References
- Aviles MA, Cordoba JM, Sayagues MJ, Gotor FJ: ‘Mechanochemical synthesis of Ti1−xZrxB2 and Ti1−xHfxB2 solid solutions’, Ceram. Int., 2011, 37, 1895–1904.
- Fahrenholtz WG, Hilmas GE: ‘Refractory diborides of zirconium and hafnium’, J. Am. Ceram. Soc., 2007, 90, 1347–1364.
- Sonber JK, Suri AK: ‘Synthesis and consolidation of zirconium diboride: review’, Adv. Appl. Ceram. 2011, 110, 321–334.
- Aviles MA, Cordoba JM, Sayagues MJ, Alcala MD, Gotor FJ: ‘Mechanosynthesis of Hf1−xZrxB2 solid solution and Hf1−xZrxB2/SiC composite powders’, J. Am. Ceram. Soc., 2010, 93, 696–702.
- Camurlu HE, Maglia F: ‘Preparation of nano-size ZrB2 powder by self-propagating high-temperature synthesis’, J. Eur. Ceram. Soc., 2009, 29, 1501–1506.
- Chamberlain AL, Fahrenholtz WG, Hilmas GE: ‘Reactive hot pressing of zirconium diboride’, J. Eur. Ceram. Soc., 2009, 29, 3401–3408.
- Peshev P, Bliznakov G: ‘On the borothermic preparation of titanium, zirconium and hafnium diborides’, J. Less Common Met., 1968, 14, 23–32.
- Ran S, Van der Biest O, Vleugels J: ‘ZrB2 powders synthesis by borothermal reduction’, J. Am. Ceram. Soc., 2010, 93, 1586–1590.
- Khanra AK, Pathak LC, Godkhindi MM: ‘Carbothermal synthesis of zirconium diboride (ZrB2) whiskers’, Adv. Appl. Ceram. 2007, 106, 155–160.
- Balc O, Agaogullar D, Duman I, Ovecoglu ML: ‘Carbothermal production of ZrB2–ZrO2 ceramic powders from ZrO2–B2O3/B system by high-energy ball milling and annealing assisted process’, Ceram. Int., 2012, 38, 2201–2207.
- Zhao H, He Y, Jin Z: ‘Preparation of zirconium boride powder’, J. Am. Ceram. Soc., 1995, 78, 2534–2536.
- Sonber JK, Murthy TSRCh, Subramanian C, Kumar S, Fotedar RK, Suri AK: ‘Investigations on synthesis of ZrB2 and development of new composites with HfB2 and TiSi2’, Int. J. Refract. Met. H., 2011, 29, 21–30.
- Guo WM, Zhang GJ: ‘Reaction processes and characterization of ZrB2 powder prepared by boro/carbothermal reduction of ZrO2 in vacuum’, J. Am. Ceram. Soc., 2009, 92, 264–267.
- Khanra AK, Pathak LC, Mishra SK, Godkhindi MM: ‘Sintering of ultrafine zirconium diboride powder prepared by modified SHS technique’, Adv. Appl. Ceram., 2005, 104, 282–284.
- Nishiyama K, Nakamur T, Utsumi S, Sakai H, Abe M: ‘Preparation of ultrafine boride powders by metallothermic reduction method’, J. Phys. Conf. Ser., 2009, 176, 012043.
- Setoudeh N, Welham NJ: ‘Formation of zirconium diboride (ZrB2) by room temperature mechanochemical reaction between ZrO2, B2O3 and Mg’, J. Alloy Compd., 2006, 420, 225–228.
- Mishra SK, Das S, Pathak LC: ‘Defect structures in zirconium diboride powder prepared by self-propagating high-temperature synthesis’, Mater. Sci. Eng., 2004, A364, 249–255.
- Mishra SK, Das SK, Sherbacov V: ‘Fabrication of Al2O3–ZrB2 in situ composite by SHS dynamic compaction: a novel approach’, Compos. Sci. Tech., 2007, 67, 2447–2453.
- Lee YB, Park HC, Oh KD, Bowen CR, Stevens R: ‘Self-propagating high-temperature synthesis of ZrB2 in the system ZrO2–B2O3–Fe2O3–Al’, J. Mater. Sci. Lett., 2000, 19, 469–471.
- Akgun B, Camurlu HE, Topkaya Y, Sevinc N: ‘Mechanochemical and volume combustion synthesis of ZrB2’, Int. J. Refract. Met. H., 2011, 29, 601–607.
- Takacs L: ‘Self-sustaining reactions induced by ball milling’, Progr. Mater. Sci., 2002, 47, 355–414.
- Gotor FJ, Achimovicova M, Real C, Balaz P: ‘Influence of the milling parameters on the mechanical work intensity in planetary mills’, Powder Tech., 2013, 233, 1–7.
- Sarkar S: ‘The removal of alumina and silica from iron rejects slime by chemical leaching’, Hydrometallurgy, 2011, 105, 364–369.
- Liu J, Ownby PD: ‘Enhanced mechanical properties of alumina by dispersed titanium diboride particulate inclusions’, J. Am. Ceram. Soc., 1991, 74, 241–243.