Protective coatings for mechanical aluminum–magnesium joints

References

• Ghassemieh E.: ‘Materials in automotive application, state of the art and prospects’, in ‘New trends and developments in automotive industry’; 2011, Rijeka, Croatia, InTech.
   Google Scholar
• James M., Kihiu J. M. and Rading G. O.: ‘Automobile weight optimization using magnesium alloy AZ31B’, Proc. of the 2012 Mechanical Engineering Conference on Sustainable Research and Innovation 4, ; 2012.
   Google Scholar
• Xiao L., Liu L., Chen D. L., Esmaeili S. and Zhou Y.: ‘Resistance spot weld fatigue behavior and dislocation substructures in two different heats of AZ31 magnesium alloy’, Mater. Sci. Eng. A, 2011, A529, 81–87.
   Google Scholar
• Neugebauer R., Kraus C. and Dietrich S.: ‘Advances in mechanical joining of magnesium’, Proc. Conf. CIRP Manuf. Technol., 2008, 57, 283–286.
   Web of Science ®Google Scholar
• Gerstmayr M. and Eichlseder L.: ‘On the applicability of high strength self-tapping aluminum bolts in magnesium nut materials for automotive applications’, Mater. Corros., 2010, 61, (5), 379–387.
   Web of Science ®Google Scholar
• Han S., Wu Y., Gao Y. and Zeng Q.: ‘Study on clinching of magnesium alloy sheets with different lower die parameters based on DEFORM 2D’, Proc. 2nd International Conference on Electronic & Mechanical Engineering and Information Technology (EMEIT-2012).
   Google Scholar
• Westphal K. and Mulherkar T.: ‘Joining of magnesium components using Al fasteners’, Light Met. Age, 2005, 4, (63), 42–44.
   Google Scholar
• Deinzer G. H.: ‘Joining mechanisms’, in ‘Magnesium technology: metallurgy, design data, applications’, 699; 2006, Berlin, Springer-Science.
   Google Scholar
• Chakherlou T. N., Razavi M. J., Aghdam A. B. and Abazadeh B.: ‘An experimental investigation of the bolt clamping force and friction effect on the fatigue behaviour of aluminum alloy 2024-T3 double shear lap joint’, Mater. Des., 2011, 32, 4641–4649.
   Web of Science ®Google Scholar
• Ibrahim R. A. and Pettit C. L.: ‘Uncertainties and dynamic problems of bolted joints and other fasteners’, J. Sound Vib., 2005, 279, 857–936.
   Web of Science ®Google Scholar
• Difallah B. B., Kharrat M., Dammak M. and Monteil G.: ‘Microstructure, friction and wear analysis of thermoplastic based composites with solid lubricant’, Mech. Ind., 2012, 13, (5), 337–346.
   Web of Science ®Google Scholar
• Korsunsky A., Torosyan A. R. and Kim K.: ‘Development and characterization of low-friction coatings for protection against fretting wear in aerospace components’, Met. Finish., 2009, 107, (2), 45–52.
   Google Scholar
• Ghali E.: ‘Corrosion resistance of aluminum and magnesium alloys: understanding, performance, and testing’, 140; 2010, Hoboken, NJ, John Wiley & Sons.
   Google Scholar
• Pan T. and Santella M.: ‘Corrosion behavior of mixed-metal joint of magnesium to mild steel by ultrasonic spot welding’, SAE Technical Paper 2012-01-0472; 2012.
   Google Scholar
• Kainer K. U. and Kaiser F.: ‘Magnesium alloys and technology’; 2003, Weinheim, Wiley-VCH GmbH.
   Google Scholar
• Jia J. X., Song G. L. and Atrens A.: ‘Influence of geometry on galvanic corrosion of AZ91D coupled to steel’, Corros. Sci., 2006, 48, 2133–2153.
   Web of Science ®Google Scholar
• Baldwin K. R., Robinson M. J. and Smith C. J. E.: ‘The corrosion behavior of electrodeposited zinc–nickel alloy coatings on exposure to the marine atmosphere’, Proc. Conf. UK Corrosion 94, Institute of Corrosion 3, 165–175; 1994, Bournemouth, UK, The Chameleon Press, London.
   Google Scholar
• Tang J. and Azumi K.: ‘Effect of copper pretreatment on the zincate process and subsequent copper electrodeposition of AZ31 magnesium alloy’, J. Electrochem. Soc., 2011, 158, (9), 535–540.
   Google Scholar
• Pokhmurska H., Wielage B., Lampke T., Grund T. and Chervinska N.: Surf. Coat. Technol., 2008, 202, (18), 4515–4524.
   Web of Science ®Google Scholar
• Papyrin A., Kosarev V., Klinkov S., Alkhimov A. and Fomin V. M.: ‘Cold spray technology’, 336; 2006, Amsterdam, Elsevier.
   Google Scholar
• Champane V.: ‘The cold spray materials deposition process’; 2007, Cambridge, Woodhead Publishing Ltd.
   Google Scholar
• Maev R. G. and Leshchinsky V.: ‘Low pressure gas dynamic spray: shear localization during particle shock consolidation’, Proc. Conf. 2006 International Thermal Spray Conference, May 15–18; 2006, (Seattle, WA, USA), ASM International.
   Google Scholar
• Attia H., Meshreki M., Korsany A., Thomson V. and Chang V.: ‘Fretting wear characteristic of cold gas-dynamic sprayed aluminum alloys’, Tribol. Int., 2011, 44, 1407–1416.
   Web of Science ®Google Scholar
• Jia J. X., Atrens A. and Song G.: ‘Simulation of galvanic corrosion of magnesium coupled to a steel fastener in NaCl solution’, Mater. Corros., 2005, 56, 468–474.
   Web of Science ®Google Scholar
• Ismail K. M. and Virtanen S.: ‘Electrochemical behavior of magnesium alloy AZ31 in 0·5 M KOH solution’, Electrochem. Solid-State Lett., 2007, 10, (3), 9–11.
   Google Scholar
• Salman S. A., Ichino R. and Okido M.: ‘A comparative electrochemical study of AZ31 and AZ91 magnesium alloy’, Int. J. Corros., 2010, 2010, 412129.
   Google Scholar
• Shi Z. and Atrens A.: ‘An innovative specimen configuration for the study of Mg corrosion’, Corros. Sci., 2011, 53, 226–246.
   Web of Science ®Google Scholar
• Sherif El-Sayed M.: ‘Corrosion and corrosion inhibition of aluminum in Arabian gulf seawater and sodium chloride solutions by 3-amino-5-mercapto-1,2,4-triazole’, Int. J. Electrochem. Sci., 2011, 6, 1479–1492.
   Web of Science ®Google Scholar
• Dzhurinskiy D., Maeva E. and Maev R. G.: ‘Corrosion protection of light alloys using low pressure cold spray’, J. Therm. Spray Technol., 2012, 21, (2), 304–313.
   Web of Science ®Google Scholar
• Jiang Y. F., Zhai C. Q. and Liu L. F.: ‘Zn–Ni coatings pulse-plated on magnesium alloy’, Surf. Coat. Technol., 2005, 191, 393–399.
   Web of Science ®Google Scholar
• Song G. L. and Atrens A.: ‘Understanding magnesium corrosion—a framework for improved alloy performance’, Adv. Eng. Mater., 2003, 5, 837–858.
   Web of Science ®Google Scholar
• Breslin C. B., Treacy G. and Cornell W. M.: ‘Studies on the passivation of aluminium in chromate and molybdate solutions’, Corros. Sci., 1994, 36, (7), 1143–1154.
   Web of Science ®Google Scholar
• Bonora P. L., Andrei M., Eliezer A. and Gutman E. M.: ‘Mechanoelectrochemical behavior and creep corrosion of magnesium alloys’, Corros. Sci., 2002, 44, 729.
   Web of Science ®Google Scholar
• Müller C., Sarret M. and Benballa M.: ‘Some peculiarities in the codeposition of zinc–nickel alloys’, Electrochim. Acta, 2001, 46, 2811.
   Web of Science ®Google Scholar
• Abdel A.: ‘Protective coating for magnesium alloy’, J. Mater. Sci., 2008, 43, 2947–2954.
   Web of Science ®Google Scholar
• Pardo A., Merino M. C., Coy A. E. and Arrabal R.: ‘Corrosion behaviour of magnesium/aluminium alloys in 3·5 wt% NaCl’, Corros. Sci., 2008, 50, 823.
   Web of Science ®Google Scholar
• DeForce B., Eden T., Potter J., Champagne V., Leyman P. and Helfritch D.: ‘Application of aluminum coatings for the corrosion protection of magnesium by cold spray’, Proc. Conf. 2007 tri-service corrosion conference.
   Google Scholar
• Spencer K., Fabijanic D. M. and Zhang M. X.: ‘The use of Al–Al2O3 cold spray coatings to improve the surface properties of magnesium alloys’, Surf. Coat. Technol., 2009, 204, 336–344.
   Web of Science ®Google Scholar
• Nguyen N., Seo O. S., Lee C. A., Lee M., Kim J. and Kim H. Y.: ‘Mechanical behavior of AZ31B Mg alloy sheets under monotonic and cyclic loadings at room and moderately elevated temperatures’, Materials, 2014, 7, 1271–1295.
   Web of Science ®Google Scholar