References
- Zöller A, Frank T, Haufe A: ‘Berücksichtigung von Blechumformergebnissen in der Crashberechnung’, Proc. 3rd German LS-DYNA Forum, Bamberg, Germany, October 2004, DYNAmore GmbH, B–I-1–B–I-3.
- Albiez C, Polzer A, Görres A, Sindel M, Liewald M: ‘Bewertung der Oberflächenqualität von Blechbauteilen nach thermischen Prozessen’, Werkstattstech. Online, 2010, 10, 743–752.
- Neugebauer R, Rössinger M, Wahl M, Schulz A, Eckert A, Schützle W: ‘Predicting dimensional accuracy of mechanically joined car body assemblies’, Proc. Conf. SheMet 2011, Leuven, Belgium, April 2011, KU Leuven, 973–981.
- Awiszus B, Bolick S, Pinner S: ‘Durchgängige Simulationsprozessketten in der Fahrzeugentwicklung’, Proc. Int. Konf. on ‘Neuere Entwicklungen in der Blechumformung’, Fellbach, Germany, March 2010, IFU, 65–85.
- Albiez C, Liewald M, Görres A, Regensburger J: ‘Enhanced requirements for surface quality of outer car body shells according to thermal manufacturing processes’, Proc. Conf. SheMet 2011, Leuven, Belgium, April 2011, KU Leuven, 957–965.
- Braess H, Seiffert U: ‘Vieweg Handbuch Kraftfahrzeugtechnik’, 4th edn; 2005, Wiesbaden, Vieweg Verlag.
- Blanke D: ‘Modellierung und numerische Simulation des Aufheizverhaltens von PKW-Bauteilen und –Karosserien’, Dissertation, Technische Universität Darmstadt, Darmstadt, Germany, 2009.
- Liu Y.-N: ‘Advanced manufacturing technology development’; 2004, Dearborn, MI, Ford Motor Company.
- Paulke S: ‘Ein Betrag zur Herleitung und Lösung nichtlinearer, thermomechanisch gekoppelter Grundgleichungen für Schalentragwerke’, PhD thesis, Universität der Bundes-wehr München, München, Germany, 2002.
- Irretier A: ‘Sonderforschungsbereich 570, “Distortion Engineering”’, Projekt C1 – Stoffwertebestimmung, Schlussbericht, University of Bremen, Bremen, Germany, 2009.
- Furrer P, Bloeck M: ‘Kosteneffizienter Leichtbau – realisiert mit Aluminium’, Proc. 5th Chemnitzer Karosseriekolloq. (CBC 2008), Chemnitz, Germany, November 2008, TU Chemnitz, 211–218.
- Ostermann F: ‘Anwendungstechnologie Aluminium’, 2nd edn; 2007, Berlin/Heidelberg/New York, Springer.
- Hatch J: ‘Aluminum: properties and physical metallurgy’; 1984, Metals Park, OH, ASM International.
- Ludwik P: ‘Elemente der technologischen Mechanik’; 1909, Berlin, Springer-Verlag.
- Hollomon JH: ‘Tensile deformation’, Trans. Met. Soc. AIME, 1945, 162, 2668–2690.
- Swift HW: ‘Plastic instability under plane stress’, J. Mech. Phys. Solids, 1952, 1, 1–8.
- Backofen WA, Gosh AK: ‘Strain hardening and instability in biaxially stretched sheets’, Metall. Trans., 1973, 4, 1113–1123.
- Voce E: J. Inst. Met., 1948, 74, 537–562.
- Armstrong PE, Hocket JE, Sherby OD: ‘Large strain multidirectional deformation of 1100 aluminium at 300 K’, J. Mech. Phys. Solids, 1982, 30, 37–58.
- Callister WD: ‘Materials science and engineering’; 2003, New York, Wiley.
- Gottstein G: ‘Physical metallurgy’, in ‘Virtual production of industrial aluminium production’, (ed. , Hirsch J, ed), 85–110; 2006, New York, Wiley-VCH.
- Myhr OR, Grog O: ‘Modelling of the age hardening behavior of Al–Mg–Si alloys’, Acta Mater., 2001, 49, 65–75.
- Gouttebroze S, Mo A, Grog O, Peterson KO, Fjaer HG: ‘A new constitutive model for the finite element simulation of local hot forming of aluminum 6xxx alloys’, Metall. Mater. Trans. A, 2008, 49A, 522–534.
- Birol Y: ‘DSC analysis of the precipitation reactions in the alloy AA6082: Effect of sample preperation’, J. Therm. Anal. Calorim., 2006, 83, 219–222.
- Kozeschnik E, Svoboda J, Fischer FD, Fratzl P: ‘Modelling of kinetics in multi-component multi-phase systems with spherical precipitates’, Mater. Sci. Eng. A, 2004, A385, 166–174.