Two-step pulsed electric current sintering of transparent Al₂O₃ ceramics

References

• Rice R. W., Wu C. C. and Borchelt F.: ‘Hardness–grain-size relations in ceramics’, J. Am. Ceram. Soc., 1994, 77, 2539–2553.
   Web of Science ®Google Scholar
• Krell A. and Blank P.: ‘Grain size dependence of hardness in dense submicrometer alumina’, J. Am. Ceram. Soc., 1995, 78, 1118–1120.
   Web of Science ®Google Scholar
• Roy R. S., Guchhait H., Chanda A., Basu D. and Mitra M. K.: ‘Improved sliding wear-resistance of alumina with sub-micro grain size: a comparison with coarser grained material’, J. Eur. Ceram. Soc., 2007, 27, 4737–4743.
   Web of Science ®Google Scholar
• Senda T., Yasuda E., Kaji M. and Bradt R. C.: ‘Effect of grain size on the sliding wear and friction of alumina at elevated temperatures’, J. Am. Ceram. Soc., 1999, 82, 1505–1511.
   Web of Science ®Google Scholar
• O Y. T., Koo J., Hong K. J., Park J. S. and Shin D. C.: ‘Effect of grain size on transmittance and mechanical strength of sintered alumina’, Mater. Sci. Eng. A, 2004, A374, 191–195.
   Web of Science ®Google Scholar
• Jiang D., Hulbert D. M., Anselmi-Tamburini U., Ng T., Land D. and Mukherjee A. K.: ‘Optically transparent polycrystalline Al2O3 produced by spark plasma sintering’, J. Am. Ceram. Soc., 2008, 91, 151–154.
   Web of Science ®Google Scholar
• Suárez M., Fernández A., Menéndez J. L. and Torrecillas R.: ‘Grain growth control and transparency in spark plasma sintered self-doped alumina materials’, Scr. Mater., 2009, 61, 931–934.
   Web of Science ®Google Scholar
• Stuer M., Zhao Z., Aschauer U. and Bowen P.: ‘Transparent polycrystalline alumina using spark plasma sintering: effect of Mg, Y and La doping’, J. Eur. Ceram. Soc., 2010, 30, 1335–1343.
   Web of Science ®Google Scholar
• Kim B. N., Hiraga K., Morita K. and Yoshida H.: ‘Spark plasma sintering of transparent alumina’, Scr. Mater., 2007, 57, 607–610.
   Web of Science ®Google Scholar
• Kim B. N., Hiraga K., Morita K. and Yoshida H.: ‘Effects of heating rate on microstructure and transparency of spark plasma sintered alumina’, J. Eur. Ceram. Soc., 2009, 29, 323–327.
   Web of Science ®Google Scholar
• Kim B. N., Hiraga K., Morita K., Yoshida H., Miyazaki T. and Kagawa Y.: ‘Microstructure and optical properties of transparent alumina’, Acta. Mater., 2009, 57, 1319–1326.
   Web of Science ®Google Scholar
• Apetz R. and Bruggen M. P. B.: ‘Transparent alumina: a light-scattering model’, J. Am. Ceram. Soc., 2003, 86, 480–486.
   Web of Science ®Google Scholar
• Pecharromàn C., Mata-Osoro G., Antonio-Dìaz L., Torrecillas R. and Moya J. S.: ‘On the transparency of nanostructured alumina: Rayleigh–Gans model for anisotropic spheres’, Opt. Express, 2009, 17, 6899–6912.
   Web of Science ®Google Scholar
• Braun A., Falk G. and Clasen R.: ‘Transparent polycrystalline alumina ceramic with sub-micrometre microstructure by means of electrophoretic deposition’, Materialwiss. Werkstofftech., 2006, 37, 293–297.
   Web of Science ®Google Scholar
• Bernard-Granger G. and Guizard C.: ‘Influence of MgO or TiO2 doping on the sintering path and on the optical properties of a submicronic alumina material’, Scr. Mater., 2007, 56, 983–986.
   Web of Science ®Google Scholar
• Krell A., Blank P., Ma H., Hutzler T. and Nebelung M.: ‘Processing of high-density submicrometer Al2O3 for new applications’, J. Am. Ceram. Soc., 2003, 86, 546–553.
   Web of Science ®Google Scholar
• Peelen J. G. J.: ‘Light transmission of sintered alumina’, Philips Tech. Rev., 1976, 36, 47–52.
   Google Scholar
• Peelen J. G. J.: ‘Transparent hot-pressed alumina. I: hot pressing of alumina’, Ceramurgia Int., 1979, 5, 70–75.
   Google Scholar
• Peelen J. G. J.: ‘Transparent hot-pressed alumina. II: transparent versus translucent alumina’, Ceramurgia Int., 1979, 5, 115–119.
   Google Scholar
• Mizuta H., Oda K., Shibasaki Y., Maeda M., Machida M. and Ohshima K.: ‘Preparation of high-strength and translucent alumina by hot iso-static pressing’, J. Am. Ceram. Soc., 1992, 75, 469–473.
   Web of Science ®Google Scholar
• Lallemant L., Fantozzi G., Garnier V. and Bonnefont G.: ‘Transparent polycrystalline alumina obtained by SPS: green bodies processing effect’, J. Eur. Ceram. Soc., 2012, 32, 2909–2915.
   Web of Science ®Google Scholar
• Aman Y., Garnier V. and Djurado E.: ‘Influence of green state processes on the sintering behaviour and the subsequent optical properties of spark plasma sintered alumina’, J. Eur. Ceram. Soc., 2009, 29, 3363–3370.
   Web of Science ®Google Scholar
• Grasso S., Kim B. N., Hu C., Maizza G. and Sakka Y.: ‘Highly transparent pure alumina fabricated by high-pressure spark plasma sintering’, J. Am. Ceram. Soc., 2010, 93, 2460–2462.
   Web of Science ®Google Scholar
• Aman Y., Garnier V. and Djurado E.: ‘A screening design approach for the understanding of spark plasma sintering parameter: a case of translucent polycrystalline undoped alumina’, Int. J. Appl. Ceram. Technol., 2010, 7, 574–586.
   Web of Science ®Google Scholar
• Dobrovinskaya E. R., Lytvynov L. A. and Pishchik V.: ‘Sapphire: material, manufacturing, applications’, 1–42; 2009, New York, Springer.
   Google Scholar
• Roussel N., Lallemant L., Durand B., Guillemet S., Ching J. Y. C., Fantozzi G., Garnier V. and Bonnefont G.: ‘Effects of the nature of the doping salt and of the thermal pre-treatment and sintering temperature on spark plasma sintering of transparent alumina’, Ceram. Int., 2011, 37, 3565–3573.
   Web of Science ®Google Scholar
• Krell A., Blank P., Ma H. and Hutzler T.: ‘Transparent sintered corundum with high hardness and strength’, J. Am. Ceram. Soc., 2003, 86, 12–18.
   Web of Science ®Google Scholar
• Krell A. and Klimke J.: ‘Effects of the homogeneity of particle coordination on solid-state sintering of transparent alumina’, J. Am. Ceram. Soc., 2006, 89, 1985–1992.
   Web of Science ®Google Scholar
• Kim D. S., Lee J. H., Sung R. J., Kim S. W., Kim H. S. and Park J. S.: ‘Improvement of translucency in Al2O3 ceramics by two-step sintering technique’, J. Eur. Ceram. Soc., 2007, 27, 3629–3632.
   Web of Science ®Google Scholar
• Cheng J., Agarwal D., Zhang Y. and Roy R.: ‘Microwave sintering of transparent alumina’, Mater. Lett., 2002, 56, 587–592.
   Web of Science ®Google Scholar
• Kwon O. H., Nordahl C. S. and Messing G. L.: ‘Submicrometer transparent alumina by sinter forging seeded γ-alumina powders’, J. Am. Ceram. Soc., 1995, 78, 491–494.
   Web of Science ®Google Scholar
• Krell A., Klimke J., Hutzler T.: ‘Advanced spinel and sub-μm Al2O3 for transparent armour applications’, J. Eur. Ceram. Soc., 2009, 29, 275–281.
   Web of Science ®Google Scholar
• Coble R. L.: ‘Transparent alumina and method of preparation’, US patent no. 3026210, 20 March 1962.
   Google Scholar
• Peelen J. G. J. and Metselaar R.: ‘Light scattering by pores in polycrystalline materials: Transmission properties of alumina’, J. Appl. Phys., 1974, 45, 216–220.
   Web of Science ®Google Scholar
• Hayashi K., Kobayashi O., Toyoda S. and Morinaga K.: ‘Transmission optical properties of polycrystalline alumina with submicron grains’, Mater. Trans., 1991, 32, 1024–1029.
   Web of Science ®Google Scholar
• Lin F. J. T., De Jonghe L. C. and Rahaman M. N.: ‘Microstructure refinement of sintered alumina by a two-step sintering technique’, J. Am. Ceram. Soc., 1997, 80, 2269–2277.
   Web of Science ®Google Scholar
• Chen I. W. and Wang Z. H.: ‘Sintering dense nanocrystalline ceramics without final-stage grain growth’, Nature, 2002, 404, 168–171.
   Web of Science ®Google Scholar
• Wang C. J., Huang C. Y. and Wu Y. C.: ‘Two-step sintering of fine alumina-zirconia ceramics’, Ceram. Int., 2009, 35, 1467–1472.
   Web of Science ®Google Scholar
• An L., Ito A. and Goto T.: ‘Two-step pressure sintering of transparent lutetium oxide by spark plasma sintering’, J. Eur. Ceram. Soc., 2011, 31, 1597–1602.
   Web of Science ®Google Scholar
• Dang K. Q. and Nanko M.: ‘Transparent alumina prepared by two-step sintering in pulsed electric current sintering’, Proc. Powder Metall. World Cong. 2012, Yokohama, Japan, October 2012, 17B-S3-18, Organized By Jpn. Powder Metall. Association (JPMA) and Jpn. Soc. Powder Powder Metall. (JSPM). Edited by Prof. Hideshi MIURA (Kyusyu Univ.) and Prof. Akira KAWASAKI (Tohoku Univ.).
   Google Scholar
• Dang K. Q. and Nanko M.: ‘Effects of on/off pulse pattern on sintering alumina by a pulsed electric current sintering process’, J. Ceram. Process. Res., 2009, 10, s32–s38.
   Web of Science ®Google Scholar
• Mendelson I.: ‘Average grain size in polycrystalline ceramics’, J. Am. Ceram. Soc., 1969, 52, 443–446.
   Web of Science ®Google Scholar