References
- Z. Kolosvary: Int. Heat Treat. Surf Eng., 2007, 1, (1), 13–20.
- T. Bell: Surf Eng., 1990, 6, 31.
- C. D. Horvath: Proc. Great Designs in Steel Sem., Livonia, MI, USA, February 2004, AISI, Internet www.autosteel.org
- G. Frommeyer, U. Brux and P. Neumann: ISIJ Int., 2003, 43, 438.
- Porsche Engineering Services: Engineering Report ULSAB-AVC, AISI, Washington, DC, USA, 2001.
- B. K. Zuidema, S. G. Denner, B. Engl and J.-O. Sperle: SAE Tech. Pap., 2001, 2001–01–3042.
- D. Lorincz: Proc. Great Designs in Steel Sem., AISI, Internet www.autosteel.org
- R. P. Krupitzer, D. M. Urban and D. A. Witmer: Proc. Conf. Galvatech '04, Chicago, IL, USA, April 2004, AIST, 31.
- Proc. Conf. Galvatech '89, Tokyo, Japan, September 1989, ISIJ.
- Proc. Conf. Galvatech '04, Chicago, IL, USA, April 2004, AIST.
- Proc. Conf. Galvatech '07, Tokyo, Japan, November 2007, ISIJ.
- F. E. Goodwin and E. A. Silva: Proc. Conf. Galvatech '07, Tokyo, Japan, November 2007, ISIJ, Paper PL-2, 6–13.
- A. Nicholson and D. S. Thornton: in 'Constitution and properties of steel', (ed. F. B. Pickering), Vol. 7, 'Materials science and technology', 95; 1992, Weinheim, VCH.
- B. L. Bramfitt and P. L. Mangonon, Jr (eds.): 'Metallurgy of continuous-annealed sheet steel': 1982, New York, TMS-AIME.
- G. A. Irons: 'John F. Elliott Lecture'; 2008, Warrendale, PA, AIST.
- G. Krauss: 'Steels: processing, structure, and performance'; 2005, Materials Park, OH, ASM International.
- W. C. Leslie: 'The physical metallurgy of steels': 1981, New York, McGraw-Hill.
- F. B. Pickering: in 'Constitution and properties of steels', (ed. F. B. Pickering), Vol. 7, 'Material science and technology', 41; 1992, Weinheim, VCH.
- T. Gladman: 'The physical metallurgy of microalloyed steels', Book 615; 1997, London, The Institute of Metals.
- M. Cohen and S. S. Hansen: in Proc. Symp. on MiCon 78: Optimization of processing, properties and service performance through microstructural control, (ed. H. Abrams et al), 1979, ASTM 672, 34; 1979, Philadelphia, PA, ASTM.
- M. S. Rashid and B. V. N. Rao: in 'Fundamental of dual-phase steels', (ed. R. A. Kot and B. L. Bramfitt), 219; 1981, Warrendale, PA, TMS-AIME.
- S. Hayami and T. Furukawa: in Proc. Conf. Microalloying '75, 311; 1977, New York, Union Carbide Corp.
- A. Cramb and M. Byrne: in 'Metallurgy of vacuum-degassed steel products', (ed. R. Pradhan), 3; 1990, Warrendale, PA, TMS.
- Y. Sakuma, D. K. Matlock and G. Krauss: Metall. Trans. A, 1992, 23A, 1221.
- M. Säglitz, D. K. Matlock and G. Krauss: in Proc. Int. Conf. on 'Advanced high- strength sheet steels', 147; 2008, Warrendale, PA, AIST.
- P. Hein and J. Wilsus: Steel Res. Int., 2008, 79, 85.
- AISI: 'The use of steel long products in future vehicle construction': 2005, Washington, DC, AISI.