Advanced search
Publication Cover
Tribology - Materials, Surfaces & Interfaces Volume 3, 2009 - Issue 2
Journal homepage
32
Views
3
CrossRef citations to date
0
Altmetric
Articles

Failure analyses of cemented tungsten carbide extrusion die

C. P. KhatterCentral Institute of Hand Tools, Jalandhar 144 008, Ministry of MSME, India
,
B. L. SethiDepartment of Mechanical Engineering, M.M. Engineering College, Mulana, India
&
O. P. PandeySchool of Physics and Materials Science Thapar University, Patiala147004, India
Pages 62-67 | Published online: 19 Jul 2013

References

  • V. K. Sarin and J. N. Lindstrom: 'The effect of eta phase on the properties of CVD TiC-coated cemented carbide cutting tools', J. Electrochem. Soc., 1979, 126, 1281–1287.
  • G. S. Upadhyaya: 'Cemented tungsten carbides- production, properties, and testing'; 1998, Norwich, NY, William Andrew Publishing/Noyes
  • H. T. Lee and T. Y. Tai: 'Relationship between EDM parameters and surface crack formation', J. Mater. Process. Technol, 2003, 142, 676–683.
  • W. Konig, D. F. Dauw, G. Levy and U. Panten: `EDM failure steps towards the machining of ceramics', CIRP Ann. Manuf Technol, 1988, 37, 623–631.
  • Y.-C. Lin, Y.-F. Chen, C.-T. Lin and H.-J. Tzeng: 'Electrical discharge energy on machining of cemented tungsten carbide', Mater. Process., 2008, 23, (4), 391–399.
  • S. H. Lee and X. P. Li: 'Study of the effect of machining parameters on the machining characteristics in electrical discharge machining of tungsten carbide', J. Mater. Process Technol, 2001, 115, 344–258.
  • R. A. Mahdavinejad and A. Mahdavinejad: 'ED machining of WC-CO', J. Mater. Process. Technol., 2005, 163, 637–643.
  • P. C. Pandey and H. S. Shan: 'Modern machining processes'; 2000, New Delhi, Tata MacGraw-Hill Publishing Company Limited.
  • I. Puertas, C. J. Luis and L. Alvarez: 'Analysis of the influence of EDM parameters on surface quality, MRR and electrode wear of WC-CO', J. Mater. Process. Technol., 2004, 153–154, 1026–1032.
  • H. Ramaswamy and L. Blunt: 'Effect of EDM process parameters on 3D surface topography', J. Mater. Sci. Process. Technol, 2004, 148, 155–164.
  • S. H. Lee and X. P. Li: 'Study of the surface integrity of the machined workpiece in the EDM of tungsten carbide', J. Mater. Process. Technol, 2003, 139, 315–321
  • K. L. Wu, B. H. Yan, F. Y. Huang and S. C. Chen: 'Improvement of surface finish and surfactant added dielectric', Int. J. Mach. Tools Manuf, 2005, 45, 1195–1201.
  • Y.-C. Lin, Y.-F. Chen, C.-T. Lin and H.-J. Tzeng: 'Electrical discharge machining (EDM) characteristics associated with elec-trical discharge energy on machining of cemented tungsten carbide', Mater. Manuf Process., 2008, 23, 391–399.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.