Shear strength tests of glass ceramic sealant for solid oxide fuel cells applications

References

• J. H. Lee, H. Kim, S. M. Kim, T. W. Noh, H. Y. Jung, H. Y. Lim, H. G. Jung, J. W. Son, H. R. Kim, B. K. Kim, H. J. Je, J. C. Lee, H. Song and H. W. Lee: ‘Effect of elastic network of ceramic fillers on thermal cycle stability of a solid oxide fuel cell stack’, Adv. Energy Mater., 2012, 2, 461–468.
   Web of Science ®Google Scholar
• L. Blum, L. G. J. de Haart, J. Malzbender, N. H. Menzler, J. Remmel and R. Steinberger-Wilckens: ‘Recent results in Jülich solid oxide fuel cell technology development’, J. Power Sources, 2013, 241, 477–485.
   Web of Science ®Google Scholar
• M. K. Mahapatra and K. Lu: ‘Seal glass for solid oxide fuel cell’, J. Power Sources, 2010, 195, 7129–7139.
   Web of Science ®Google Scholar
• D. U. Tulyaganov, A. A. Reddy, V. V. Kharton and J. M. F. Ferreira: ‘Aluminosilicate-based sealants for SOFCs and other electrochemical applications - a brief review’, J. Power Sources, 2013, 242, 486–502.
   Web of Science ®Google Scholar
• J. W. Fergus: ‘Sealants for solid oxide fuel cells’, J. Power Sources, 2005, 147, 46–57.
   Web of Science ®Google Scholar
• A. Shyam, R. Trejo, D. McClurg, A. Ladouceur, M. Kirkham, X. Song, J. Howe and E. Lara-Curzio: ‘Microstructural evolution in two alkali multicomponent silicate glasses as a result of long-term exposure to solid oxide fuel cell environments’, J. Mater. Sci., 2013, 48, 5880–5898.
   Web of Science ®Google Scholar
• F. Smeacetto, M. Salvo, M. Santarelli, P. Leone, G. A. Ortigoza-Villalba, A. Lanzini, L. C. Ajitdoss and M. Ferraris: ‘Performance of a glass-ceramic sealant in SOFC short stack’, Int. J. Hydrogen Energy, 2013, 38, 588–596.
   Web of Science ®Google Scholar
• A. A. Reddy, N. Eghtesadi, D. U. Tulyaganov, M. J. Pascual, L. F. Santos, S. Rajesh, F. M. B. Marques and J. M. F. Ferreira: ‘‘Bi-layer glass-ceramic sealant for solid oxide fuel cells’, J. Eur. Ceram. Soc., 2014, 34, 1449–1455.
   Web of Science ®Google Scholar
• J. H. Hsu, C. W. Kim, R. K. Brow, J. Szabo, R. Crouch and R. Baird: ‘An alkali-free barium borosilicate viscous sealing glass for solid oxide fuel cells’, J. Power Sources, 2014, 270, 14–20.
   Web of Science ®Google Scholar
• S. Celik: ‘Influential parameters and performance of a glass-ceramic sealant for solid oxide fuel cells’, Ceram. Int., 2015, 41, 2744–2751.
   Web of Science ®Google Scholar
• F. Smeacetto, M. Salvo, M. Ferraris, V. Casalegno, P. Asinari and A. Chrysanthou: ‘Characterization and performance of glass-ceramic sealant to join metallic interconnects to YSZ and anode-supported-electrolyte in planar SOFCs’, J. Eur. Ceram. Soc., 2008, 28, 2521–2527.
   Web of Science ®Google Scholar
• C. K. Lin, J. Y. Chen, J. W. Tian, L. K. Chiang and S. H. Wu: ‘Joint strength of a solid oxide fuel cell glass-ceramic sealant with metallic interconnect’, J. Power Sources, 2012, 205, 307–317.
   Web of Science ®Google Scholar
• Y. S. Chou, J. W. Stevenson and P. Singh: ‘Effect of pre-oxidation and environmental aging on the seal strength of a novel high-temperature solid oxide fuel cell (SOFC) sealing glass with metallic interconnect’, J. Power Sources, 2008, 184, 238–244.
   Web of Science ®Google Scholar
• Y. S. Chou, J. W. Stevenson and P. Singh: ‘Effect of aluminizing of Cr-containing ferritic alloys on the seal strength of a novel high-temperature solid oxide fuel cell sealing glass’, J. Power Sources, 2008, 185, 1001–1008.
   Web of Science ®Google Scholar
• S. M. Gross, D. Federmann, J. Remmel and M. Pap: ‘Reinforced composite sealants for SOFC applications’, J. Power Sources, 2011, 196, 7338–7342.
   Web of Science ®Google Scholar
• J. Malzbender and Y. Zhao: ‘Flexural strength and viscosity of glass ceramic sealants for solid oxide fuel cell stacks’, Fuel Cells, 2012, 12, (1), 47–53.
   Web of Science ®Google Scholar
• K. L. Lin, M. Singh, R. Asthana and C. H. Lin: ‘Interfacial and mechanical characterization of yttria-stabilized zirconia (YSZ) to stainless steel joints fabricated using Ag-Cu-Ti interlayers’, Ceram. Int., 2014, 40, 2063–2071.
   Web of Science ®Google Scholar
• M. Ferraris, A. Ventrella, M. Salvo and D. Gross: ‘Shear strength measurement of AV119 epoxy-joined SiC by different torsion tests’, Int. J. Appl. Ceram. Technol., 2014, 11, (2), 394–401.
   Web of Science ®Google Scholar
• M. Ferraris, A. Ventrella, M. Salvo, Y. Katoh and D. Gross: ‘Torsional shear strength tests for glass-ceramic joined silicon carbide’, Int. J. Appl. Ceram. Technol., 2015, 12, (3), 693–699.
   Web of Science ®Google Scholar
• M. Ferraris, M. Salvo, V. Casalegno, M. Avalle and A. Ventrella: ‘Torsion tests on AV119 epoxy-joined SiC’, Int. J. Appl. Ceram. Technol., 2012, 9, 795–807.
   Web of Science ®Google Scholar
• M. Ferraris, M. Salvo, S. Rizzo, V. Casalegno, H. Shaohua, A. Ventrella, T. Hinoki and Y. Katoh: ‘Torsional shear strength of silicon carbide components pressurelessly joined by a glass-ceramic’, Int. J. Appl. Ceram. Technol., 2012, 9, 786–794.
   Web of Science ®Google Scholar
• ASTM Internation: ‘Standard test method for shear strength of fusion bonded polycarbonate aerospace glazing material’, ASTM F734-95, ASTM International, West Conshohocken, PA, USA 2006.
   Google Scholar
• ASTM Internation: ‘Standard test method for shear strength and shear modulus of aerospace glazing interlayer materials’, ASTM F1362-97, ASTM International, West Conshohocken, PA, USA 2003.
   Google Scholar
• F. Smeacetto, A. De Miranda, A. Chrysanthou, E. Bernardo, M. Secco, M. Bindi, M. Salvo, A. G. Sabato and M. Ferraris: ‘Novel glass-ceramic composition as sealant for SOFCs’, J. Am. Ceram. Soc., 2014, 97, 3835–3842.
   Web of Science ®Google Scholar
• L. Cooper, S. Benhaddad, A. Wood and D. G. Ivey: ‘The effect of surface treatment on the oxidation of ferritic stainless steels used for solid oxide fuel cell interconnects’, J. Power Sources, 2008, 220–228.
   Web of Science ®Google Scholar
• D. Gross, W. Hauger, J. Schroeder, W. A. Wall and J. Bonet: ‘Engineering mechanics 2’, 2011, Heidelberg, Springer.
   Google Scholar
• K. Schneider, B. Lauke and W. Beckert: ‘Compression shear test (CST)- a convenient apparatus for the estimation of apparent shear strength of composite materials’, Appl. Compos. Mater., 2001, 8, 43–62.
   Web of Science ®Google Scholar
• M. R. Ayatollahi and M. R. M. Aliha: ‘Fracture analysis of some ceramics under mixed mode loading’, J. Am. Ceram. Soc, 2011, 94, 561–569.
   Web of Science ®Google Scholar
• ASTM Internation: ‘Standard test method for apparent shear strength of single-lap-joint adhesively bonded metal specimens by tension loading (metal-to-metal)’, ASTM D1002-10, ASTM International, West Conshohocken, PA, USA 2010.
   Google Scholar