Effect of microtexturing on tribological performance of Ni/Ni–SiC composite coatings

References

• Ramesh Bapu G. N. K. and Jayakrishnan S.: ‘Development and characterization of electro deposited nickel–titanium carbo nitride (TiCN) metal matrix nanocomposite deposits’, Surf. Coat. Technol., 2012, 206, 2330–2336.
   Web of Science ®Google Scholar
• Gyawali G., Hamal K., Joshi B., Rajbhandari A. and Wohn Lee S.: ‘Microstructural and electrochemical analysis of Ni–SiC composite coatings prepared in presence of additives’, Mater. Lett., 2014, 126, 228–231.
   Web of Science ®Google Scholar
• Srivastava M., William Grips V. K. and Rajam K. S.: ‘Influence of SiC, Si3N4 and Al2O3 particles on the structure and properties of electrodeposited’, Ni. Mater. Lett., 2008, 62, 3487–3489.
   Web of Science ®Google Scholar
• Baghery P., Farzam M., Mousavi A. B. and Hosseini M.: ‘Ni–TiO2 nanocomposite coating with high resistance to corrosion and wear’, Surf. Coat. Technol., 2010, 204, 3804–3810.
   Web of Science ®Google Scholar
• Carpenter C. R., Shipway P. H. and Zhu Y.: ‘Electrodeposition of nickel–carbon nanotube nanocomposite coatings for enhanced wear resistance’, Wear, 2011, 271, 2100–2105.
   Web of Science ®Google Scholar
• Low C. T. J., Wills R. G. A. and Walsh F. C.: ‘Electrodeposition of composite coatings containing nanoparticles in a metal deposit’, Surf. Coat. Technol., 2006, 201, 371–383.
   Web of Science ®Google Scholar
• Aghaie E., Najafi A., Maleki-Ghaleh H. and Mohebi H.: ‘Effect of SiC concentration in electrolyte on Ni–SiC composite coating properties’, Surf. Eng., 2013, 29, 177–182.
   Web of Science ®Google Scholar
• Gyawali G., Cho S. H. and Lee S. W.: ‘Electrodeposition and characterization of Ni–TiB2 composite coatings’, Met. Mater. Int., 2013, 19, 113–118.
   Web of Science ®Google Scholar
• Benea L., Wenger F., Ponthiaux P. and Celis J. P.: ‘Tribocorrosion behaviour of Ni–SiC nano-structured composite coatings obtained by electrodeposition’, Wear, 2009, 266, 398–405.
   Web of Science ®Google Scholar
• Andersson P., Koskinen J., Varjus S., Gerbig Y., Haefke H., Georgiou S., Zhmud B. and Buss W.: ‘Microlubrication effect by laser-textured steel surfaces’, Wear, 2007, 262, 369–379.
   Web of Science ®Google Scholar
• Wakuda M., Yamauchi Y., Kanzaki S. and Yasuda Y.: ‘Effect of surface texturing on friction reduction between ceramic and steel materials under lubricated sliding contact’, Wear, 2003, 254, 356–363.
   Web of Science ®Google Scholar
• Dumitru G., Romano V., Weber H. P., Haefke H., Gerbig Y. and Pflüger E.: ‘Laser microstructuring of steel surfaces for tribological applications’, Appl. Phys. A., 2000, 70A, 485–487.
   Web of Science ®Google Scholar
• Basnyat P., Luster B., Muratore C., Voevodin A. A., Haasch R., Zakeri R., Kohli P. and Aouadi S. M.: ‘Surface texturing for adaptive solid lubrication’, Surf. Coat. Technol., 2008, 203, 73–79.
   Web of Science ®Google Scholar
• Gerbig Y. B., Ahmed S. I. U., Chetwynd D. G. and Haefke H.: ‘Topography-related effects on the lubrication of nanostructured hard surfaces’, Tribol. Int., 2006, 39, 945–952.
   Web of Science ®Google Scholar
• Dumitru G., Romano V., Weber H. P., Sentis M., Hermann J., Bruneau S., Marine W., Haefke H. and Gerbig Y.: ‘Metallographical analysis of steel and hard metal substrates after deep-drilling with femtosecond laser pulses’, Appl. Surf. Sci., 2003, 208–209, 181–188.
   Web of Science ®Google Scholar
• Golloch R., Merker G. P., Kessen U. and Brinkmann S.: ‘Benefits of laser structured cylinder liners for internal combustion engines’, in ‘Proc. 14th Int. Colloq. on ‘Tribology—tribology and lubrication engineering’, Ostfildern, Germany, January 2004 vol. I’, (ed. Bartz W.., 321–328; 2004.
   Google Scholar
• Neudecker T., Popp U., Schraml T., Engel U. and Geiger M.: ‘Towards optimized lubrication by micro texturing of tool surfaces’, in ‘Proc. 6th ICTP, Berlin, Germany, September 1999, Advanced Technology of Plasticity, Vol. I’, 619–626; 1999.
   Google Scholar
• García-Lecina E., García-Urrutia I., Díez J. A., Salvo M., Smeacetto F., Gautier G., Seddon R. and Martin R.: ‘Electrochemical preparation and characterization of Ni/SiC compositionally graded multilayered coatings’, Electrochim. Acta, 2009, 54, 2556–2562.
   Web of Science ®Google Scholar
• Srivastava M., Grips V. K. W. and Rajam K. S.: ‘Electrochemical deposition and tribological behaviour of Ni and Ni–Co metal matrix composites with SiC nano-particles’, Appl. Surf. Sci., 2007, 253, 3814–3824.
   Web of Science ®Google Scholar
• Pavlatou E. A. and Spyrellis N.: ‘Influence of pulse plating conditions on the structure and properties of pure and composite nickel nanocrystalline coatings’, Russ. J. Electrochem., 2008, 44, 745–754.
   Web of Science ®Google Scholar
• Kilic F., Gul H., Aslan S., Alp A. and Akbulut H.: ‘Effect of CTAB concentration in the electrolyte on the tribological properties of nanoparticle SiC reinforced Ni metal matrix composite (MMC) coatings produced by electrodeposition’, Colloids Surf. A, 2013, 419A, 53–60.
   Web of Science ®Google Scholar
• Fazel M., Garsivaz Jazi M. R., Bahrmzadeh S., Bakhshi S. R. and Ramazani M.: ‘Effect of solid lubricant particles on room and elevated temperature tribological properties of Ni–SiC composite coating’, Surf. Coat. Technol., 2014, 254, 252–259.
   Web of Science ®Google Scholar