Publication Cover
Advances in Applied Ceramics
Structural, Functional and Bioceramics
Volume 111, 2012 - Issue 3
121
Views
7
CrossRef citations to date
0
Altmetric
Original Article

Electrosynthesis and performances of cobalt–ceria nanocomposite biocoatings

, , &
Pages 134-141 | Received 08 Sep 2011, Accepted 31 Oct 2011, Published online: 22 Nov 2013

References

  • Hovestad A, Janssen LJJ: ‘Electroplating of metal matrix composites by codeposition of suspended particles’, Mod. Asp. Electrochem., 2005, 38, 475–532.
  • Cai C, Zhu XB, Zheng GQ, Yuan YN, Huang XQ, Cao FH, Yang JF, Zhang Z: ‘Electrodeposition and characterization of nano-structured Ni–SiC composite films’, Surf. Coat. Technol., 2011, 205, 3448–3454.
  • Benea L: ‘Electrodeposition and tribocorrosion behaviour of ZrO2–Ni composite coatings’, J. Appl. Electrochem., 2009, 39, 1671–1681.
  • Ciubotariu AC, Benea L, Mitoseriu O, Wenger F, Ponthiaux P: ‘Influence of particles size on the morphology and corrosion behaviour of phenol–formaldehyde/Zn composite coatings obtained by electrodeposition’, J. Optoelectron. Adv. M, 2009, 11M, 892–897.
  • Benea L, Wenger F, Ponthiaux P, Celis JP: ‘Tribocorrosion behaviour of Ni–SiC nano-structured composite coatings obtained by electrodeposition’, Wear, 2009, 266, 398–405.
  • Ciubotariu AC, Benea L, Lakatos-Varsanyi M, Dragan V: ‘Electrochemical impedance spectroscopy and corrosion behaviour of Al2O3-Ni nano composite coatings’, Electrochim. Acta, 2008, 53, 4557–4563.
  • Bratu F, Benea L, Celis JP: ‘The influence of fretting parameters on tribocorrosion behaviour of AISI 304L stainless steel in Ringer solution’, Rev. Chim. Buchar., 2008, 59, 346–350.
  • Bratu F, Benea L, Celis JP: ‘Tribocorrosion behaviour of Ni–SiC composite coatings under lubricated conditions’, Surf. Coat. Technol., 2007, 201, 6940–6946.
  • Benea L, Bonora PL, Borello A, Martelli S: ‘Wear corrosion properties of nano-structured SiC–nickel composite coatings obtained by electroplating’, Wear, 2001, 249, 995–1003.
  • Benea L, Bonora PL, Borello A, Martelli S: ‘Effect of sic size dimensions on the corrosion wear resistance of the electrodeposited composite coating’, Mater. Corros., 2002, 53, 23–29.
  • Aruna ST, Grips VKW, Rajam KS: ‘Ni-based electrodeposited composite coating exhibiting improved microhardness, corrosion and wear resistance properties’, J. Alloys Compd, 2009, 468, 546–552.
  • Gyftou P, Pavlatou EA, Spyrellis N: ‘Effect of pulse electrodeposition parameters on the properties of Ni/nano-SiC composites’, Appl. Surf. Sci., 2008, 254, 5910–5916.
  • Thiemig D, Bund A: ‘Characterization of electrodeposited Ni–TiO2 nanocomposite coatings’, Surf. Coat. Technol., 2008, 202, 2976–2984.
  • Moller A, Hahn H: ‘Synthesis and characterization of nanocrystalline Ni/ZrO2 composite coatings’, Nanostruct. Mater., 1999, 12, 259–262.
  • Szczygiel B, Kolodziej M: ‘Composite Ni/Al2O3 coatings and their corrosion resistance’, Electrochim. Acta, 2005, 50, 4188–4195.
  • Sun XJ, Li JG: ‘Friction and wear properties of electrodeposited nickel–titania nanocomposite coatings’, Tribol. Lett., 2007, 28, 223–228.
  • Xue YJ, Li JS, Ma W, Zhou YW, Duan MD: ‘Sliding wear behaviors of electrodeposited nickel composite coatings containing micrometer and nanometer La2O3 particles’, J. Mater. Sci., 2006, 41, 1781–1784.
  • Qu NS, Zhu D, Chan KC: ‘Fabrication of Ni–CeO2 nanocomposite by electrodeposition’, Scr. Mater., 2006, 54, 1421–1425.
  • Srivastava M, Grips VKW, Rajam KS: ‘Electrodeposition of Ni–Co composites containing nano-CeO2 and their structure properties’, Appl. Surf. Sci., 2010, 257, 717–722.
  • Chandradass J, Bae DS: ‘Nano α-Al2O3-t-ZrO2 composite powders by calcining an emulsion precursor at 1100°C’, J. Alloys Compd, 2009, 469, L10–L12.
  • Kong YM, Kim HE, Kim HW: ‘Production of aluminum–zirconium oxide hybridized nanopowder and its nanocomposite’, J. Am. Ceram. Soc., 2007, 90, 298–302.
  • Gay PA, Limat JM, Steinmann PA, Pagetti J: ‘Characterisation and mechanical properties of electroless NiP–ZrO2 coatings’, Surf. Coat. Technol., 2007, 202, 1167–1171.
  • Mazuera D, Perales O, Suarez M, Singh S: ‘Synthesis, characterization and thermal analysis of polyimide–cobalt ferrite nanocomposites’, Mater. Sci. Eng. A, 2010, A257, 6393–6399.
  • Guo C, Zuo YYu, Zhao X, Zhao J, Xiong J: ‘Effects of surfactants on electrodeposition of nickel-carbon nanotubes composite coatings’, Surf. Coat. Technol., 2008, 202, 3385–3390.
  • Burzyńska L, Rudnik E, Koza J, Błaż L, Szymański W: ‘Electrodeposition and heat treatment of nickel/silicon carbide composites’, Surf. Coat. Technol., 2008, 202, 2545–2556.
  • Zhu Z, Zhu D, Qu N, Lei W: ‘Electrodeposition of bright nickel coating under perturbation of hard particles’, Mater. Des., 2007, 28, 1776–1779.
  • Singh VB, Pandey P: ‘Electrodeposition of nickel composites from water-diethanolamine bath’, Surf. Coat. Technol., 2006, 200, 4511–4514.
  • Pompei L, Magagnin L, Lecis N, Cavallotti PL: ‘Electrodeposition of nickel–BN composite coatings’, Electrochim. Acta, 2009, 54, 2571–2574.
  • Escobedo JC, Ortiz JC, Almanza JM, Cortes DA: ‘Hydroxyapatite coating on a cobalt base alloy by investment casting’, Scr. Mater., 2006, 54, 1611–1615.
  • Cockeram BV, Wilson WL: ‘The hardness, adhesion and wear resistance of coatings developed for cobalt-base alloys’, Surf. Coat. Technol., 2001, 139, 161–182.
  • Patel B, Inam F, Reece MJ, Edirisinghe M, Bonfield W, Huang J, Angadji A: ‘Mechanism of chromium oxide formation in cobalt–chromium–molybdenum (F75) alloys prepared using spark plasma sintering’, Adv. Eng. Mater., 2011, 13, 411–417.
  • Anselme K, Ploux L, Ponche A: ‘Cell/material interfaces: influence of surface chemistry and surface topography on cell adhesion’, J. Adhes. Sci. Technol., 2010, 24, (5), 831–852.
  • Lord MS, Foss M, Besenbacher F: ‘Influence of nanoscale surface topography on protein adsorption and cellular response’, Nano Today, 2010, 5, 66–78.
  • Rasekh M, Ahmad Z, Day R, Wickam A, Edirisinghe M: ‘Direct writing of polycaprolactone polymer for potential biomedical engineering applications’, Adv. Eng. Mater., 2011, 13, B296–B305.
  • Lekka M, Zendron G, Zanella C, Lanzutti A, Fedrizzi L, Bonora PL: ‘Corrosion properties of micro- and nanocomposite copper matrix coatings produced from a copper pyrophosphate bath under pulse current’, Surf. Coat. Technol., 2011, 205, 3438–3447.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.