Coating formation, fracture mode and cavitation performance of Fe40Al deposited by cold gas spraying

References

• C. T. Liu and J. O. Stiegler: ‘Ordered intermetallics. Properties and selection: nonferrous alloys and special purpose materials’, in ‘Metals handbook’, 10th edn, Vol. 2, ‘Properties and selection: nonferreous alloys and special-purpose materials’, 913–941; 1990, Materials Park, OH, ASM International.
   Google Scholar
• S. C. Deevi and V. K. Sikka: ‘Nickel and iron aluminides: an overview on properties, processing and applications’, Intermetallics, 1996, 4, 357–375. doi: 10.1016/0966-9795(95)00056-9
   Web of Science ®Google Scholar
• N. Cinca and J. M. Guilemany: ‘Thermal spraying of transition metal aluminides: an overview’, Intermetallics, 2012, 24, 60–72. doi: 10.1016/j.intermet.2012.01.020
   Web of Science ®Google Scholar
• J. M. Guilemany, N. Cinca, J. Fernández and S. Sampath: ‘Erosion, abrasive and friction wear behaviour of iron aluminide coatings sprayed by HVOF’, J. Therm. Spray Technol., 2008, 17, (5–6), 762–773. doi: 10.1007/s11666-008-9252-7
   Web of Science ®Google Scholar
• B. Xu, Z. Zhu, W. Zhang and S. Ma: ‘The microstructure and high-temperature sliding wear behavior of Fe-Al coating produced by high velocity arc spraying’, Proc. Int. Thermal Spray Conf. on ‘Advances in technology and application’, Osaka, Japan, 2004, ASM International, 1052–1055.
   Google Scholar
• B. Xu, Z. Zhu, S. Ma, W. Zhang and W. Liu: ‘Sliding wear behavior of Fe-Al and Fe-Al/WC coatings prepared by high velocity arc spraying’, Wear, 2004, 257, 1089–1095. doi: 10.1016/j.wear.2004.05.012
   Web of Science ®Google Scholar
• A. Y. Mosbah, D. Wexler and A. Calka: ‘Abrasive wear of WC-FeAl composites’, Wear, 2005, 258, 1337–1341. doi: 10.1016/j.wear.2004.09.061
   Web of Science ®Google Scholar
• M. Ahmadian, D. Wexler, T. Chandra and A. Calka: ‘Abrasive wear of WC-FeAl-B and WC-Ni3Al-B composites’, Int. J. Refract. Met. Hard Mater., 2005, 23, 155–159. doi: 10.1016/j.ijrmhm.2004.12.002
   Web of Science ®Google Scholar
• C. Testani, A. Di Gianfrancesco, O. Tassa and D. Pocci: ‘FeAl intermetallics and applications: an overview’, Proc. Int. Symp. on ‘Nickel and iron aluminides: processing, properties and applications’, Cincinnati, OH, 1996, 213–222.
   Google Scholar
• R. Jasionowski and Z. Dariusz: ‘The effect of aluminium content on the cavitational erosion resistance of Fe-Al(B2) alloys’, Proc. 15th Int. Conf. on ‘Properties of water and steam’, 2008.
   Google Scholar
• C. M. Hansson: ‘Cavitation erosion’, in ’Metals handbook’, 10th edn, Vol. 18, ‘Friction, lubrication, and wear technology’, 315–333; 1990, Materials Park, OH, ASM International.
   Google Scholar
• R. Singh, S. K. Tiwari and S. K. Mishra: ‘Cavitation erosion in hydraulic turbine components and mitigation by coatings: current status and future needs’, J. Mater. Eng. Perform., 2012, 21, (7), 1539–1551. doi: 10.1007/s11665-011-0051-9
   Web of Science ®Google Scholar
• H. T. Wang, C. J. li, G. J. Yang, C. X. Li, Q. Zhang and W. Y. Li: ‘Microstructural characterization of cold-sprayed nanostructured FeAl intermetallic compound coating and its ball-milled feedstock powders’, Proc. Thermal Spray Conf. on ‘Global coating solutions’, Beijing, China, 2007, ASM International, 135–140.
   Google Scholar
• H. Wang, C. Li, G. Yang, C. Li, P. Gao and Q. Zhang: ‘Deposition characteristics of Fe/Al composite coating fabricated by cold spraying’, Proc. Thermal Spray Conf. on ‘Crossing borders’, Maastricht, The Netherlands, 2008, ASM International, 123–129.
   Google Scholar
• H.-T Wang, C.-J Li, G.-J Yang and C.-X Li: ‘Cold spraying of Fe/Al powder mixture: coating characteristics and influence of heat treatment on the phase structure’, Appl. Surf. Sci., 2008, 255, 2538–2544. doi: 10.1016/j.apsusc.2008.07.127
   Web of Science ®Google Scholar
• T. Sugama: ‘Y2O3-sealed Ni-Al protective coatings for Inconel’, Surf. Coat. Technol., 1998, 106, (2–3), 106–116. doi: 10.1016/S0257-8972(98)00502-7
   Web of Science ®Google Scholar
• Q. Zhang, C. Li, X. Wang, Z. Ren, C. Li and G. Yang: ‘Formation of NiAl intermetallic compound by cold spraying of ball-milled Ni/Al alloy powder through postannealing treatment’, J. Therm. Spray Technol., 2008, 17, (5–6), 715–720. doi: 10.1007/s11666-008-9225-x
   Web of Science ®Google Scholar
• T. Novoselova, S. Celotto, R. Morgan, P. Fox and W. O’Neill: ‘Formation of TiAl intermetallics by heat treatment of cold-sprayed precursor deposits’, J Alloys Compd, 2007, 436, 69–77. doi: 10.1016/j.jallcom.2006.06.101
   Web of Science ®Google Scholar
• N. Cinca, A. List, F. Gärtner, J. Fernández, J. M. Guilemany and T. Klassen: ‘Deformation and adherence of Fe40Al- particles in cold gas spraying’, Proc. Int. Thermal Spray Conf., Busan, Korea, 2013, ASM International, 207–301.
   Google Scholar
• N. Cinca, A. List, F. Gärtner, J. M. Guilemany and T. Klassen: ‘Influence of spraying parameters on cold gas spraying of iron aluminide intermetallics’, Proc. Les Rencontres Internationales sur la Projection Thermique (6RIPT), European Thermal Spray Association (ETSA), Proceedings RIPT 2013, CD Edition, Limoges.
   Google Scholar
• J. Bystrzycki: ‘Static recrystallization of shock-wave (explosively) deformed Fe±40 at% Al±Zr±B intermetallic’, Intermetallics, 2000, 8, 89–98. doi: 10.1016/S0966-9795(99)00071-0
   Web of Science ®Google Scholar
• H. Assadi, F. Gärtner, T. Stoltenhoff and H. Kreye: ‘Bonding mechanism in cold gas spraying’, Acta Mater., 2003, 51, 4379–4394. doi: 10.1016/S1359-6454(03)00274-X
   Web of Science ®Google Scholar
• T. Schmidt, , F. Gärtner, H. Assadi and H. Kreye: ‘Development of a generalized parameter window for cold spray deposition’, Acta Mater., 2006, 54, 729–742. doi: 10.1016/j.actamat.2005.10.005
   Web of Science ®Google Scholar
• T. Stoltenhoff, H. Kreye and H. J. Richter: ‘An analysis of the cold spray process and its coatings’, J. Therm. Spray Technol., 2002, 11, (4), 542–550. doi: 10.1361/105996302770348682
   Web of Science ®Google Scholar
• I. Baker and D. J. Gaydosh: ‘Flow and fracture of Fe-Al’, Mater. Sci. Eng., 1987, 96, 147–158. doi: 10.1016/0025-5416(87)90549-0
   Google Scholar
• M. A. Crimp and K. M. Vedula: ’ Effect of boron on the tensile properties of B2 FeAl ’, Mater. Sci. Eng., 1986, 78, 193–200. doi: 10.1016/0025-5416(86)90323-X
   Google Scholar
• H. Xiao and I. Baker: ‘The temperature dependence of the flow and fracture of Fe-40Al’, Scr. Metall. Mater., 1993, 28, 1411–1416. doi: 10.1016/0956-716X(93)90491-A
   Google Scholar
• R. L. Fleischer: ‘Intermetallic compounds for strong high-temperature materials: status and potential’, Annu. Rev. Mater. Sci., 1989, 19, 231–263. doi: 10.1146/annurev.ms.19.080189.001311
   Web of Science ®Google Scholar
• I. Baker, H. Xiao, O. Klein, C. Nelson and J. D. Whittenberger: ‘The effect of temperature and Fe:Al ratio on the flow and fracture of FeAl’, Acta Metal. Mater., 1995, 43, (4), 1723–1730. doi: 10.1016/0956-7151(94)00369-S
   Google Scholar
• Y. Yang, I. Baker, G. T. Gray and C. Cady: ‘The yield stress anomaly in stoichiometric FeAl at high strain rate’, Scr. Mater., 1999, 40, (4), 403–408. doi: 10.1016/S1359-6462(98)00448-5
   Web of Science ®Google Scholar
• C. F. Naude and A. T. Ellis: ‘On the mechanism of cavitation damage by non-hemispherical cavities collapsing in contact with a solid boundary’, J. Basic Eng., 1961, 83, 648–656. doi: 10.1115/1.3662286
   Google Scholar
• R. Canavelis: ‘Jet impact and cavitation damage’, J. Basic Eng., 1968, 3, 355–367. doi: 10.1115/1.3605106
   Web of Science ®Google Scholar
• R. H. Richman and W. P. McNaughton: ‘Correlation of cavitation erosion behavior with mechanical properties of metals’, Wear, 1990, 140, (1), 63–82. doi: 10.1016/0043-1648(90)90122-Q
   Web of Science ®Google Scholar