4
Views
0
CrossRef citations to date
0
Altmetric
Original Article

Experimental investigation of performance and emission improvement by altering ignition timing with use of E10 ethanol blend in SI engine

, , &
Pages 160-166 | Received 11 Sep 2012, Accepted 14 Jan 2013, Published online: 12 Apr 2016

References

  • Ceviz MA, Yüksel F: Appl. Therm. Eng., 2005, 25, 917–925.
  • Bechtold RL: ‘Alternative fuels handbook’; 1997, Warrendale, PA, SAE Press.
  • Koç M, Sekmen Y, Topgül T, Yücesu HS: Renewable Energy, 2009, 34, 2101–2106.
  • Celik MB: Appl. Therm. Eng., 2008, 28, 396–404.
  • Al-Dawood AM: ‘Effects of Blending MTBE, Methanol, or Ethanol with Gasoline on Performance and Exhaust Emissions of Engines’, Master of Science in Mechanical Engineering, King Fahd University of Petroleum & Minerals, Dhahran, Saudi Arabia 1998.
  • Costa RC, Sodre JR: Appl. Therm. Eng., 2011, 31, 278–283.
  • Turner D, Xu H, Cracknell RF, Natarajan V, Chen X: Fuel, 2011, 90, 1999–2006.
  • Bayraktar H: Renewable Energy, 2005, 30, 1733–1747.
  • Roberts MC: Energy Policy, 2008, 36, 1233–1235.
  • Hsieh WD, Chen RH, Wu TL, Lin TH: Atmos. Environ., 2002, 36, 403–10.
  • Caffrey PJ, Rao V: ‘Investigation into the Vehicular Exhaust Emission of High Percentage Ethanol Blends’, SAE paper no. 950777, SAE International, Warrendale, PA, USA, 1995.
  • Taylor AB, Mocan DP, Bell AJ, Hodgson NG, Myburgh IS, Botha JJ: ‘Gasoline/Alcohol Blends: Exhaust Emission, Performance and Burn-Rate in Multi-Valve Production Engine’, SAE paper no. 961988, SAE International, Warrendale, PA, USA, 1996.
  • Chen RH, Chiang LB, Chen CN, Lin TH: Appl. Therm. Eng., 2011, 31, 1463–1467.
  • Zervas E, Montagne X, Lahaye J: J. Air Waste Manage. Assoc., 1999, 49, 1304–1314.
  • Zervas E, Montagne X, Lahaye J: Environ. Sci. Technol., 2001, 35, 2746–2751.
  • Magnusson R, Nilsson C, Andersson B: Environ. Sci. Technol., 2002, 36, 1656–1664.
  • Yucesu HS, Topgul T, Cinar C, Okur M: Appl. Therm. Eng., 2006, 26, 2272–2278.
  • Topgul T, Yucesu HS, Cinar C, Koca A: Renewable Energy, 2006, 31, 2534–2542.
  • Chao HR, Lin TC, Chao MR, Chang FH, Huang CI, Chen CB: J. Hazard. Mater., 2000, 13, 39–54.
  • Rideout G, Kirshenblatt M, Prakash C: ‘Emissions from Methanol, Ethanol, and Diesel Powered Urban Transit Buses’, SAE paper no. 942261, SAE International, Warrendale, PA, USA, 1994.
  • Rice RW, Sanyal AK, Elrod AC, Bata RM: J. Eng. Gas Turbines Power, 1991, 113, 337–381.
  • Jia LW, Shen MQ, Wang J, Lin MQ: J. Hazard. Mater., 2005, A123, 29–34.
  • Palmer F H: Proc. Int. Conf. on ‘Petroleum based fuels and automotive applications’, Int. Conf. on Petroleum Based Fuels and Automotive Applications, London, UK, November 1986, 33–46.
  • Hamdan MA, Jubran BA: Dirasat, 1986, 13, 229–244.
  • Badwan MS: ‘Performance and Knock Limits of Ethanol-Gasoline Blends in Spark-Ignited Engines’, SAE paper no. 850213, SAE International, Warrendale, PA, USA, 1985.
  • Alexandrian M, Schwalm M: ‘Comparison of Ethanol and Gasoline as Automotive Fuels’, ASME paper no. 92-WA/DE-15, ASME, New York, USA, 1992, 1–10.
  • Taljaard HC, Jaardaan CFP, Both JJ: SAE paper no. 91037, SAE International, Warrendale, PA, USA, 1991.
  • Al-Hasan M: Energy Convers. Manage., 2003, 44, 1547–1561.
  • Al-Farayedhi AA, Al-Dawood AM, Gandhidasan P: J. Eng. Gas Turbines Power, 2004, 126, 178–189.
  • Hara T, Tanoue K: ‘Laminar Flame Speed of Ethanol, n-Heptane, Iso-Octane Air Mixtures’, SAE paper no. 2006-05-0409, SAE International, Warrendale, PA, USA, 2006.
  • Beeckmann J, Röhl O, Peters N: ‘Numerical and Experimental Investigation of Laminar Burning Velocities of Iso-Octane, Ethanol and n-Butanol’, SAE paper no. 2009-01-2784, SAE International, Warrendale, PA, USA, 2009.
  • Farrell JT, Johnston RJ, Androulakis IP: ‘Molecular Structure Effects on Laminar Burning Velocities at Elevated Temperature and Pressure’, SAE paper no. 2004-01-2936, SAE International, Warrendale, PA, USA, 2004.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.