References
- Morales AM, Pitchumani R, Garino TJ, Gutmann AK, Domeier LA: ‘Fabrication of ceramic microstructures via microcasting of nanoparticulate slurry’, J. Am. Ceram. Soc., 2005, 88, 570–578.
- Mawardi A, Pitchumani R: ‘Simulation of sintering of nanoparticulate micropreforms in a microfabrication process’, Acta Mater., 2009, 57, (6), 1975–1987.
- Shewmon PG: ‘The movement of small inclusions in solids by a temperature gradient’, Trans. Metall. Soc. AIME, 1964, 230, 1134.
- Hillert M: ‘On the theory of normal and abnormal grain growth’, Acta Metall. Mater., 1965, 13, 227–238.
- Brook RJ: ‘Pore-grain boundary interactions and grain growth’, J. Am. Ceram. Soc., 1969, 52, 56–57.
- Ashby MF: ‘Sintering and isostatic pressing diagrams’; 1990, Cambridge, University of Cambridge Press.
- Du ZZ, Cocks ACF: ‘Constitutive models for the sintering of ceramic components—I. material models’, Acta Metall. Mater., 1992, 40, 1969–1979.
- Du ZZ, Cocks ACF: ‘Sintering of fine-grained materials by interface reaction controlled grain boundary diffusion’, Int. J. Solids Struct., 1994, 31, (10), 1429–1445.
- Cocks ACF: ‘The structure of constitutive laws for the sintering of fine grained materials’, Acta Metall. Mater., 1994, 42, 2191–2210.
- Svoboda J, Riedel H, Zipse H: ‘Equilibrium pore surfaces, sintering stresses and constitutive equations for the intermediate and late stages of sintering—I. computation of equilibrium surfaces’, Acta Metall. Mater., 1994, 42, 435–443.
- Riedel H, Zipse H, Svoboda J: ‘Equilibrium pore surfaces, sintering stresses and constitutive equations for the intermediate and late stages of sintering—II. diffusional densification and creep’, Acta Metall. Mater., 1994, 42, 445–452.
- Harmer MP, Brook RJ: ‘Fast firing microstructural benefits’, J. Br. Ceram. Soc., 1981, 80, 147–148.
- Cameron CP, Raj R: ‘Grain-growth transition during sintering of colloidally prepared alumina powder compacts’, J. Am. Ceram. Soc., 1988, 71, 1031–1035.
- Yeh TS, Sacks MD: ‘Effect of green microstructure on sintering of alumina’, in ‘Ceramic transactions’, Vol. 7, ‘Sintering of advanced ceramics’; 309–331, Westerville, OH, The American Ceramic Society.
- Chen IW, Wang XH: ‘sintering dense nanocrystalline ceramics without final-stage grain growth’, Nature, 2000, 404, 168–171.
- Mazaheri M, Simchi A, Golestani-Fard F: ‘Densification and grain growth of nanocrystalline 3Y-TZP during two-step sintering’, J. Eur. Ceram. Soc., 2008, 28, 2933–2939.
- Brook RJ: ‘Fabrication principles for the production of ceramics with superior mechanical properties’, Proc. Br. Ceram. Soc., 1982, 32, 7–24.
- Wang Y, Lu B, Sun X, Sun T, Xu H: ‘Synthesis of nanocrystalline Sc2O3 powder and fabrication of transparent Sc2O3 ceramics’, Adv. Appl. Ceram., 2011, 110, 95–98.
- Fu RL, Agathopoulos S: ‘Nanostructure and bimodal structure of Si3N4 ceramics developed by spark plasma sintering method’, Adv. Appl. Ceram., 2009, 108, 358–362.
- Ragulya AV: ‘Consolidation of ceramic nanopowders’, Adv. Appl. Ceram., 2008, 107, 118–134.
- Kingery WD, Bowen HK, Uhlmann DR: ‘Introduction to ceramics’; 1975, New York, Wiley.
- Ashby MF: ‘On interface-reaction control of Nabarro-Herring creep and sintering’, Scr. Metall. Mater., 1969, 3, 837.
- Coble RL: ‘Sintering crystalline solids. II. experimental test of diffusion models in powder compacts’, J. Appl. Phys., 1961, 32, 793–799.
- Pan J, Cocks ACF: ‘A constitutive model for stage 2 sintering of fine grained materials-II. effects of an interface reaction’, Acta Metall. Mater., 1994, 42, 1223–1230.
- He Z, Ma J: ‘Constitutive modeling of alumina sintering: grain-size effect on dominant densification mechanism’, Comput. Mater. Sci., 2005, 32, 196–202.
- Lin FJT, de Jonghe LC, Rahaman MN: ‘Microstructural refinement of sintered alumina by a two-step sintering technique’, J. Am. Ceram. Soc., 1997, 80, 2269–2277.
- He Z, Ma J: ‘Densification and grain growth during interface reaction controlled sintering of alumina ceramics’, Ceram. Int., 2001, 27, 261–264.