Publication Cover
Advances in Applied Ceramics
Structural, Functional and Bioceramics
Volume 110, 2011 - Issue 4: Cement and Concrete Research
594
Views
50
CrossRef citations to date
0
Altmetric
2010 DAVIDGE AWARD REVIEW

Fabrication and properties of ceramic 1D nanostructures from preceramic polymers: a review

Pages 188-204 | Received 16 Nov 2010, Accepted 09 Feb 2011, Published online: 22 Nov 2013

References

  • Rahaman MN: ‘Ceramic processing and sintering’, 770; 1995, New York, Dekker M.
  • Bill J, Aldinger F: ‘Precursor-derived covalent ceramics’, Adv. Mater., 1995, 7, (9), 775–787.
  • Riedel R, Ionescu E, Chen I.-W:‘Modern trends in advanced ceramics’, in ‘Ceramics science and technology’ Vol. 1, ‘Structures’(, Riedel R, ed), et al., 3–38; 2008, Weinheim, Wiley-VCH Verlag GmbH & Co. KGaA.
  • Schulz M: ‘Polymer derived ceramics in MEMS/NEMS – a review on production processes and application’, Adv. Appl. Ceram., 2009, 108, (8), 454–460.
  • Ziegler G, Kleebe HJ, Motz G, Müller H, Traβl S, Weibelzahl W: ‘Synthesis, microstructure and properties of SiCN ceramics prepared from tailored polymers’, Mater. Chem. Phys., 1999, 61, (1), 55–63.
  • Colombo P, Mera G, Riedel R, Soraru GD: ‘Polymer-derived ceramics: 40 years of research and innovation in advanced ceramics’, J. Am. Ceram. Soc., 2010, 93, (7), 1805–1837.
  • Colombo P, Hellmann J: ‘Ceramic foams from preceramic polymers’, Mater. Res. Innovations, 2002, 6, (5), 260–272.
  • Pivin JC, Colombo P, Soraru GD: ‘Comparison of ion irradiation effects in silicon-based preceramic thin films’, J. Am. Ceram. Soc., 2000, 83, (4), 713–720.
  • Monthioux M, Delverdier O: ‘Thermal behavior of (organosilicon) polymer-derived ceramics. V: main facts and trends’, J. Eur. Ceram. Soc., 1996, 16, (7), 721–737.
  • Danko GA, Silberglitt R, Colombo P, Pippel E, Woltersdorf J: ‘Comparison of microwave hybrid and conventional heating of preceramic polymers to form silicon carbide and silicon oxycarbide ceramics’, J. Am. Ceram. Soc., 2000, 83, (7), 1617–1625.
  • Colombo P, Martucci A, Fogato O, Villoresi P: ‘Silicon carbide films by laser pyrolysis of polycarbosilane’, J. Am. Ceram. Soc., 2001, 84, (1), 224–226.
  • Terauds K, Jimenez-Sanchez PE, Raj R, Vakifahmetoglu C, Colombo P: ‘Giant piezoresistivity of polymer-derived ceramics at high temperatures’, J. Eur. Ceram. Soc., 2010, 30, (11), 2203–2207.
  • Blum YD, Schwartz KB, Laine RM: ‘Preceramic polymer pyrolysis’, J. Mater. Sci., 1989, 24, (5), 1707–1718.
  • Colombo P, Soraru GD, Riedel R, Kleebe (eds.) HJ: ‘Polymer derived ceramics. from nano-structure to applications’, 489; 2009, Lancaster, PA, DESTech Publications.
  • Vakifahmetoglu C, Pippel E, Woltersdorf J, Colombo P: ‘Growth of 1D-nanostructures in porous polymer derived ceramics by catalyst-assisted-pyrolysis. Part I: iron catalyst’, J. Am. Ceram. Soc., 2010, 93, (4), 959–968.
  • Xia Y, Yang P, Sun Y, Wu Y, Mayers B, Gates B, Yin Y, Kim F, Yan H: ‘One-dimensional nanostructures: synthesis, characterization, and applications’, Adv. Mater., 2003, 15, (5), 353–389.
  • Li D, McCann JT, Xia Y, Marquez M: ‘Electrospinning: a simple and versatile technique for producing ceramic nanofibers and nanotubes’, J. Am. Ceram. Soc., 2006, 89, (6), 1861–1869.
  • Martin CR: ‘Membrane-based synthesis of nanomaterials’, Chem. Mater., 1996, 8, (8), 1739–1746.
  • Wan C, Guo G, Zhang Q: ‘SiOC ceramic nanotubes of ultrahigh surface area’, Mater. Lett., 2008, 62, (17–18), 2776–2778.
  • Cheng Q.-M, Interrante LV, Lienhard M, Shen Q, Wu Z: ‘Methylene-bridged carbosilanes and polycarbosilanes as precursors to silicon carbide–from ceramic composites to SiC nanomaterials’, J. Eur. Ceram. Soc., 2005, 25, (2–3), 233–241.
  • Yen H.-M, Jou S, Chu C.-J: ‘Si-O-C nanotubes from pyrolyzing polycarbosilane in a mesoporous template’, Mater. Sci. Eng. B, 2005, B122, (3), 240–245.
  • Cai KF, Lei Q, Zhang LC: ‘Ultra long SiC/SiO2 core-shell nanocables from organic precursor’, J. Nanosci. Nanotechnol., 2005, 5, (11), 1925–1928.
  • Cai KF, Zhang AX, Yin JL: ‘Ultra thin and ultra long SiC/SiO2 nanocables from catalytic pyrolysis of poly(dimethyl siloxane)’,Nanotechnology, 2007, 18, (48), 485601–485606.
  • Li F, Wen G, Song L: ‘Growth of nanowires from annealing SiBONC nanopowders’, J. Cryst. Growth, 2006, 290, (2), 466–472.
  • Cai KF, Lei Q, Zhang AX: ‘A simple route to ultra long SiC nanowires’, J. Nanosci. Nanotechnol., 2007, 7, 580–583.
  • Li G.-Y, Li X.-D, Wang H, Li Z.-Q: ‘Long silicon nitride nanowires synthesized in a simple route’, Appl. Phys. A: Mater. Sci. Process., 2008, 93A, (2), 471–475.
  • Scheffler M, Pippel E, Woltersdorf J, Greil P: ‘In situ formation of SiC-Si2ON2 micro-composite materials from preceramic polymers’, Mater. Chem. Phys., 2003, 80, (2), 565–572.
  • Jayaseelan DD, Lee WE, Amutharani D, Zhang S, Yoshida K, Kita H: ‘In situ formation of silicon carbide nanofibers on cordierite substrates’, J. Am. Ceram. Soc., 2007, 90, (5), 1603–1606.
  • Eick B, Youngblood J: ‘SiC nanofibers by pyrolysis of electrospun preceramic polymers’, J. Mater. Sci., 2009, 44, (1), 160–165.
  • Rao CNR, Deepak FL, Gundiah G, Govindaraj A: ‘Inorganic nanowires’, Prog. Solid State Chem., 2003, 31, (1–2), 5–147.
  • Li D, Xia Y: ‘Electrospinning of nanofibers: reinventing the wheel?’, Adv. Mater., 2004, 16, (14), 1151–1170.
  • Hulteen JC, Martin CR: ‘A general template-based method for the preparation of nanomaterials’, J. Mater. Chem., 1997, 7, (7), 1075–1087.
  • Lu X, Wang C, Wei Y: ‘One-dimensional composite nanomaterials: synthesis by electrospinning and their applications’, Small, 2009, 5, (21), 2349–2370.
  • Huczko A: ‘Template-based synthesis of nanomaterials’, Appl. Phys. A: Mater. Sci. Process., 2000, 70A, (4), 365–376.
  • Peuckert M, Vaahs T, Bruck M: ‘Ceramics from organometallic polymers’, Adv. Mater., 1990, 2, (9), 398–404.
  • Birot M, Pillot J.-P, Dunogues J: ‘Comprehensive chemistry of polycarbosilanes, polysilazanes, and polycarbosilazanes as precursors of ceramics’, Chem. Rev., 1995, 95, (5), 1443–1477.
  • Riedel R, Mera G, Hauser R, Klonczynski A: ‘Silicon-based polymer-derived ceramics: synthesis properties and applications-a review’, J. Ceram. Soc. Jpn, 2006, 114, (1330), 425–444.
  • Yajima S, Okamura K, Hayashi J, Omori M: ‘Synthesis of continuous SiC fibers with high tensile strength’, J. Am. Ceram. Soc., 1976, 59, (7–8), 324–327.
  • Li H, Zhang L, Cheng L, Wang Y, Yu Z, Huang M, Tu H, Xia H: ‘Effect of the polycarbosilane structure on its final ceramic yield’, J. Eur. Ceram. Soc., 2008, 28, (4), 887–891.
  • Blum YD, Schwartz KB, Laine RM: ‘Preceramic polymer pyrolysis. Part 1: pyrolytic properties of polysilazanes’, J. Mater. Sci., 1989, 24, (5), 1707–1718.
  • Bahloul D, Pereira M, Goursat P: ‘Preparation of silicon carbonitrides from an organosilicon polymer: II, thermal behavior at high temperatures under argon’, J. Am. Ceram. Soc., 1993, 76, (5), 1163–1168.
  • Bahloul D, Pereira M, Goursat P, Choong Kwet Yive N, Corriu R: ‘Preparation of silicon carbonitrides from an organosilicon polymer: I, thermal decomposition of the cross-linked polysilazane’, J. Am. Ceram. Soc., 1993, 76, (5), 1156–1162.
  • Vakifahmetoglu C, Menapace I, Hirsch A, Biasetto L, Hauser R, Riedel R, Colombo P: ‘Highly porous macro- and micro-cellular ceramics from a polysilazane precursor’, Ceram. Int., 2009, 35, (8), 3281–3290.
  • Abe Y, Gunji T: ‘Oligo- and polysiloxanes’, Prog. Polym. Sci., 2004, 29, (3), 149–182.
  • Seyferth D: ‘Birth, death and transfiguration: the synthesis of preceramic polymers, their pyrolysis and their conversion to ceramics’, Proc. 2nd Eur. Ceram. Soc. Conf., 567–599; 1991, Köln, Deutsche Keramische Gesellschaft.
  • Vakifahmetoglu C, Pauletti A, Fernandez Martin C, Babonneau F, Colombo P: ‘SiOC ceramic monoliths with hierarchical porosity’, Int.J. Appl. Ceram. Technol., 2010, 7, (4), 528–535.
  • Vakifahmetoglu C, Colombo P: ‘A direct method for the fabrication of macro-porous SiOC ceramics from preceramic polymers’, Adv.Eng. Mater., 2008, 10, (3), 256–259.
  • Otoishi S, Tange Y: ‘Effect of a catalyst on the formation of SiC whiskers from polycarbosilane. nickel ferrite as a catalyst’, Bull. Chem. Soc. Jpn, 1999, 72, (7), 1607–1613.
  • Zheng J, Kramer MJ, Akinc M: ‘In situ growth of SiC whisker in pyrolyzed monolithic mixture of AHPCS and SiC’, J. Am. Ceram. Soc., 2000, 83, (12), 2961–2966.
  • Zhou W, Zhang Y, Niu X, Min G: ‘One-dimensional sic nanostructures: synthesis and properties’, in ‘One-dimensional nanostructures, lecture notes in nanoscale science and technology’, (ed. , Wang Z M, ed), 17–59; 2008, London, Springer.
  • Otoishi S, Tange Y: ‘Growth rate and morphology of silicon carbide whiskers from polycarbosilane’, J. Cryst. Growth, 1999, 200, (3–4), 467–471.
  • Wagner RS, Ellis WC: ‘Vapor-liquid-solid mechanism of single crystal growth’, Appl. Phys. Lett., 1964, 4, (5), 89–90.
  • Jou S, Hsu CK: ‘Preparation of carbon nanotubes from vacuum pyrolysis of polycarbosilane’, Mater. Sci. Eng. B, 2004, B106, (3), 275–281.
  • Zhu S, Xi H.-A, Li Q, Wang R: ‘In situ growth of β-SiC nanowires in porous SiC ceramics’, J. Am. Ceram. Soc., 2005, 88, (9), 2619–2621.
  • Yao X, Tan S, Huang Z, Dong S, Jiang D: ‘Growth mechanism of β-SiC nanowires in SiC reticulated porous ceramics’, Ceram. Int., 2007, 33, (6), 901–904.
  • Yoon B.-H, Park C.-S, Kim H.-E, Koh Y.-H: ‘In situ synthesis of porous silicon carbide (SiC) ceramics decorated with SiC nanowires’, J. Am. Ceram. Soc., 2007, 90, (12), 3759–3766.
  • Li G.-Y, Li X.-D, Wang H, Liu L: ‘Long SiC nanowires synthesized from off-gases of the polycarbosilane-derived SiC preparation’, Appl. Phys. A: Mater. Sci. Process., 2010, 98A, (2), 293–298.
  • Mishra R, Tiwari R, Saxena A: ‘Synthesis of Fe–SiC nanowires via Precursor Route’ J. Inorg. Organomet. Polym. Mater., 2009, 19, (2), 223–227.
  • Yang W, Miao H, Xie Z, Zhang L, An L: ‘Synthesis of silicon carbide nanorods by catalyst-assisted pyrolysis of polymeric precursor’, Chem. Phys. Lett., 2004, 383, (5–6), 441–444.
  • Wang H, Xie Z, Yang W, Fang J, An L: ‘Morphology Control in the Vapor-Liquid-Solid Growth of SiC Nanowires’, Cryst. Growth Des., 2008, 8, (11), 3893–3896.
  • Lucke J, Hacker J, Suttor D, Ziegler G: ‘Synthesis and characterization of silazane-based polymers as precursors for ceramic matrix composites’, Appl. Organomet. Chem., 1997, 11, (2), 181–194.
  • Yang W, Xie Z, Li J, Miao H, Zhang L, An L: ‘Growth of platelike and branched single-crystalline Si3N4 whiskers’, Solid State Commun., 2004, 132, (3–4), 263–268.
  • Yang W, Xie Z, Miao H, Zhang L, Ji H, An L: ‘Synthesis of single-crystalline silicon nitride nanobelts via catalyst-assisted pyrolysis of a polysilazane’, J. Am. Ceram. Soc., 2005, 88, (2), 466–469.
  • Zhang L, Jin H, Yang W, Xie Z, Miao H, An L: ‘Optical properties of single-crystalline α-Si3N4 nanobelts’, Appl. Phys. Lett., 2005, 86, (6), 061908, 061903.
  • Yang W, Xie Z, Li J, Miao H, Zhang L, An L: ‘Ultra-long single-crystalline α-Si3N4 nanowires: derived from a polymeric precursor’, J. Am. Ceram. Soc., 2005, 88, (6), 1647–1650.
  • Yang W, Gao F, Wang H, Zheng X, Xie Z, An L: ‘Synthesis of ceramic nanocomposite powders with in situ formation of nanowires/nanobelts’, J. Am. Ceram. Soc., 2008, 91, (4), 1312–1315.
  • Yang W, Gao F, Wang H, Xie Z, An L: ‘Asymmetric silicon nitride nanodendrites’, Cryst. Growth Des., 2008, 8, (8), 2606–2608.
  • Gao F, Yang W, Fan Y, An L: ‘Aligned ultra-long single-crystalline α-Si3N4 nanowires’, Nanotechnology, 2008, 19, (10), 105602–10560.
  • Yang W, Cheng X, Wang H, Xie Z, Xing F, An L: ‘Bundled silicon nitride nanorings’, Cryst. Growth Des., 2008, 8, (11), 3921–3923.
  • Yang W, Wang H, Liu S, Xie Z, An L: ‘Controlled Al-doped single-crystalline silicon nitride nanowires synthesized via pyrolysis of polymer precursors’, J. Phys. Chem. B, 2007, 111B, (16), 4156–4160.
  • Gao F, Wang Y, Zhang L, Yang W, An L: ‘Optical properties of heavily Al-doped single-crystal Si3N4 nanobelts’, J. Am. Ceram. Soc., 2010, 93, (5), 1364–1367.
  • Gao F, Yang W, Fan Y, An L: ‘Mass production of very thin single-crystal silicon nitride nanobelts’, J. Solid State Chem., 2008, 181, (1), 211–215.
  • Gao F, Yang W, Wang H, Fan Y, Xie Z, An L: ‘Controlled Al-doped single-crystalline 6H-SiC nanowires’, Cryst. Growth Des., 2008, 8, (5), 1461–1464.
  • Cai KF, Huang LY, Zhang AX, Yin JL, Liu H: ‘Ultra long SiCN nanowires and SiCN/SiO2 nanocables: synthesis, characterization, and electrical property’, J. Nanosci. Nanotechnol., 2008, 8, 6338–6343.
  • Zhu N, Peng Z, Wang C, Fu Z, Miao H: ‘Preparation and characterization of bundled one-dimensional Si3N4 single-crystalline nanowires by catalytic pyrolysis of a polymer precursor’, Solid State Sci., 2009, 11, (6), 1094–1097.
  • Vakifahmetoglu C, Colombo P: ‘Porous polymer derived ceramics decorated with in-situ grown nano-structures’, Ceram. Trans., 2010, 213, 95–103.
  • Peng Z, Zhu N, Fu X, Wang C, Fu Z, Qi L, Miao H: ‘Growth and mechanism of network-like branched Si3N4 nanostructures’, J. Am. Ceram. Soc., 2010, 93, (8), 2264–2267.
  • Peng Z, Fu X, Zhu N, Guo X, Wang C, Fu Z: ‘Preparation and growth mechanism of clustered one-dimensional SiOx amorphous nanowires by catalytic pyrolysis of a polymer precursor’, J. Non-Cryst. Solids, 2009, 355, (43–44), 2156–2159.
  • Aharonovich I, Lifshitz Y, Tamir S: ‘Growth mechanisms of amorphous SiOx nanowires’ Appl. Phys. Lett., 2007, 90, (26), 263109–26310.
  • Haberecht J, Krumeich F, Stalder M, Nesper R: ‘Carbon nanostructures on high-temperature ceramics – a novel composite material and its functionalization’, Catal. Today, 2005, 102–103, 40–44.
  • Fan Y, Wang Y, Lou J, Xu S, Zhang L, An L, Heinrich H: ‘Formation of silicon-doped boron nitride bamboo structures via pyrolysis of a polymeric precursor’, J. Am. Ceram. Soc., 2006, 89, (2), 740–742.
  • Scheffler M, Greil P, Berger A, Pippel E, Woltersdorf J: ‘Nickel-catalyzed in situ formation of carbon nanotubes and turbostratic carbon in polymer-derived ceramics’, Mater. Chem. Phys., 2004, 84, (1), 131–139.
  • Berger A, Pippel E, Woltersdorf J, Scheffler M, Cromme P, Greil P: ‘Nanoprocesses in polymer-derived Si-O-C ceramics: electronmicroscopic observations and reaction kinetics’, Phys. Status Solidi A, 2005, 202A, (12), 2277–2286.
  • Segatelli MG, Radovanovic E, Gonçalves Mdo C, Yoshida IVP: ‘Investigation of the morphological changes promoted by heating of Si-C-O ceramics derived from a phenyl-rich hybrid polymer. Effect of Ni in the polymeric precursor’, J. Eur. Ceram. Soc., 2009, 29, (15), 3279–3287.
  • Vakifahmetoglu C, Carturan S, Pippel E, Woltersdorf J, Colombo P: ‘Growth of 1D-nanostructures in porous polymer derived ceramics by catalyst-assisted-pyrolysis. Part II: cobalt catalyst’, J. Am. Ceram. Soc., 2010, 93, (11), 3709–3719.
  • Colombo P, Vakifahmetoglu C, Costacurta S: ‘Fabrication of ceramic components with hierarchical porosity’, J. Mater. Sci., 2010, 45, (20), 5425–5455.
  • Bae C, Yoo H, Kim S, Lee K, Kim J, Sung MM, Shin H: ‘Template-directed synthesis of oxide nanotubes: fabrication, characterization, and applications’, Chem. Mater., 2008, 20, (3), 756–767.
  • Bechelany M, Bernard S, Brioude A, Cornu D, Stadelmann P, Charcosset C, Fiaty K, Miele P: ‘Synthesis of boron nitride nanotubes by a template-assisted polymer thermolysis process’, J. Phys. Chem. C, 2007, 111C, (36), 13378–13384.
  • Forsthoefel KM, Pender MJ, Sneddon LG: ‘Chemical precursor routes to nanostructured non-oxide ceramics’, ‘Functional nanostructured materials through multiscale assembly and novel patterning techniques’, MRS Proc., 2002, 728, 59–64.
  • Wang H, Li X.-D, Kim T.-S, Kim D.-P: ‘Inorganic polymer-derived tubular SiC arrays from sacrificial alumina templates’, Appl. Phys. Lett., 2005, 86, (17), 173103–173104.
  • Elyassi B, Kim TW, Sahimi M, Tsotsis TT: ‘Effect of polystyrene on the morphology and physical properties of silicon carbide nanofibers’, Mater. Chem. Phys., 2009, 118, (1), 259–263.
  • Pashchanka M, Engstler J, Schneider JJ, Siozios V, Fasel C, Hauser R, Kinski I, Riedel R, Lauterbach S, Kleebe H.-J, Flege S, Ensinger W: ‘Polymer-derived SiOC nanotubes and nanorods via a template approach’, Eur. J. Inorg. Chem., 2009, 2009, (23), 3496–3506.
  • Sarkar S, Chunder A, Fei W, An L, Zhai L: ‘Superhydrophobic mats of polymer-derived ceramic fibers’, J. Am. Ceram. Soc., 2008, 91, (8), 2751–2755.
  • Guron MM, Wei X, Welna D, Krogman N, Kim MJ, Allcock H, Sneddon LG: ‘Preceramic polymer blends as precursors for boron-carbide/silicon-carbide composite ceramics and ceramic fibers’, Chem. Mater., 2009, 21, (8), 1708–1715.
  • Ahmad Z, Nangrejo M, Edirisinghe M, Stride E, Colombo P, Zhang H: ‘Engineering a material for biomedical applications with electric field assisted processing’, Appl. Phys. A: Mater. Sci. Process., 2009, 97A, (1), 31–37.
  • Shin D.-G, Riu D.-H, Kim H.-E: ‘Web-type silicon carbide fibers prepared by the electrospinning of polycarbosilanes’, J. Ceram. Process. Res., 2008, 9, (2), 209–214.
  • Lu P, Huang Q, Mukherjee A, Hsieh Y.-L: ‘Synthesis of nickel nanoparticles supported on nanoporous silicon oxycarbide (SiCO) sheath core fibers’, J. Phys. Chem. C, 2010, 114C, (27), 11776–11782.
  • Lu P, Huang Q, Liu B, Bando Y, Hsieh Y.-L, Mukherjee AK: ‘Macroporous silicon oxycarbide fibers with luffa-like superhydrophobic shells’, J. Am. Chem. Soc., 2009, 131, (30), 10346–10347.
  • Sarkar S, Zou J, Liu J, Xu C, An L, Zhai L: ‘Polymer-derived ceramic composite fibers with aligned pristine multiwalled carbon nanotubes’, ACS Appl. Mater. Interfaces, 2010, 2, (4), 1150–1156.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.