Publication Cover
Advances in Applied Ceramics
Structural, Functional and Bioceramics
Volume 112, 2013 - Issue 4
523
Views
0
CrossRef citations to date
0
Altmetric
Guest Editorial

Non-Conventional Cementitious Binders

, &
Pages 177-178 | Published online: 22 Nov 2013

References

  • Mitsuuchi Tashima Mauro, Soriano Lourdes, Monzó José, María Victoria Borrachero, Jordi Paya, Novel geopolymeric material cured at room temperature, Advances in Applied Ceramics, 2013, 112(4), 179–183.
  • Ferone Claudio, Colangelo Francesco, Cioffi Raffaele, Montagnaro Fabio, Santoro Luciano, Use of Reservoir Clay Sediments as Raw Materials for Geopolymer Binders, Advances in Applied Ceramics, 2013, 112(4), 184–189.
  • van Deventer J.S.S., Provis J.L., Duxson P., Technical and commercial progress in the adoption of geopolymer cement, Minerals Engineering, (2012), 29, 89–104, DOI: 10.1016/j.mineng.2011.09.009.
  • Gordon L.E., Provis J.L., van Deventer J.S.J., Durability of fly ash/GGBFS based geopolymers exposed to carbon capture solvents, Adv. Appl. Ceram., (2011), 110(8), 446–452, DOI: 10.1179/1743676111Y.0000000048.
  • Escalante Garcia JI, Campos-Venegas K, Gorokhovsky A, et al.., Cementitious composites of pulverised fuel ash and blast furnace slag activated by sodium silicate: effect of Na2O concentration and modulus, Adv. Appl. Ceram., (2006), 105(4), 201–208, DOI: 10.1179/174367606X120151.
  • Guerrero Ana, Goñi Sara, Paz Lorenzo Mari, Antonio Ibañez José, Development of new cement-based matrices for the safe disposal of hazardous metals: cadmium and caesium, Advances in Applied Ceramics, 2013, 112(4), 190–196.
  • Jamal Khatib, Effect of fly ash-gypsum blend on porosity and pore size distribution of cement pastes, Advances in Applied Ceramics, 2013, 112(4), 197–201.
  • Maries Alan, Douglas Hills Colin, Carey Paula, Ostle Sarah-Jayne, Linked low-carbon manufacture of cement and precast concrete, Advances in Applied Ceramics, 2013, 112(4), 202–206.
  • Li Qiu, Coleman NicholaJ., Early hydration of white Portland cement in the presence of bismuth oxide, Advances in Applied Ceramics, 2013, 112(4), 207–212.
  • Whittaker M, Dubina E, Al-Mutawa F, Arkless L, Plank J, Black L (2013) The effect of prehydration on the engineering properties of CEM I Portland cement. Advances in Cement Research 25(1), 12–20, http://dx.doi.org/10.1680/adcr.12.00030.
  • Justnes H (2013) Aspects of replacing gypsum with other calcium salts in Portland cement. Advances in Cement Research 25(1), 44–50, http://dx.doi.org/10.1680/adcr.12.00033.
  • Backus J, McPolin D, Basheer M, Long A, Holmes N (2013) Exposure of mortars to cyclic chloride ingress and carbonation. Advances in Cement Research 25(1), 3–11, http://dx.doi.org/10.1680/adcr.12.00029.
  • Young AJ, Warwick P, Milodowski AE, Read D (2013), Behaviour of radionuclides in the presence of superplasticiser. Advances in Cement Research 25(1), 32–43, http://dx.doi.org/10.1680/adcr.12.00032.
  • Pontikes Y, Kriskova L, Cizer O, Jones PT, Blanplain B (2013), On a new hydraulic binder from stainless steel converter slag. Advances in Cement Research 25(1), 21–31, http://dx.doi.org/10.1680/adcr.12.00031.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.