Advanced search
Publication Cover
International Heat Treatment and Surface Engineering Volume 6, 2012 - Issue 3
Journal homepage
13
Views
0
CrossRef citations to date
0
Altmetric
Original Article

Electrospark alloying of Mg–La electrode on ZM5 Mg alloy under distilled water or kerosene

C J Chen School of Mechanical and Electrical EngineeringLaser Processing Research Center, Soochow University, Suzhou215021, China; Key Laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of EducationLaser Processing Research Center, College of Materials and Metallurgy, Wuhan University of Science & Technology, Wuhan, ChinaCorrespondence[email protected]
,
M Zhang School of Mechanical and Electrical EngineeringLaser Processing Research Center, Soochow University, Suzhou215021, China; Key Laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of EducationLaser Processing Research Center, College of Materials and Metallurgy, Wuhan University of Science & Technology, Wuhan, China
,
Y Z Su Key Laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of EducationLaser Processing Research Center, College of Materials and Metallurgy, Wuhan University of Science & Technology, Wuhan, China
,
S C Zhang Key Laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of EducationLaser Processing Research Center, College of Materials and Metallurgy, Wuhan University of Science & Technology, Wuhan, China
&
J L Zhou Key Laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of EducationLaser Processing Research Center, College of Materials and Metallurgy, Wuhan University of Science & Technology, Wuhan, China
Pages 122-130 | Published online: 12 Nov 2013

References

  • Chen CJ, Su YZ, Cao Q, Zhang M: ‘Study on cavitation erosion properties of stainless steel vane wheel enhanced by electro-spark deposition (ESD) technology’, Adv. Mater. Res., 2011, 239–242, 2229–2232.
  • Chen CJ, Su YZ, Xu X, Zhang M: ‘High energy micro-arc alloying of Mg-RE on AZ31 Mg alloy’, Adv. Mater. Res., 2011, 306–307, 443–446.
  • Chen CJ, Wang MC, Wang DS, Jin R, Liu YM: ‘High energy micro-arc alloying on ZM2 Mg-base alloy by ZM2 alloy’, Surf. Eng., 2007, 23, (5), 344–349.
  • Chen CJ, Wang MC, Wang DS, Jin R, Liu YM: ‘Mass transfer trends and the formation of a single deposition spot during high-energy micro-arc alloying of AZ31 Mg alloy’, J. Mater. Process. Technol., 2008, 198, 275–280.
  • Chen CJ, Wang MC, Wang DS, Laing HS, Feng P: ‘Characterisation of electrospark deposition stellite 6 alloy coating on 316L sealed valve used in nuclear power plant’, Mater. Sci. Technol., 2010, 26, (3), 276–280.
  • Chen CJ, Zhang M, Cao Q, Chang QM, Zhang SC, Chen X: ‘Primary study of high-energy micro-arc alloying on In718 superalloy under distilled water’, Proc. Int. Conf. on ‘Mechanic automation and control’ Wuhan, China, June 2010, IEEE, 3852–3855.
  • Chen CJ, Zhang M, Zhang SC, Chang QM, Chen X: ‘Study on NiCrAl coating alloyed on In718 Ni-base alloy by high-energy micro-arc alloying processing’, Adv. Sci. Lett., 2011, 4, (3), 996–1001.
  • Bai C.-Y, Koo C.-H: ‘Effects of kerosene or distilled water as dielectric on electrical discharge alloying of superalloy haynes 230 with Al–Mo composite electrode’, Surf. Coat. Technol., 2006, 200, 4127–4135.
  • Takenaka T, Ono T, Narazaki Y, Naka Y, Kawakami M: ‘Improvement of corrosion resistance of magnesium metal by rare earth elements’, Electrochim. Acta, 2007, 53, 117–121.
  • Birbilis N, Easton MA, Sudholz AD, Zhu SM, Gibson MA: ‘On the corrosion of binary magnesium-rare earth alloys’, Corros. Sci., 2009, 51, 683–689.
  • Sudholz AD, Gusieva K, Chen XB, Muddle BC, Gibson MA, Birbilis N: ‘Electrochemical behaviour and corrosion of Mg–Y alloys’, Corros. Sci., 2011, 53, 2277–2282.
  • Tsunekawa Y, Okumiya M, Mohri N, Kuribe E: ‘Formation of composite layer containing TiC precipitates by electrical discharge alloying’, Mater. Trans., JIM, 1997, 38, (7), 630–635.
  • Lee HG, Simao J, Aspinwall DK: ‘Electrical discharge surface alloying’, J. Mater. Process. Technol., 2004, 149, 334–340.
  • Watanabe A, Yokoi H: ‘Aerosol, gas, and swarf production during underwater cutting of reactor core internals using electron discharge machining’, J. Nucl. Sci. Technol., 2007, 44, (10), 1317–1323.
  • Johnson RN, Sheldon GL: ‘Advances in the electrospark deposition coating process’, J. Vacuum Sci., 1986, 4, 2740–2746.
  • Agarwal A, Dahotre NB: ‘Synthesis of boride coating on steel using high energy density processes: comparative study of evolution of microstructure’, Mater. Charact., 1999, 42, (1), 31–44.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.