Pulse electrocodeposition of Ni/MWCNT nanocomposite coatings

References

• Casagrande T., Lawson G., Li H., Wei J., Adronov A. and Zhitomirsky I.: ‘Electrodeposition of composite materials containing functionalized carbon nanotubes’, Mater. Chem. Phys., 2008, 111, 42–49.
   Web of Science ®Google Scholar
• Attarchi M. and Sadrnezhaad S. K.: ‘Pulse reverse electrodeposition of spherical Ni-MWCNT composite skein’, IJE Trans. B, 2009, 22B, 161–168.
   Google Scholar
• Khabazian S. and Sanjabi S.: ‘The effect of multi-walled carbon nanotube pretreatments on the electrodeposition of Ni-MWCNTs coatings’, Appl. Surf. Sci., 2011, 257, 5850–5856.
   Web of Science ®Google Scholar
• Dai P. Q., Xu W. C. and Huang Q. Y.: ‘Mechanical properties and microstructure of nanocrystalline nickel-carbon nanotube composites produced by electrodeposition’, Mater. Sci. Eng. A, 2008, A483-A484, 172–174.
   Google Scholar
• Meyers M. A., Mishra A. and Benson D. J.: ‘Mechanical properties of nanocrystalline materials’, Prog. Mater. Sci., 2006, 51, 427–556.
   Web of Science ®Google Scholar
• Kim S. K. and Oh T. S.: ‘Electrodeposition behavior and characteristics of Ni-carbon nanotube composite coatings’, Trans. Nonferr. Met. Soc. China, 2011, 21, 68–72.
   Web of Science ®Google Scholar
• Alishahi M., Monirvaghefi S. M., Saatchi A. and Hosseini S. M.: ‘The effect of carbon nanotubes on the corrosion and tribological behavior of electroless Ni-P-CNT composite coating’, Appl. Surf. Sci., 2012, 258, 2439–2446.
   Web of Science ®Google Scholar
• Zarebidaki A. and Allahkaram S. R.: ‘Effect of surfactant on the fabrication and characterization of Ni-P-CNT composite coatings’, J. Alloys Compd, 2011, 509, 1836–1840.
   Web of Science ®Google Scholar
• Jeon Y. S., Byun J. Y. and Oh T. S.: ‘Electrodeposition and mechanical properties of Ni-carbon nanotube nanocomposite coatings’, J. Phys. Chem. Solids, 2008, 69, 1391–1394.
   Web of Science ®Google Scholar
• Chen X. H., Chen C. S., Xiao H. N., Cheng F. Q., Zhang G. and Yi G. J.: ‘Corrosion behavior of carbon nanotubes-Ni composite coating’, Surf. Coat. Technol., 2005, 191, 351–356.
   Web of Science ®Google Scholar
• Jiang X., Liu W., Li J., Shao Z. and Zhu D.: ‘Microstructures and mechanical properties of Cu/Ti3SiC2/C/MWCNTs composites prepared by vacuum hot-pressing sintering’, J. Alloys Compd, 2015, 618, 700–706.
   Web of Science ®Google Scholar
• Esawi A. M. K., Morsi K., Sayed A., Taher M. and Lanka S.: ‘Effect of carbon nanotube (CNT) content on the mechanical properties of CNT-reinforced aluminium composites’, Compos. Sci. Technol., 2010, 70, 2237–2241.
   Web of Science ®Google Scholar
• Habibi M. K. and Hamouda A. M. S.: ‘Enhancing tensile and compressive strength of magnesium using ball milled Al+CNT reinforcement’, Compos. Sci. Technol., 2012, 72, 290–298.
   Web of Science ®Google Scholar
• Li C. D., Wang X. J., Liu W. Q., Shi H. L., Ding C., Hu X. S., Zheng M. Y. and Wu K.: ‘Effect of solidification on microstructures and mechanical properties of carbon nanotubes reinforced magnesium matrix composite’, Mater. Des., 2014, 58, 204–208.
   Web of Science ®Google Scholar
• Tsai P. C. and Jeng Y. R.: ‘Experimental and numerical investigation into the effect of carbon nanotube buckling on the reinforcement of CNT/Cu composites’, Compos. Sci. Technol., 2013, 79, 28–34.
   Web of Science ®Google Scholar
• Laha T., Chen Y., Lahiri D. and Agarwal A.: ‘Tensile properties of carbon nanotube reinforced aluminum nanocomposite fabricated by plasma spray forming’, Composites A, 2009, 40A, 589–594.
   Web of Science ®Google Scholar
• Pialago E. J. T. and Park C. W.: ‘Cold spray deposition characteristics of mechanically alloyed Cu-CNT composite powders’, Appl. Surf. Sci., 2014, 308, 63–74.
   Web of Science ®Google Scholar
• Bakshi S., Singh V., Balani K., McCartney D., Seal S. and Agarwal A.: ‘Carbon nanotube reinforced aluminum composite coating via cold spraying’, Surf. Coat. Technol., 2008, 202, 5162–5169.
   Web of Science ®Google Scholar
• Bakshi S., Singh V., Seal S. and Agarwal A.: ‘Aluminum composite reinforced with multiwalled carbon nanotubes from plasma spraying of spray dried powders’, Surf. Coat. Technol., 2009, 203, 1544–1554.
   Web of Science ®Google Scholar
• Tocoglu U., Alaf M., Cevher O., Guler M. O. and Akbulut H.: ‘The effect of oxidants on the formation of multi-walled carbon nanotube bucky paper’, J. Nanosci. Nanotechnol., 2012, 12, 9169–9174.
   PubMed Web of Science ®Google Scholar
• Guo C., Zuo Y., Zhao X. and Xiong J.: ‘Effects of surfactants on electrodeposition of nickel-carbon nanotubes composite coatings’, Surf. Coat. Technol., 2007, 201, 9491–9496.
   Web of Science ®Google Scholar
• Uysal M., Cetinkaya T., Kartal M., Alp A. and Akbulut H.: ‘Production of Sn-Cu/MWCNT composite electrodes for Li-ion batteries by using electroless tin coating’, Thin Solid Films, 2014, 572, 216–223.
   Web of Science ®Google Scholar
• Arai S., Endo M. and Kaneko N.: ‘Ni-deposited multi-walled carbon nanotubes by electrodeposition’, Carbon, 2004, 42, 641–644.
   Web of Science ®Google Scholar
• Golovin Yu. I., Golovin D. Yu, Shuklinov A. V., Stolyarov R. A. and Vasyukov V. M.: ‘Electrodeposition of nickel nanoparticles onto multiwalled carbon nanotubes’, Tech. Phys. Lett., 2011, 37, 21–26.
   Google Scholar
• Yang Y. J.: ‘Morphological and compositional engineering of Ni/carbon nanotube composite film via a novel cyclic voltammetric route’, Bull. Mater. Sci., 2012, 35, 513–517.
   Web of Science ®Google Scholar
• Alaf M., Guler M. O., Gultekin D., Uysal M., Alp A. and Akbulut H.: ‘Effect of oxygen partial pressure on the microstructural and physical properties on nanocrystalline tin oxide films grown by plasma oxidation after thermal deposition from pure Sn targets’, Vacuum, 2009, 83, 292–301.
   Web of Science ®Google Scholar
• Kılıc F., Gül H., Aslan S., Alp A. and Akbulut H.: ‘Effect of CTAB concentration in the electrolyte on the tribological properties of nanoparticle SiC reinforced Ni metal matrix composite (MMC) coatings produced by electrodeposition’, Colloids Surf. A, 2013, 419A, 53–60.
   Web of Science ®Google Scholar
• Pavlatou E. A., Raptakis M. and Spyrellis N.: ‘Synergistic effect of 2-butyne-1,4-diol and pulse plating on the structure and properties of nickel nanocrystalline deposits’, Surf. Coat. Technol., 2007, 201, 4571–4577.
   Web of Science ®Google Scholar
• Lampke T., Wielage B., Dietrich D. and Leopold A.: ‘Interface behaviour in nickel composite coatings with nano-particles of oxidic ceramic’, Appl. Surf. Sci., 2006, 253, 2399–2408.
   Web of Science ®Google Scholar
• Gyftou P., Pavlatou E. A. and Spyrellis N.: ‘Effect of pulse electrodeposition parameters on the properties of Ni/nano-SiC composites’, Appl. Surf. Sci., 2008, 254, 5910–5916.
   Web of Science ®Google Scholar
• Gul H., Kılıç F., Aslan S., Alp A. and Akbulut H.: ‘Characteristics of electro-co-deposited Ni-Al2O3 nano-particle reinforced metal matrix composite (MMC) coatings’, Wear, 2009, 267, 976–990.
   Web of Science ®Google Scholar
• Lee C. M., Hwang S. M., Park G. C., Kim J. C., Lim J. H., Joo J., Jung S. and Kim Y. S.: ‘Effect of peak current density on the mechanical and electrical properties of copper/polymide fabricated by a pulsed electrodeposition process’, Curr. Appl Phys., 2011, 11, 128–131.
   Google Scholar
• Misbah-Ul I., Hashmi K. A., Rana M. U. and Abbas T.: ‘Measurement of exchange interaction in Ti-substituted Ni-ferrites’, Solid State Commun., 2002, 121, 51–54.
   Web of Science ®Google Scholar
• Hussain S. and Pal A. K.: ‘Incorporation of nanocrystalline silver on carbon nanotubes by electrodeposition technique’, Mater. Lett., 2008, 62, 1874–1877.
   Web of Science ®Google Scholar
• Wu X., Tao Y., Lu Y., Dong L. and Hu Z.: ‘High-pressure pyrolysis of melamine route to nitrogen-doped conical hollow and bamboo-like carbon nanotubes’, Diamond Relat. Mater., 2006, 15, 164–170.
   Web of Science ®Google Scholar
• Su F., Liu C. and Huang P.: ‘Ultrasound-assisted pulse electrodeposition and characterization of Co-W/MWCNTs nanocomposite coatings’, Appl. Surf. Sci., 2014, 309, 200–208.
   Web of Science ®Google Scholar
• Suárez S., Rosenkranz A., Gachot C. and Mücklich F.: ‘Mechanical properties of MWNT/Ni bulk composites: influence of the microstructural refinement on the hardness’, Carbon, 2014, 66, 164–171.
   Web of Science ®Google Scholar
• Gül H., Kılıç F., Uysal M., Aslan S., Alp A. and Akbulut H.: ‘Effect of particle concentration on the structure and tribological properties of submicron particle SiC reinforced Ni metal matrix composite (MMC) coatings produced by electrodeposition’, Appl. Surf. Sci., 2012, 258, 4260–4267.
   Web of Science ®Google Scholar