References
- P. Paulin: 'Frozen gears', Gear Technol, 1993, 10, 26–28.
- E. A. Carlson: 'ASM metals handbook', IX edition, 203–220; 1981, Metals Park, OH, ASM International.
- 'Improvement of the automotive tools and components through the applications of deep cryogenic treatments - CRY0', Project RFSR-CT-2007-00026, EU, Brussels, Belgium, 2007.
- E. J. Mittemeijer: 'Analysis of the kinetiks of phase transforma-tions', J. Mater. Set, 1992, 27, 3977–3987.
- E. J. Mittemeijer and I. A. Wierszillowsky: 'The isothermal and nonisothermal kinetiks of tempering iron-carbon and iron-nitro-gen martensites and austenites', Z. Metallkd, 1991, 82, (6), 420–429.
- L. Cheng, C. M. Brakman, B. M. Korevaar and E. J. Mittemeijer: Metall Trans. A, 1988, 19A, 2415.
- P. V. Morra, A. J. Bottger and E. J. Mittemeijer: 'Decomposition of iron based martensite. A kinetic analysis by means of differential scanning calorimetry and dilatometry', J. Therm. Anal. Calorim., 2001, 64, 905–914.
- M. Pellizzari, A. Molinari, S. Gialanella and G. Straffelini: 'Effetto del trattamento criogenico sulle proprietà microstrutturali dell'ac-ciaio AISI H13', Metall Ital., 2001, 1, 21–27.
- M. Pellizzari and A. Molinari: 'Deep cryogenic treatment of cold work tool steel', (ed. J. Bergstrom et al), Proc. 6th Int. Tooling Conf., Karlstadt, Sweden, September 2002, Kartstad University, 547–557.
- R. Kelkar, P. Nash and Y. Thu: 'The mechanism of property enhancement in M2 tool steel by cryogenic treatment', Proc. Conf. Materials Science and Technology 2003 Incorporating the 2003 Fall Meet. of TMS and the 45th ISS Mechanical Working and Steel Processing Conf., Chicago, IL, USA, November, 2003, TMS, availalte online at http://tptc.iit.edu/center/papers/cryo-paper.pdf.
- D. Yun, L. Xiaoping and X. Hongshen: Heat Treat. Met., 1998,3, 55.
- D. N. Collins and J. Dormer: Heat Treat. Met., 1997, 3, 71.
- D. Das, A. K. Dutta, V. Toppo and K. K. Ray: 'Effect of deep cryogenic treatment on the carbide precipitation and tribological behavior of D2 steel', Mater. Manuf Processes, 2007, 22, (4), 474–480.
- D. Das, A. K. Dutta and K. K. Ray: 'On the refinement of carbide precipitates by cryotreatment in AISI D2 steel', Philos. Mag., 2009, 89, (1), 55–76.
- R. B. Reasbeck: 'Improved tool life by the cryotough treatment', Metallurgia, 1989, 56, 178–179.
- W. R. Tarr and S. K. Ree: Proc. 7th Symp. on `Thermophysics properties', Gaithersberg, MD, USA, May 1977, ASME, 135–140.
- C. J. Isaak and W. Reitz: Mater. Manuf Processes, 2008, 23, 82–91.
- R. J. Rioja and D. E. Laughlin: Acta Metall, 1980, 29, 1301.