Synthesis of fine and high purity Cr₂AlC powders by novel method

References

• M. W. Barsoum, D. Brodkin and T. El-Raghy: ‘Layered machinable ceramics for high temperature applications’, Scr. Mater., 1997, 36, (5), 1583–1590. doi: 10.1016/S1359-6462(97)00288-1
   Web of Science ®Google Scholar
• W. B. Tian, P. L. Wang, G. J. Zhang, Y. M. Kan and Y. X. Li: ‘Mechanical properties of Cr2AlC ceramics’, J. Am. Ceram. Soc., 2007, 90, (5), 1663–1666. doi: 10.1111/j.1551-2916.2007.01634.x
   Web of Science ®Google Scholar
• T. Ai, F. Wang, Y. Zhang, P. Jiang and X. Yuan: ‘Synthesis and mechanism of ternary carbideTi3AlC2 by in situ hot pressing process in TiC–Ti–Al system’, Adv. Appl. Ceram., 2013, 112, (7), 424–429. doi: 10.1179/1743676113Y.0000000104
   Web of Science ®Google Scholar
• Z. J. Lin, M. J. Zhuo, Y. C. Zhou, M. S. Li and J. Y. Wang: ‘Microstructural characterization of layered-ternary Ti2AlC’, Acta Mater., 2006, 54, (4), 1009–1015. doi: 10.1016/j.actamat.2005.10.028
   Web of Science ®Google Scholar
• W. B. Tian, P. L. Wang, G. J. Zhang, Y. M. Kan, Y. Li and D. Yan: ‘Synthesis and thermal and electrical properties of bulk Cr2AlC’, Scr. Mater., 2006, 54, (5), 841–846. doi: 10.1016/j.scriptamat.2005.11.009
   Web of Science ®Google Scholar
• C. L. Yeh and C. W. Kuo: ‘Effects of Al and Al4C3 contents on combustion synthesis of Cr2AlC from Cr2O3–Al–Al4C3 powder compacts’, J. Alloys Compd., 2011, 509, (3), 651–655. doi: 10.1016/j.jallcom.2010.09.169
   Web of Science ®Google Scholar
• W. B. Tian, Z. M. Sun, Y. L. Du and H. Hashimoto: ‘Synthesis reactions of Cr2AlC from Cr–Al4C3–C by pulse discharge sintering’, Mater. Lett., 2008, 62, (23), 3852–3855. doi: 10.1016/j.matlet.2008.05.001
   Web of Science ®Google Scholar
• S. B. Li, W. B. Yu, H. X. Zhai, et al., ‘Mechanical properties of low temperature synthesized dense and fine-grained Cr2AlC ceramics’, J. Eur. Ceram. Soc., 2011, 31, (1–2), 217–224. doi: 10.1016/j.jeurceramsoc.2010.08.014
   Web of Science ®Google Scholar
• W. B. Tian, P. L. Wang, G. J. Zhang, et al., ‘Effect of composition and processing on phase assembly and mechanical property of Cr2AlC ceramics’, Mater. Sci. Eng. A, 2007, A454–A455, (25), 132–138. doi: 10.1016/j.msea.2006.11.032
   Web of Science ®Google Scholar
• M. Oghbaei and O. Mirzaee: ‘Microwave versus conventional sintering: a review of fundamentals, advantages and applications’, J. Alloys Compd., 2010, 494, (1–2), 175–189. doi: 10.1016/j.jallcom.2010.01.068
   Web of Science ®Google Scholar
• W. B. Tian, P. L. Wang, Y. M. Kan and G. J. Zhang: ‘Cr2AlC powders prepared by molten salt method’, J. Alloys Compd., 2008, 461, L5–L10. doi: 10.1016/j.jallcom.2007.06.094
   Google Scholar
• B. B. Panigrahi, M. Chu, Y. Kim and S. Cho: ‘Reaction synthesis and pressureless sintering of Cr2AlC powder’, J. Am. Ceram. Soc., 2010, 93, (6), 1530–1533.
   Web of Science ®Google Scholar
• Q. Wang, C. F. Hu, Q. Huang, et al., ‘Synthesis of high-purity Ti3SiC2 by microwave sintering’, Int. J. Appl. Ceram. Technol., 2013, 1–8.
   Google Scholar
• W. B. Tian, P. L. Wang, G. J. Zhang, Y. M. Kan, Y. Li and D. Yan: ‘Synthesis and thermal and electrical properties of bulk Cr2AlC’, Scr. Mater., 2006, 54, (5), 841. doi: 10.1016/j.scriptamat.2005.11.009
   Web of Science ®Google Scholar
• Z. J. Lin, M. S. Li, J. Y. Wang and Y. C. Zhou: ‘High-temperature oxidation and hot corrosion of Cr2AlC’, Acta Mater., 2007, 55, (18), 6182–6191. doi: 10.1016/j.actamat.2007.07.024
   Web of Science ®Google Scholar
• W. L. E. Wong, S. Karthik and M. Gupta: ‘Development of high performance Mg–Al2O3 composites containing Al2O3 in submicron length scale using microwave assisted rapid sintering’, Mater. Sci. Technol., 2005, 21, (9), 1063–1070. doi: 10.1179/174328405X51758
   Web of Science ®Google Scholar
• H. -C. Oh, S. H. Lee and S. C. Choi: ‘The reaction mechanism for the low temperature synthesis of Cr2AlC under electronic field’, J. Alloys Compd., 2014, 587, 296–302. doi: 10.1016/j.jallcom.2013.10.152
   Web of Science ®Google Scholar
• J. Rodseth, B. Rasch, O. Lund and J. Thonstad: ‘Solubility of carbon in aluminium and its effect upon the casting process’, Light Met., 2002, 883–888.
   Google Scholar
• R. P. Agarwala, S. P. Murarka and M. S. Anand: ‘Diffusion of chromium in aluminium’, Acta Met., 1964, 12, (5), 871–874. doi: 10.1016/0001-6160(64)90145-2
   Google Scholar
• P. F. Zhang, D. C. Jia, Z. H. Yang, X. M. Duan and Y. Zhou: ‘Microstructural features and properties of the nanocrystalline SiC/BN(C) composite ceramic prepared from the mechanically alloyed SiBCN powder’, J. Alloys Compd., 2012, 537, (5), 346–356. doi: 10.1016/j.jallcom.2012.05.073
   Web of Science ®Google Scholar