290
Views
18
CrossRef citations to date
0
Altmetric
Research Papers

Pt/PANI–MWCNTs nanocomposite coating prepared by electropolymerisation–electrodeposition for glycerol electro-oxidation

&
Pages 472-479 | Received 08 Jul 2014, Accepted 16 Dec 2014, Published online: 30 Dec 2014

References

  • Steele BCH and Heinzel A: ‘Materials for fuel-cell technologies’, Nature, 2001, 414, 345–352.
  • Matsuoka K, Iriyama Y, Abe T, Matsuoka M and Ogumi Z: ‘Alkaline direct alcohol fuel cells using an anion exchange membrane’, J. Power Sources, 2005, 150, 27–31.
  • Abdullah Mirzaie R and Eshghi A: ‘Study of methanol electro-oxidation on Ni and Ni-Pt/carbon paper electrodes for direct methanol fuel cell applications’, Surf. Eng., 2014, 30, 263–267.
  • Schneider M, Weiser M, Dörfler S, Althues H, Kaskel S and Michaelis A: ‘Pulse plating of platinum on aligned multiwalled carbon nanotubes’, Surf. Eng., 2013, 29, 427–433.
  • Peng X, Zhao Y, Chen D, Fan Y, Wang X, Wang W and Tian J: ‘One-pot synthesis of reduced graphene oxide supported PtCu catalysts with enhanced electro-catalytic activity for the methanol oxidation reaction’, Electrochim. Acta, 2014, 136, 292–300.
  • Zhang Y, Chang G, Shu H, Oyama M, Liu X and He Y: ‘Synthesis of Pt-Pd bimetallic nanoparticles anchored on graphene for highly active methanol electro-oxidation’, J. Power Sources, 2014, 262, 279–285.
  • Ren Y, Zhang S and Li H: ‘Electro-oxidation of methanol on SnO2-promoted Pd/MWCNTs catalysts in alkaline solution’, Int. J. Hydrogen Energy, 2014, 39, 288–296.
  • Rousseau S, Coutanceau C, Lamy C and Leger JM: ‘Direct ethanol fuel cell (DEFC): Electrical performances and reaction products distribution under operating conditions with different platinum-based anodes’, J. Power Sources, 2006, 158, 18–24.
  • Xu Y and Han L: ‘Comprehensive understanding of electro-oxidation of ethylene glycol’, Int. J. Hydrogen Energy, 2014, 39, 7278–7290.
  • Zhang Z, Xin L, Qi J, Chadderdon DJ, Sun K, Warsko KM and Li W: ‘Selective electro-oxidation of glycerol to tartronate or mesoxalate on Au nanoparticle catalyst via electrode potential tuning in anion-exchange membrane electro-catalytic flow reactor’, Appl. Catal. B, 2014, 147B, 871–878.
  • Ishiyama K, Kosaka F, Shimada I, Oshima Y and Otomo J: ‘Glycerol electro-oxidation on a carbon-supported platinum catalyst at intermediate temperatures’, J. Power Sources, 2013, 225, 141–149.
  • Zhang LJ and Wan MX: ‘Polyaniline/TiO2 composite nanotubes’, J. Phys. Chem. B, 2003, 107B, 6748–6753.
  • Gangopadhyay R and De A: ‘Conducting polymer nanocomposites: A brief overview’, Chem. Mater., 2000, 12, 608–622.
  • Huang M, Li Y, Zhang GF, Hou XD and Deng DW: ‘Electroplating of Ni-ZrO2 nanocomposite coatings on 40CrNiMo7 alloy’, Surf. Eng., 2013, 29, 194–199.
  • Qu NS, Hu XY, Qian WH and Zhu ZW: ‘Enhancement of microhardness and wear resistance of Ni-CeO2 nanocomposite coatings’, Surf. Eng., 2014, 30, 159–164.
  • Sattari S, Reyhani A, Khanlari MR, Khabazian M and Heydari H: ‘Synthesize of polyaniline-multi walled carbon nanotubes composite on the glass and silicon substrates and methane gas sensing behavior of them at room temperature’, J. Ind. Eng. Chem., 2014, 20, 1761–1764.
  • Bavio MA, Acosta GG and Kessler T: ‘Synthesis and characterization of polyaniline and polyaniline-Carbon nanotubes nanostructures for electrochemical supercapacitors’, J. Power Sources, 2014, 245, 475–481.
  • Li J, Liu L, Zhang D, Yang D, Guo J and Wei J: ‘Fabrication of polyaniline/silver nanoparticles/multi-walled carbon nanotubes composites for flexible microelectronic circuits’, Synth. Met., 2014, 92, 15–22.
  • Sharma S, Hussain S, Singh S and Islam SS: ‘MWCNT-conducting polymer composite based ammonia gas sensors: A new approach for complete recovery processes’, Sens. Actuators B-Chem., 2014, 194B, 213–219.
  • Hosseini MG, Momeni MM and Zeynali S: ‘Gold nanoparticles deposited on polyaniline nanofibres as for electro-oxidation of hydrazine’, Surf. Eng., 2013, 29, 65–69.
  • Gomes JF, Castelo de Paula FB, Gasparotto LHS and Tremiliosi-Filho G: ‘The influence of the Pt crystalline surface orientation on the glycerol electro-oxidation in acidic media’, Electrochim. Acta, 2012, 76, 88–93.
  • Kwon Y, Birdja Y, Spanos I, Rodriguez P and Koper MTM: ‘Highly selective electro-oxidation of glycerol to dihydroxyacetone on platinum in the presence of bismuth’, Electrocatalysis, 2012, 2, 759–764
  • Bard AJ and Faulkner LR: ‘Elecrochemical methods fundamentals and applications’, 2nd edn; 2014, New York, Wiley.
  • Habibi B and Delnavaz N: ‘Electro-catalytic oxidation of formic acid and formaldehyde on platinum nanoparticles decorated carbon-ceramic substrate’, Int. J. Hydrogen Energy, 2010, 35, 8831–8840.
  • Habibi B and Dadashpour E: ‘Carbon-ceramic supported bimetallic Pt-Ni nanoparticles as an electro-catalyst for electro-oxidation of methanol and ethanol in acidic media’, Int. J. Hydrogen Energy, 2013, 38, 5425–5434.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.