3 composite coatings’, Surf. Coat. Technol., 2010, 205, 890–895.
- Arghavanian R, Parvini Ahmadi N, Yazdani S and Bostani B: ‘Investigations on corrosion proceeding path and EIS of Ni–ZrO2 composite coating’, Surf. Eng., 2012, 28, (7), 508–512.
- Shao W, Nabb D, Renevier N, Sherrington I, Fu YQ and Luo JK: ‘Mechanical and anti-corrosion properties of TiO2 nanoparticle reinforced Ni coating by electrodeposition’, J. Electrochem. Soc., 2012, 159, (11), D671–D676.
- Yousefpour M and Rahimi A: ‘Characterization and selection of optimal parameters to achieve the best tribological performance of the electrodeposited Cr nanocomposite coating’, Mater. Des., 2014, 54, 382–389.
- Eslami M, Golestani-Fard F, Saghafian H and Robin A: ‘Study on tribological behaviour of electrodeposited Cu–Si3N4 composite coatings’, Mater. Des., 2014, 58, 557–569.
- Aghaie E, Najafi A, Maleki-Ghaleh H and Mohebi H: ‘Effect of SiC concentration in electrolyte on Ni–SiC composite coating properties’, Surf. Eng., 2013, 29, (3), 177–182.
- Dai PQ, Zhong YH and Zhou X: ‘Corrosion characteristic of pulsed electrodeposition Ni–Co/SiC nanocomposite coating’, Surf. Eng., 2011, 27, (1), 71–76.
- Sviridova TV, Stepanova LI and Sviridov DV: ‘Electrochemical synthesis of Ni–MoO3 composite films: redox-mediated mechanism of electrochemical growth of metal–matrix composite’, J. Solid State Electrochem., 2012, 16, 3799–3803.
- Tian LL and Xu JC: ‘Electrodeposition and characterization of Ni–Y2O3 composite’, Appl. Surf. Sci., 2011, 257, 7615–7620.
- Qu NS, Zhu D and Chan KC: ‘Fabrication of Ni–CeO2 nanocomposite by electrodeposition’, Scr. Mater., 2006, 54, 1421–1425.
- Arghavanian R, Bostani B and Parvini-Ahmadi N: ‘Characterisation of coelectrodeposited Ni–Al composite coating’, Surf. Eng., 2014, DOI 10·1179/1743294414Y.0000000339.
- Cai F, Jiang CH and Wu XY: ‘X-ray diffraction characterization of electrodeposited Ni–Al composite coatings prepared at different current densities’, J. Alloys Compd, 2014, 604, 292–297.
- Peng X, Zhang Y, Zhao J and Wang F: ‘Electrochemical corrosion performance in 3·5% NaCl of the electrodeposited nanocrystalline Ni films with and without dispersions of Cr nanoparticles’, Electrochim. Acta, 2006, 51, 4922–4927.
- Zhang C, Peng X, Zhao J and Wang F: ‘Hot corrosion of an electrodeposited Ni–11 wt % Cr nanocomposite under molten Na2SO4–K2SO4–NaCl’, J. Electrochem. Soc., 2005, 152, (9), B321–B326.
- Yang X, Peng X and Wang F: ‘Size effect of Al particles on the structure and oxidation of Ni/Ni3Al composites transformed from electrodeposited Ni–Al films’, Scr. Mater., 2007, 56, 509–512.
- Yang X, Peng X, Xu C and Wang F: ‘Electrochemical Assembly of Ni–xCr–yAl nanocomposites with excellent high-temperature oxidation resistance’, J. Electrochem. Soc., 2009, 156, (5), C167–C175.
- de Keijser ThH, Langford JI, Mittemeijer EJ and Vogels ABP: ‘Use of the Voigt function in a single-line method for the analysis of X-ray diffraction line broadening’, J. Appl. Cryst., 1982, 15, 308–314.
- Withers PJ and Bhadeshia H: ‘Residual stress. Part 1 – Measurement techniques’, Mater. Sci. Technol., 2001, 17, 355–365.
- Furukawa M, Horita Z, Nemoto M, Veliev RZ and Langdon TG: ‘Microhardness measurements and the Hall–Petch relationship in an Al–Mg alloy with submicrometer grain size’, Acta Mater., 1996, 44, 4619–4629.
- Nguyen VC, Lee CY, Chang L, Chen FJ and Lin CS: ‘The relationship between nano crystallite structure and internal stress in Ni coatings electrodeposited by Watts bath electrolyte mixed with supercritical CO2’, J. Electrochem. Soc., 2012, 159, (6), D393–D399.
- Meyers MA and Chawla KK: ‘Mechanical behavior of materials’; 1999, Upper Saddle River, NJ, Prentice Hall.
- Naumkin AV, Kraut-Vass A, Gaarenstroom SW and Powell CJ: ‘NIST standard reference database 20, Version 4.1’, 2012, available at http://srdata.nist.gov/xps/selEnergyType.aspx
- Scully JC: ‘The fundamentals of corrosion’; 1990, Oxford, Pergamon Press.
- Boven GV, Chen W and Rogge R: ‘The role of residual stress in neutral pH stress corrosion cracking of pipeline steels. Part I: Pitting and cracking occurrence’, Acta Mater., 2007, 55, 29–42.