Influence of passivation pretreatment in common acid and alkali on oxidation behaviour of Ti₃SiC₂ at 500°C

References

• M. W. Barsoum: ‘The MN+1AXN phases: A new class of solids; thermodynamically stable nanolaminates’, Prog. Solid State Chem., 2000, 28, 201. doi: 10.1016/S0079-6786(00)00006-6
   Web of Science ®Google Scholar
• P. Eklund, M. Beckers, U. Jansson, H. Ho¨ gberg and L. Hultman: ‘The Mn+1AXn phases: materials science and thin-film processing’, Thin Solid Films, 2010, 518, 1851–1878. doi: 10.1016/j.tsf.2009.07.184
   Web of Science ®Google Scholar
• H. B. Zhang, Y. W. Bao and Y. C. Zhou: ‘Current status in layered ternary carbide Ti3SiC2, a review’, J. Mater. Sci. Technol., 2009, 25, 1–38. doi: 10.1179/174328409X397247
   Web of Science ®Google Scholar
• G. H Liu and J. T. Li: ‘Effects of Si source and high gravity on combustion synthesis of Ti3SiC2 in air’, Adv. Appl. Ceram., 2012, 111, 208–213. doi: 10.1179/1743676111Y.0000000076
   Web of Science ®Google Scholar
• M W. Barsoum, T. El-Raghy and M. Radovic: ‘Ti3SiC2: a layered machinable ductile carbide’, Interceram, 2000, 49, 226–233.
   Google Scholar
• Q. D. Xiao and S. Wu: ‘Tribological behaviours of Ti3SiC2 under current carrying conditions’, Adv. Appl. Ceram., 2014, 113, 381–388. doi: 10.1179/1743676114Y.0000000193
   Web of Science ®Google Scholar
• J. R. Lu, Y. Zhou, Y. Zheng, H. Y. Li and S. B. Li: ‘Interface structure and wetting behaviour of Cu/Ti3SiC2 system’, Adv. Appl. Ceram., 2015, 114, 39–44. doi: 10.1179/1743676114Y.0000000185
   Web of Science ®Google Scholar
• M. W. Barsoum, T. El-Raghy and L. U. J. T. Ogbuji: ‘Oxidation of Ti3SiC2 in air’, J. Electrochem. Soc., 1997, 144, 2508–2516. doi: 10.1149/1.1837846
   Web of Science ®Google Scholar
• Z. M. Sun, Y. C. Zhou and M. S. Li: ‘Oxidation behaviour of Ti3SiC2-based ceramic at 900–13008 C in air’, Corros. Sci., 2001, 43, 1095–1109. doi: 10.1016/S0010-938X(00)00142-6
   Web of Science ®Google Scholar
• Z. M. Sun, Y. C. Zhou and M. S. Li: ‘High temperature oxidation behaviour of Ti3SiC2-based material in air’, Acta Mater., 2001, 49, 4347–4353. doi: 10.1016/S1359-6454(01)00247-6
   Web of Science ®Google Scholar
• C. Racault, F. Langlais and R. Naslain: ‘Solid-state synthesis and characterization of the ternary phase Ti3SiC2’, J. Mater. Sci., 1994, 29, 3384–3392. doi: 10.1007/BF00352037
   Web of Science ®Google Scholar
• H. B. Zhang, Y. C. Zhou, Y. W. Bao and J. Y. Wang: ‘Oxidation behavior of bulk Ti3SiC2 at intermediate temperatures in dry air’, J. Mater. Res., 2006, 21, 402–408. doi: 10.1557/jmr.2006.0046
   Web of Science ®Google Scholar
• G. M. Liu, M. S. Li, Y. C. Zhou and Y. M. Zhang: ‘Oxidation behavior of silicide coating on Ti3SiC2-based ceramic’, Mater. Res. Innovations, 2002, 6, 226–231. doi: 10.1007/s10019-002-0201-7
   Web of Science ®Google Scholar
• M. Li, G. Liu, Y. Zhang and Y. Zhou: ‘Influence of Al–La cocementation on the oxidation behavior of Ti3SiC2-based ceramic’, Oxid. Met., 2003, 60, 179–193. doi: 10.1023/A:1024677632382
   Web of Science ®Google Scholar
• M. W. Barsoum, L. H. Ho-Duc, M. Radovic and T. El-Raghy: ‘Long time oxidation study of Ti3SiC2, Ti3SiC2/SiC, and Ti3SiC2/ TiC composites in air’, J. Electrochem. Soc., 2003, 150, 166–B175. doi: 10.1149/1.1556035
   Web of Science ®Google Scholar
• J. F. Zhang, L. J. Wang, W. Jiang and L. D. Chen: ‘High temperature oxidation behavior and mechanism of Ti3SiC2–SiC nanocomposites in air’, Compos. Sci. Technol., 2008, 68, 1531–1538. doi: 10.1016/j.compscitech.2007.10.029
   Web of Science ®Google Scholar
• S. B. Li, G. M. Song and Y. Zhou: ‘A dense and fine-grained SiC/ Ti3Si(Al)C2 composite and its high-temperature oxidation behavior’, J. Eur. Ceram. Soc., 2012, 32, 3435–3444. doi: 10.1016/j.jeurceramsoc.2012.04.029
   Web of Science ®Google Scholar
• H. B. Zhang, Y. C. Zhou, Y. W. Bao and M. S. Li: ‘Improving the oxidation resistance of Ti3SiC2 by forming a Ti3Si0.9Al0.1C2 solid solution’, Acta Mater., 2004, 52, 3631–3637. doi: 10.1016/j.actamat.2004.04.015
   Web of Science ®Google Scholar
• V. D. Jovic, B. M. Jovic, S. Gupta, T. El-Raghy and M. W. Barsoum: ‘Corrosion behavior of select MAX phases in NaOH, HCl and H2SO4’, Corros. Sci., 2006, 48, 4274–4282. doi: 10.1016/j.corsci.2006.04.005
   Web of Science ®Google Scholar
• D. Li, Y. Liang, X. X. Liu and Y. C. Zhou: ‘Corrosion behavior of Ti3AlC2 in NaOH and H2SO4’, J. Eur. Ceram. Soc., 2010, 30, 3227–3234. doi: 10.1016/j.jeurceramsoc.2010.07.002
   Web of Science ®Google Scholar
• S. Hiromoto, A.-P. Tsai, M. Sumita and T. Hanawa: ‘Effect of chloride ion on the anodic polarization behavior of the Zr65Al7.5Ni10Cu17.5 amorphous alloy in phosphate buffered solution’, Corros. Sci., 2000, 42, 1651–1660. doi: 10.1016/S0010-938X(00)00022-6
   Web of Science ®Google Scholar
• J. Arbiol, J. Cerda`, G. Dezanneau, A. Cirera, F. Peiro´, A. Comet and J. R. Morante: ‘Effects of Nb doping on the TiO2anatase-to-rutile phase transition’, J. Appl. Phys., 2002, 92, 853. doi: 10.1063/1.1487915
   Web of Science ®Google Scholar
• D. A. H. Hanaor and C. C. Sorrell: ‘Review of the anatase to rutile phase transformation’, J. Mater. Sci., 2011, 46, 855. doi: 10.1007/s10853-010-5113-0
   Web of Science ®Google Scholar
• K. Okada, N. Yamamoto, Y. Kameshima and A. Yasumori: ‘Effect of silica additive on the anatase-to-rutile phase transition’, J. Am. Ceram. Soc., 2001, 84, 1591. doi: 10.1111/j.1151-2916.2001.tb00882.x
   Web of Science ®Google Scholar
• Z. L. Jiang, X. Dai and H. Middleton: ‘Effect of silicon on corrosion resistance of Ti–Si alloys’, Mater. Sci. Eng. B, 2011, 176, 79–86. doi: 10.1016/j.mseb.2010.09.006
   Web of Science ®Google Scholar
• Z. L. Jiang, X. Dai and H. Middleton: ‘Investigation on passivity of titanium under steady-state conditions in acidic solutions’, Mater. Chem. Phys., 2011, 126, 859–865. doi: 10.1016/j.matchemphys.2010.12.028
   Web of Science ®Google Scholar