Oxidation of nickel-base welds 182 and 82 in simulated primary water of pressurised water reactors

References

• Couvant T and Vaillant F: ‘Initiation of PWSCC of weld Alloy 182’, Proc. 15th Int. Conf. on ‘Environmental degradation of materials in nuclear power systems – water reactors’, Colorado Springs, CO, USA, August 2011, TMS.
   Google Scholar
• Scott PM: ‘An overview of internal oxidation as a possible explanation of intergranular stress corrosion cracking of Alloy 600 in PWRs’, Proc. 9th Int. Conf. on ‘Environmental degradation of materials in nuclear power systems – water reactors’, Newport Beach, CA, USA, August 1999, NACE and ANS.
   Google Scholar
• Scott PM and Le Calvar M: ‘Some possible mechanisms of intergranular stress corrosion cracking of Alloy 600 in PWR primary water’, Proc. 10th Int. Conf. on ‘Environmental degradation of materials in nuclear power systems – water reactors’, San Diego, CA, USA, August 1993, TMS.
   Google Scholar
• Alexandreanu B and Was GS: ‘Grain boundary deformation-induced intergranular stress corrosion cracking of Ni–16Cr–9Fe in 360°C water’, Corrosion, 2003, 59, 705–720.
   Web of Science ®Google Scholar
• Bruemmer SM and Was GS: ‘Microstructural and microchemical mechanisms controlling intergranular stress-corrosion cracking in light-water reactors systems’, J. Nucl. Mater., 1994, 216, 348–363.
   Web of Science ®Google Scholar
• Couvant T, Legras L, Ghys T, Gambier P, Huin N and Ilevbare G: ‘Strain path effect on IGSCC initiation and oxidation of Alloy 182 exposed to PWR primary water’, Proc. 15th Int. Conf. on ‘Environmental degradation in nuclear power systems – water reactors’, Colorado Springs, CO, USA, August 2011, TMS.
   Google Scholar
• Hwang SS, Lim YS, Woo SW, Kim DJ and Kim HP: ‘Role of grain boundary carbides in cracking behavior of Ni base alloys’, Nucl. Eng. Technol., 2013, 45, 73–80.
   Web of Science ®Google Scholar
• Rebak RB, Xia Z and Szkalska-Smialowska Z: ‘Effects of carbides on susceptibility of Alloy 600 to stress corrosion cracking in high temperature water’, Corrosion, 1993, 49, 867–876.
   Web of Science ®Google Scholar
• Lim YS, Kim HP, Cho HDC and Lee HH: ‘Microscopic examination of an Alloy 600/182 weld’, Mater. Charact., 2009, 60, 1496–1506.
   Web of Science ®Google Scholar
• Sennour M, Chaumun E, Crépin J, Duhamel C, Gaslain F and Guerre C: ‘TEM investigations on the effect of chromium content and of stress relief treatment on precipitation in Alloy 82’, J. Nucl. Mater., 2013, 442, 262–269.
   Web of Science ®Google Scholar
• Panter J, Viguier B, Cloué JM, Foucault M, Combrade P and Andrieu E: ‘Influence of oxide films on primary water stress corrosion cracking initiation of Alloy 600’, J. Nucl. Mater., 2006, 348, 213–221.
   Web of Science ®Google Scholar
• Laghoutaris P: ‘Contribution to a model for stress corrosion cracking of Alloy 600 in PWR primary water’, EUROCORR, Nice, France, September 2009, NACE.
   Google Scholar
• Rebak RB and Szkalska-Smialowska Z: ‘The mechanism of stress corrosion cracking of Alloy 600 in high temperature water’, Corros. Sci., 1996, 38, 971–988.
   Web of Science ®Google Scholar
• Was GS and Lian K: ‘Role of carbides in stress corrosion cracking resistance of Alloy 600 and controlled-purity Ni–16% Cr–9% Fe in primary water at 360°C’, Corrosion, 1998, 54, 675–688.
   Web of Science ®Google Scholar
• Was GS, Sung JK and Angeliu TM: ‘Effects of grain boundary chemistry on the intergranular cracking behavior of Ni–16Cr–9Fe in high-temperature water’, Metall. Trans. A, 1992, 23A, 3343–3358.
   Google Scholar
• Laghoutaris P: ‘Corrosion Sous Contrainte de l'alliage 600 en milieu primaire des Réacteurs à Eau sous Pression: apport à la compréhension des mécanismes’, Thèse Ecole Nationale Supérieure des Mines de Paris, 2009.
   Google Scholar
• Calvarin G, Molins R and Huntz AM: ‘Oxidation mechanism of Ni–20Cr foils and its relation to the oxide-scale microstructure’, Oxid. Metals, 1999, 53, 25–47.
   Web of Science ®Google Scholar
• Sennour M, Marchetti L, Martin F, Perrin S, Molins R and Pijolat M: ‘A detailed TEM and SEM study of Ni-base alloys oxide scales formed in primary conditions of pressurized water reactor’, J. Nucl. Mater., 2010, 402, 147–156.
   Web of Science ®Google Scholar
• Jambon F, Marchetti L, Jomard F and Chêne J: ‘Characterization of oxygen and hydrogen migration through oxide scales formed on nickel-base alloys in PWR primary medium conditions’, Solid State Ionics, 2013, 231, 69–73.
   Web of Science ®Google Scholar
• Lozano-Perez S, Kruska K, Iyengar I, Terachi T and Yamada T: ‘The role of cold work and applied stress on surface oxidation of 304 stainless steel’, Corros. Sci., 2012, 56, 78–85.
   Web of Science ®Google Scholar