References
- Patel A, Bliss J, Calfee RP, Froehlich J, Limbird R: ‘Modular femoral stem–sleeve junction failure after primary total hip arthroplasty’, J. Arthroplasty, 2009, 24, (7), 1143.e1–1143.e5.
- Choromański W, Dobrzyński G, Górecki A, Deszczyński J: ‘Feniks-modular hemi-endoprosthesis of the hip joint’, Arthroscopy Jt Surg., 2008, 4, (3), 5–12.
- Shareef N, Levine D: ‘Effect of manufacturing tolerances on the micromotion at the Morse taper interface in modular hip implants using the finite element technique’, Biomaterials, 1996, 17, 623–630.
- Tritschler B, Forest B, Rieu J: ‘Fretting corrosion of materials for orthopaedic implants: a study of a metal/polymer contact in an artificial physiological medium’, Tribol. Int., 1999, 32, 587–596.
- Fricker DC, Shivanath R: ‘Fretting corrosion studies of universal femoral head prostheses and cone taper spigots’, Biomaterials, 1990, 11, 495–500.
- Hiromoto S, Mischler S: ‘The influence of proteins on the fretting–corrosion behaviour of a Ti6Al4V alloy’, Wear, 2006, 261, 1002–1011.
- Duisabeau L, Combrade P, Forest B: ‘Environmental effect on fretting of metallic materials for orthopaedic implants’, Wear, 2004, 256, 805–816.
- Cho HJ, Wei WJ, Kao HC, Cheng CK: ‘Wear behavior of UHMWPE sliding on artificial hip arthroplasty materials’, Mater. Chem. Phys., 2004, 88, 9–16.
- Kop AM, Swarts E: ‘Corrosion of a hip stem with a modular neck taper junction’, J. Arthroplasty, 2009, 24, (7), 1019–1023.
- Lieberman JR, Rimnac CM, Garvin KL, Klein RW, Salvati EA: ‘An analysis of the head–neck taper interface in retrieved hip prostheses’, Clin. Orthop. Relat. Res., 1994, 300, 162–167.
- Hoeppner DW, Chandrasekaran V: ‘Fretting in orthopaedic implants: a review’, Wear, 1994, 173, 189–197.
- Geringer J, Forest B, Combrade P: ‘Fretting–corrosion of materials used as orthopedic implants’, Wear, 2005, 259, 943–951.
- Liu C, Bi Q, Matthews A: ‘Tribological and electrochemical performance of PVD TiN coatings on the femoral head of Ti–6Al–4V artificial hip joints’, Surf. Coat. Technol., 2003, 163–164, 597–604.
- Pulido M, Parrish A: ‘Metal-induced apoptosis: mechanisms’, Mutat. Res., 2003, 533, 227–241.
- de Boeck M, Kirsch-Volders M, Lison D: ‘Cobalt and antimony: genotoxicity and carcinogenicity’, Mutat. Res., 2003, 533, 135–152.
- Chandrasekaran V, Sauer WL, Taylor AM, Hoeppner DW: ‘Evaluation of fretting behavior of the proximal pad taper of a modular hip design’, Wear, 1999, 231, 54–64.
- McKellop HA, Sarmiento A, Brien W, Park SH: ‘Interface corrosion of a modular head total hip prosthesis’, J. Arthroplasty, 1992, 7, (3), 291–294.
- Yen SK, Guo MJ, Zan HZ: ‘Characterization of electrolytic ZrO2 coating on Co–Cr–Mo implant alloys of hip prosthesis’, Biomaterials, 2001, 22, 125–133.
- Mischler S: ‘Triboelectrochemical techniques and interpretation methods in tribocorrosion: a comparative evaluation’, Tribol. Int., 2008, 41, 573–583.
- Chu Y.-H, Elias J, Duda GN, Frassica FJ, Chao E: ‘Stress and micromotion in the taper lock joint of modular segmental bone replacement prosthesis’, J. Biomech., 2000, 33, (9), 1175–1179.
- Biegler FB, Reuben JD, Harrigan TP, Hou FJ, Akin JE: ‘Effects of porous coating and loading conditions on total hip femoral stem stability’, J. Arthroplasty, 1995, 10, (6), 839–847.
- Wang M.-Y, Flanagan SP, Song J, Greendale G, Salem G: ‘Relationships among body weight, joint moments generated during functional activities, and hip bone mass in older adults’, Clin. Biomech., 2006, 21, 717–725.
- Brand R, Pedersen D, Davy D, Kotzar G, Heiple K, Goldberg V: ‘Comparison of hip force calculations and measurements in the same patient’, J. Arthroplasty, 1994, 9, (1), 45–51.
- Stansfield BW, Nicol AC, Paul JP, Kelly IG, Graichen F, Bergmann G: ‘Direct comparison of calculated hip joint contact forces with those measured using instrumented implants. An evaluation of a three-dimensional mathematical model of lower limb’, J. Biomech., 2003, 36, 929–936.
- Bergmann G, Graichen F, Rohlmann A: ‘Hip joint loading during walking and running, measured in two patients’, J. Biomech., 1993, 26, (8), 969–990.
- Baleani M, Cristofolini L, Viceconti M: ‘Endurance testing of hip prostheses: a comparison between the load fixed in ISO 7206 standard and the physiological loads’, Clin. Biomech., 1999, 14, 339–345.
- Barril S, Debaud N, Mischler S, Landolt D: ‘A tribo-electrochemical apparatus for in vitro investigation of fretting–corrosion of metallic implant materials’, Wear, 2002, 252, 744–754.