References
- Dorey RA: ‘Piezo2009: Piezoelectrics for end users V’, Adv. Appl. Ceram., 2010, 109, (3), 129.
- Dorey RA, Whatmore RW: ‘Electroceramic thick film fabrication for MEMS’, J. Electroceram., 2004, 12, (1–2), 19–32.
- Dorey RA: ‘Ceramic thick films for MEMS and microdevices’; 2011, Amsterdam, Elsevier.
- Dorey RA, Stringfellow SB, Whatmore RW: ‘Effect of sintering aid and repeated sol infiltrations on the dielectric and piezoelectric properties of a PZT composite thick film’, J. Eur. Ceram. Soc., 2002, 22, 2921–2926.
- Badcock RA, Birt EA: ‘The use of 0–3 piezocomposite embedded Lamb wave sensors for detection of damage in advanced fibre composites’, Smart Mater. Struct., 2000, 9, (3), 291–297.
- Liu X, Xiong C, Sun H, Dong L, Li R, Liu Y: ‘Piezoelectric and dielectric properties of PZT/PVC and graphite doped with PZT/PVC composites’, Mater. Sci. Eng. B, 2006, B127, (2–3), 261–266.
- Hellier C: ‘Handbook of non-destructive evaluation’; 2001, New York, McGraw Hill.
- Dolinsek S, Kopac J, Viharos ZJ, Monostori L: ‘An intelligent AE sensor for the monitoring of finish machining process’, Proc. 2nd Int. Conf. on ‘Intelligent processing and manufacturing of materials’, Honolulu, HI, USA, July 1999, IEEE, Vol. 2, 847–853.
- Miller RK, McIntire P: ‘Non-destructive testing handbook’, 2nd edn, Vol. 5, ‘Acoustic emission testing’; 1987, Columbus, OH, American Society of Non-destructive Testing.
- Mba D, Rao RBKN: ‘Development of acoustic emission technology for condition monitoring and diagnosis of rotating machines: bearings, pumps, gearboxes, engines, and rotating structures’, Shock Vibr. Digest, 2006, 38, (1), 3–16.
- Drouillard TF: ‘Acoustic emissions – the first half century’, ‘Progress in acoustic emission VII’; 1994, Sapporo, The Japanese Society for NDI.
- Physical Acoustics Corporation: ‘Miniature sensors’, 2010. http://www.pacndt.com/index.aspx?go = products&focus = /sensors/miniature.htm
- ‘Standard guide for determining the reproducibility of acoustic emission sensor response’, ASTM E976-10, ASTM International, West Conshohocken, PA, USA, 2010.
- Sato K, Sato K, Hotta Y: ‘Rheological behaviour of ball-milled and wet-jet milled ZnO slurries with polyvinyl alcohol as an organic binder’, J. Ceram. Soc. Jpn, 2011, 119, (3), 203–207.
- Matei A, Cernica I, Cadar O, Roman C, Schiopu V: ‘Synthesis and characterisation of ZnO–polymer nanocomposites’, Int. J. Mater. Forum, 2008, 967–770.
- Bera A, Basak D: ‘Effect of surface capping with poly(vinyl alcohol) on the photocarrier relaxation of ZnO nanowires’, Appl. Mater. Interfaces, 2009, 1, 2066–2070.
- Liufu S, Xiao H, Li Y: ‘Investigation of PEG adsorption on the surface of zinc oxide nanoparticles’, Powder Technol., 2004, 145, 20–24.
- ‘Continuous monitoring of Acoustic Emission from metal pressure boundaries’, ASTM E1139-07, ASTM International, West Conshohocken, PA, USA, 2007.
- Dorey RA, Whatmore RW: ‘Apparent reduction in the value of the d33 piezoelectric coefficient in PZT thick films’, Integr. Ferroelectr., 2002, 50, 111–119.