Structure and properties of Ni–P–graphite (C_g)–TiO₂ composite coating

References

• Krishnan KH, John S, Srinivasan KN, Praveen J, Ganesan M and Kavimani PM: ‘An overall aspect of electroless Ni-P depositions – a review article’, Metall. Mater. Trans. A, 2006, 37A, (6), 1917–1926.
   Web of Science ®Google Scholar
• Wang Y, Kang M, Jin S, Fu X and Wang X: ‘Electrochemical behaviour in process of electrodeposition Ni-P alloy coating’, Surf. Eng., 2014, 30, (8), 557–561.
   Web of Science ®Google Scholar
• Araghi A and Paydar MH: ‘Electroless deposition of Ni–W–P–B4C nanocomposite coating on AZ91D magnesium alloy and investigation on its properties’, Vacuum, 2013, 89, 67–70.
   Web of Science ®Google Scholar
• Tabatabaei F, Raeissi K, Saatchi A, Kazmanli K and Ürgen M: ‘Effect of heat treatment on tribocorrosion of nanostructure Ni-P coatings’, Surf. Eng., 2013, 29, (9), 671–676.
   Web of Science ®Google Scholar
• Wang H.-L, Liu L.-Y, Dou Y, Zhang W.-Z and Jiang W.-F: ‘Preparation and corrosion resistance of electroless Ni-P/SiC functionally gradient coatings on AZ91D magnesium alloy’, Appl. Surf. Sci., 2013, 286, 319–327.
   Web of Science ®Google Scholar
• Zarebidaki A and Allahkaram S: ‘Porosity measurement of electroless Ni-P coatings reinforced by CNT or SiC particles’, Surf. Eng., 2012, 28, (6), 400–405.
   Web of Science ®Google Scholar
• Aghaie E, Najafi A, Maleki-Ghaleh H and Mohebi H: ‘Effect of SiC concentration in electrolyte on Ni-SiC composite coating properties’, Surf. Eng., 2013, 29, (3), 177–182.
   Web of Science ®Google Scholar
• Mokabber T, Rastegari S and Razavizadeh H: ‘Effect of electroplating parameters on properties of Zn-nano-TiO2 composite coatings’, Surf. Eng., 2013, 29, (1), 41–45.
   Web of Science ®Google Scholar
• Farzaneh A, Mohammadi M, Ehteshamzadeh M and Mohammadi F: ‘Electrochemical and structural properties of electroless Ni-P-SiC nanocomposite coatings’, Appl. Surf. Sci., 2013, 276, 697–704.
   Web of Science ®Google Scholar
• Straffelini G, Colombo D and Molinari A: ‘Surface durability of electroless Ni–P composite deposits’, Wear, 1999, 236, (1–2), 179–188.
   Web of Science ®Google Scholar
• Huang YS, Zeng XT, Annergren I and Liu FM: ‘Development of electroless NiP–PTFE–SiC composite coating’, Surf. Coat. Technol., 2003, 167, (2–3), 207–211.
   Web of Science ®Google Scholar
• Łosiewicz B, Stepień A, Gierlotka D and Budniok A: ‘Composite layers in Ni–P system containing TiO2 and PTFE’, Thin Solid Films, 1999, 349, (1–2), 43–50.
   Web of Science ®Google Scholar
• Baghery P, Farzam M, Mousavi AB and Hosseini M: ‘Ni–TiO2 nanocomposite coating with high resistance to corrosion and wear’, Surf. Coat. Technol., 2010, 204, (23), 3804–3810.
   Web of Science ®Google Scholar
• Ankita S and Singh A: ‘Corrosion and wear resistance study of Ni-P and Ni-P-PTFE nanocomposite coatings’, Cent. Eur. J. Eng., 2011, 1, (3), 234–243.
   Google Scholar
• Balaraju JN, Sankara Narayanan TSN and Seshadri SK: ‘Electroless Ni–P composite coatings’, J. Appl. Electrochem., 2003, 33, (9), 807–816.
   Web of Science ®Google Scholar
• Bindra P, Roldan JM and Arbach GV: ‘Mechanisms of electroless metal plating: II. Decomposition of formaldehyde’, IBM J. Res. Develop., 1984, 28, (6), 679–689.
   Web of Science ®Google Scholar
• Kim YB and Park H: ‘Synthesis of amorphous/crystalline composite using electroless copper plated amorphous powder’, Mater. Sci. Eng. A, 2005, A396, (1), 166–171.
   Google Scholar
• Dugasz J and Szasz A: ‘Factors affecting the adhesion of electroless coatings’, Surf. Coat. Technol., 1993, 58, (1), 57–62.
   Web of Science ®Google Scholar
• Abrantes L and Correia J: ‘On the mechanism of electroless Ni–P plating’, J. Electrochem. Soc., 1994, 141, (9), 2356–2360.
   Web of Science ®Google Scholar
• Brenner A and Riddell GE: ‘Nickel plating on steel by chemical reduction’, J. Res. Natl. Bur. Stand.(US), 1946, 37, 31.
   Google Scholar
• Meerakker JEAM: ‘On the mechanism of electroless plating. II. One mechanism for different reductants’, J. Appl. Electrochem., 1981, 11, (3), 395–400.
   Web of Science ®Google Scholar
• Masui K, Tachihara M, Yamada T and Tsujimoto T: ‘Phase-separation behaviour of electrodeposited Ni–P amorphous alloys’, J. Jpn Inst. Met., 1980, 44, (2), 124–131.
   Web of Science ®Google Scholar
• Liu B, Liu L and Liu X: ‘Effects of carbon nanotubes on hardness and internal stress in Ni-P coatings’, Surf. Eng., 2013, 29, (7), 507–510.
   Web of Science ®Google Scholar
• Hall E: ‘The deformation and ageing of mild steel: III discussion of results’, Proceed. Phys. Soc. B, 1951, 64B, (9), 747.
   Google Scholar
• Papachristos V, Panagopoulos C, Wahlstrom U, Christoffersen L and Leisner P: ‘Effect of annealing on the structure and hardness of Ni–P–W multilayered alloy coatings produced by pulse plating’, Mater. Sci. Eng. A, 2000, 279, (1), 217–230.
   Web of Science ®Google Scholar
• Zeller R III and Salvati L Jr: ‘Effects of phosphorus on corrosion resistance of electroless nickel in 50% sodium hydroxide’, Corrosion, 1994, 50, (6), 457–467.
   Web of Science ®Google Scholar
• Chen B.-H, Hong L, Ma Y and Ko T.-M: ‘Effects of surfactants in an electroless nickel-plating bath on the properties of Ni-P alloy deposits’, Industr. Eng. Chem. Res., 2002, 41, (11), 2668–2678.
   Web of Science ®Google Scholar
• Wang L, Chen H and Chen Z: ‘Study on post-treatments for electroless Ni-P coating’, Surf. Eng., 2011, 27, (1), 57–60.
   Web of Science ®Google Scholar
• Song Y, Shan D and Han E: ‘Comparative study on corrosion protection properties of electroless Ni–P–ZrO2 and Ni–P coatings on AZ91D magnesium alloy’, Mater. Corros., 2007, 58, (7), 506–510.
   Web of Science ®Google Scholar