References
- M. Taneike, F. Abe and K. Sawada: 'Creep-strengthening of steels at high temperatures using nano-sized carbonitride dispersions', Nature, 2003, 424, 294.
- T. Horiuchi, M. Igarashi and F. Abe: 'Improved utilization of added B in 9Cr heat-resistant steels containing W', ISIJ Int., 2002, 42, S67.
- H. Semba and F. Abe: 'Alloy design and creep strength of advanced 9%Cr USC boiler steels containing high concentration of boron', Energy Mater., 2006, 1, 238.
- F. Abe and M. Tabuchi: `Microstructural and creep strength of welds in advanced ferritic power plant steels', Set Technol Weld Join., 2004, 9, 22.
- M. Kondo, M. Tabuchi, S. Tsukamoto, F. Yin and F. Abe: 'Suppressing type IV failure via modification of heat affected zone microstructures using high boron content in 9Cr heat resistant steel welded joints', Set Technol. Weld. Join., 2006, 11, 216.
- F. Abe, S. Nakazawa, H. Araki and T. Noda: 'The role of microstructural instability on creep behaviour of a low radio-activation martensitic 9Cr-2W steel', Metall Trans. A, 1992, 23A, 469.
- R. Wu, R. Sandström and J. Storesund: 'Creep strain behaviour in a 12%CrMoV steel', Mater. High Temp., 1994, 12, 277.
- M. Prager: 'Development of the MPC omega method for life assessment in the creep range', J. Pressure Vessel Technol., 1995, 117, 95.
- F. Abe: 'Effect of boron on creep deformation behaviour and microstructure evolution in 9%Cr steel at 650°C', Int. J. Mater. Res., 2008, 99, 387.
- K. Sakuraya, H. Okada and F. Abe: `BN type inclusions formed in high Cr ferritic heat resistant steel', Energy Mater., 2006, 1, 158.
- L. Karlsson and H. Norden: Non-equilibrium grain boundary segregation of boron in austenitic stainless steels — II Fine segregation behaviour', Acta Metall, 1988, 36, 13.
- F. Abe, M. Tabuchi and S. Tsukamoto: 'Metallurgy of type IV fracture in advanced ferritic power plant steels', Proc. Int. HIDA-5 Conf., Surrey, UK, 2010, CD-ROM.
- S. Tsukamoto, M. Tabuchi, T. Shirane and F. Abe, Proceedings of 60th Annual Assembly and International Conference of IIW, Dubrovnik, Croatia, July 2007, CD-ROM.
- F. Abe: 'Precipitate design for creep strengthening of 9%Cr tempered martensitic steel for USC power plant', Set Technol. Adv. Mater., 2008, 9, 013002.
- F. Abe, M. Tabuchi, S. Tsukamoto and T. Shirane: 'Microstructure evolution in HAZ and suppression of type IV fracture in advanced ferritic power plant steels', Int. J. Press. Vessels Pip., 2010, 87, 598.
- F. Abe, M. Tabuchi, H. Semba, M. Igarashi, M. Yoshizawa, N. Komai and A. Fujita: 'Feasibility of MARBN steel for application to thick section boiler components in USC power plant at 650°C', Proc. 5th EPRI Int. Conf., Marco Island, FL, USA, 2007, CD-ROM.
- T. Shirane, S. Tsukamoto, K. Tsuzaki, Y. Adachi, T. Hanamura, M. Shimizu and F. Abe: 'Ferrite to austenite reverse transforma-tion process in B containing 9%Cr heat resistant steel HAZ', Set Technol. Weld Join., 2009, 14, 698–707.