References
- N. Serres, F. Hlawka, S. Costil, C. Langlade and F. Machi: J. Therm. Spray Technol., 2011, 20, (1-2), 336–343. doi: 10.1007/s11666-010-9565-1
- Z. Bergant and J. Grum: J. Therm. Spray Technol., 2009, 18, (3), 380–391. doi: 10.1007/s11666-009-9304-7
- H. Du, S. W. Lee and J. H. Shin: J. Therm. Spray Technol., 2005, 14, (4), 453–461. doi: 10.1361/105996305X76450
- M. Cherigui, S. Guessasma, N. Fenineche, R. Hamzaoui, O. El-Kedim and C. Coddet: Mater. Chem. Phys., 2005, 92, (2), 419–423. doi: 10.1016/j.matchemphys.2005.01.047
- P. S. Phani, D. S. Rao, S. Joshi and G. Sundararajan: J. Therm. Spray Technol., 2007, 16, (3), 425–434. doi: 10.1007/s11666-007-9048-1
- Z. Wang, A. Kulkarni, S. Deshpande, T. Nakamura and H. Herman: Acta Mater., 2003, 51, (18), 5319–5334. doi: 10.1016/S1359-6454(03)00390-2
- J. A. Gan and C. C. Berndt: Metall. Mater. Trans. A, 2013, 44A, (10), 4844–4858. doi: 10.1007/s11661-013-1818-4
- C. Ramachandran, V. Balasubramanian and P. Ananthapadmanabhan: Surf. Eng., 2011, 27, (3), 217–229. doi: 10.1179/1743294410Y.0000000006
- X. Zheng, J. Kim and C. Park: ‘Multiwall carbon nanotube/copper porous coating for heat transfer application’, Surf. Eng., 2015, DOI, 101179/1743294415Y0000000030.
- Q. Luo, Q. Cai, J. He, X. Li and X. Chen: Adv. Appl. Ceram., 2014, 113, (4), 228–233. doi: 10.1179/1743676114Y.0000000143
- U. Batra: Surf. Eng., 2009, 25, (4), 284–286. doi: 10.1179/174329407X215087
- A. S. M. Ang and C. C. Berndt: Int. Mater. Rev., 2014, 59, (4), 179–223. doi: 10.1179/1743280414Y.0000000029
- J. A. Gan, C. C. Berndt, Y. C. Wong and J. Wang: J. Therm. Spray Technol., 2013, 22, (2-3), 337–344. doi: 10.1007/s11666-012-9819-1
- ‘Standard guide for metallographic preparation of thermal sprayed coatings’, ‘ E1920’; 2003, West Conshohocken, PA, USA, ASTM.
- ‘Test method for determining area percentage porosity in thermal sprayed coating’, ‘ E2109’; 2003, West Conshohocken, PA, USA, ASTM.
- M. Rodriguez, M. Staia, L. Gil, F. Arenas and A. Scagni: Surf. Eng., 2000, 16, (5), 415–420. doi: 10.1179/026708400101517404
- T. Gómez-del Río, M. Garrido, J. Fernandez, M. Cadenas and J. Rodríguez: J. Mater. Process. Technol., 2008, 204, (1), 304–312. doi: 10.1016/j.jmatprotec.2007.11.042
- R. Gonzalez, M. Cadenas, R. Fernandez, J. Cortizo and E. Rodríguez: Wear, 2007, 262, (3), 301–307. doi: 10.1016/j.wear.2006.05.009
- J. Miguel, J. Guilemany and S. Vizcaino: Tribol. Int., 2003, 36, (3), 181–187. doi: 10.1016/S0301-679X(02)00144-5
- M. Tobar, C. Alvarez, J. Amado, G. Rodríguez and A. Yáñez: Surf. Coat. Technol., 2006, 200, (22), 6313–6317. doi: 10.1016/j.surfcoat.2005.11.093
- H. J. Kim, S. Y. Hwang, C. -H. Lee and P. Juvanon: Surf. Coat. Technol., 2003, 172, (2), 262–269. doi: 10.1016/S0257-8972(03)00348-7
- M. Planche, H. Liao, B. Normand and C. Coddet: Surf. Coat. Technol., 2005, 200, (7), 2465–2473. doi: 10.1016/j.surfcoat.2004.08.224
- Z. Bergant and J. Grum: Image Anal. Stereol., 2011, 30, (1), 53–62. doi: 10.5566/ias.v30.p53-62
- S. H. Leigh and C. C. Berndt: J. Am. Ceram. Soc., 1999, 82, (1), 17–21. doi: 10.1111/j.1151-2916.1999.tb01717.x