References
- G. G. Stoney: Proc. Roy. Soc. Lond A, 1909, 82A, 172–175.
- C. C. Chiu: Mater. Sci Eng. A, 1992, A150, 139–148.
- T. P. Hoar and D. J. Arrowsmith: Trans. Inst. Met. Finish., 1957, 34, 354–363.
- T. F. Page and S. V. Hainsworth: Surf Coat. Technol, 1993, 61, 201–208.
- S. V. Hainsworth, T. Bartlett and T. F. Page: Thin Solid Films, 1993, 236, 214–218.
- S. V. Hainsworth, M. R. McGurk and T. F. Page: Surf Coat. Technol, 1998, 102, 97–107.
- M. R. McGurk and T. F. Page: J. Mater. Res., 1999, 14, 2283–2295.
- M. V. Swain and J. Mencik: Thin Solid Films, 1994, 253, 204–211.
- G. M. Pharr and W. C. Oliver: Mater. Res. Soc. Bull., 1992, 17,28–33.
- H. Y. Yu, S. C. Sanday and B. B. Rath: J. Mech. Phys. Solids, 1990, 38, 745–768.
- N. M. Jennett, G. Aldrich-Smith and A. S. Maxwell: J. Mater. Res., 2004, 19, 143–148.
- M. F. Doerner and W. D. Nix: J. Mater. Res., 1986, 1, 601–609.
- W. C. Oliver and G. M. Pharr: J. Mater. Res., 1992,7, 1564–1583.
- G. M. Pharr, W. C. Oliver and F. R. Brotzen: J. Mater. Res., 1992, 7, 613–617.
- J. L. Loubet, J. M. Georges and G. Meille: in `Microindentation techniques in materials science and engineering', (ed. P. J. Blau and B. R. Lawn), 72–89; Philadelphia, PA, ASTM.
- W. C. Oliver and G. M. Pharr: J. Mater. Res., 2004, 19, 3–20.
- I. Sneddon: Int. J. Eng. Sci, 1965, 3, 47–57.
- J. C. Hay, A. Bolshakov and G. M. Pharr: J. Mater. Res., 1999, 14, 2296–2305.
- R. S. Alwitt, J. Xu and R. C. McClung: J. Electrochem. Soc., 1993, 140, 1241–1246.
- R. Koop and Y. Moji: SAE Technical Report No. 920944, Society of Automotive Engineers, Warrendale, PA, USA, 1992, 1–8.
- D. H. Bradhurst and J. S. L. Leach: J. Electrochem. Soc., 1966, 113, 1245–1249.
- B. S. Hockenhull, S. S. Gupta and R. C. Hurst: Trans. Inst. Met. Finish., 1976, 54, 123–126.