References
- Okuda S, Dewa T and Sagawa T: ‘Development of 5W-30 GF-4 fuel-saving engine oil for DLC-coated valve lifters’, JSAE/SAE International Fuels and Lubricants Meeting, 2007, 1.
- Matta C, Joly-Pottuz L, de Barros Bouchet MI, Martin JM, Kano M, Zhang Q and Goddard WA III: ‘Superlubricity and tribochemistry of polyhydric alcohols’, Phys. Rev., 2008, 78, (8), 085436.
- Kalin M and Vizintin J: ‘A comparison of the tribological behavior of steel/steel, steel/DLC and DLC/DLC contacts when lubricated with mineral and biodegradable oils’, Wear, 2006, 261, 22–31.
- Kalin M and Vižintin J: ‘Real contact temperatures as the criteria for the reactivity of diamond-like-carbon coatings with oil additives’, Thin Sol. Fil., 2010, 518, 2029–2036.
- Vengudusamy B, Green JH, Lamb GD and Spikes HA: ‘Tribological properties of tribofilms formed from ZDDP in DLC/DLC and DLC/steel contacts’, Trib. Int., 2011, 44, 165–174.
- Topolovec-Miklozic K, Lockwood F and Spikes H: ‘Behaviour of boundary lubricating additives on DLC coatings’, Wear, 2008, 265, 1893–1901.
- Haque T, Morina A, Neville A, Kapadia R and Arrowsmith S: ‘Effect of oil additives on the durability of hydrogenated DLC coating under boundary lubrication conditions’, Wear, 2009, 266, 147–157.
- Neville A, Morina A, Haque T and Voong M: ‘Compatibility between tribological surfaces and lubricant additives—How friction and wear reduction can be controlled by surface/lube synergies’, Trib. Int., 2007, 40, 1680–1695.
- Kalin M and Velkavrh I: ‘Non-conventional inverse-stribeck-curve behaviour and other characteristics of DLC coatings in all lubrication regimes’, Wear, 2013, 297, 911.
- Ye J, Okamoto Y and Yasuda Y: ‘Direct insight into near-frictionless behavior displayed by diamond-like carbon coatings in lubricants’, Tribol. Lett., 2008, 29, 53.
- de Barros Bouchet MI, Matta C, le Mogne T, Martin JM, Zhang Q, Goddard WA III, Kano M, Mabuchi Y and Ye J: ‘Superlubricity mechanism of diamond-like carbon with glycerol. Coupling of experimental and simulation studies’, J. Phys.: Conf. Ser. 2007, 89, 012003.
- Yoshida K, Horiuchi T, Kano M and Kumagai M: ‘Effect of organic acid on friction and wear properties of DLC coating’, Tribol. Online, 2008, 3, (3), 200.
- Yoshida K, Horiuchi T, Kano M and Kumagai M: ‘Effect of a tribochemical reacted film on friction and wear properties of DLC coatings’, Plasma Process. Polym., 2009, 6, (0), S96.
- Kamiya M, Tanoue H, Takikawa H, Taki M, Hasegawa Y and Kumagai M: ‘Preparation of various DLC films by T-shaped filtered arc deposition and the effect of heat treatment on film properties’, Vacuum, 2009, 83, 510.
- Hamrock BJ and Dowson D: ‘Isothermal elastohydrodynamic lubrication of point contacts, part 2 - ellipticity parameter results’, ASME J. Lubr. Technol., 1976, 98, 375–383.
- Kalin M and Simic R: ‘Atomic force microscopy and tribology study of the adsorption of alcohols on diamond-like carbon coatings and steel’, Appl. Surf. Sci., 2013, 271, 317.