References
- Krauss G.: ‘Steels: heat treatment and processing principles’; 1989, OH, USA, ASM International.
- Moore C.: ‘Development of the BOC Ellenite process (cold treatment of metals with liquid nitrogen)’, ‘Heat Treatment 73’, London, Metals Society.
- Ai J.H., Zhao T.C., Gao H.J., Hu Y.H. and Xie X.S.: ‘Effect of controlled rolling and cooling on the microstructure and mechanical properties of 60Si2MnA spring steel rod’, J. Mater. Proc. Tech., 2005, 160, (3), 390–395.
- Fang X., Fan Z., Ralph B., Evans P. and Underhill R.: ‘Influence of accelerated cooling on microstructure and mechanical properties of C-Mn steels’, Mater. Sci. Tech., 2002, 18, (1), 47–53.
- Thompson M., Ferry M. and Manohar P.A.: ‘Simulation of hot-band microstructure of C-Mn steels during high speed cooling’, ISIJ Inter., 2001. 41, (8), 891–899.
- Rassizadehghani J., Raygan Sh. and Askari M.: ‘Comparison of the quenching capacities of hot salt and oil baths’, Met. Sci. Heat Treat., 2006, 48, (5–6), 193–198.
- Raygan S., Rassizadehghani J. and Askari M.: ‘Comparison of microstructure and surface properties of AISI 1045 steel after quenching in hot alkaline salt bath and oil’, J. Mater. Eng. Perform., 2009, 18, (2), 168–173.
- Budinski K.G.: ‘Engineering materials, properties and selection’; 1992, New Jersey, Prentice Hall.
- Roberts G. and Cary Robert R.: ‘Tool steels’; 1980, Ohio, ASM.
- Roberts G., Krauss G. and Kennedy R.: ‘Tool Steels’, 5th edn; 1998, Metals Park, OH, USA, ASM International.
- Thelning K.E.: ‘Steel and its heat treatment’, 2nd edn; 1984, Butterworths, London.
- Ha M.K., Kwaka J.S., Hwang Y.M. and Chung J.S.: ‘Machining characteristics of mold material in high-speed grinding’, J. Mater. Proc. Tech., 2004, 155–156, 1189–1195.
- Kopac J. and Krajnik P.: ‘High-performance grinding—a review’, J. Mater. Proc. Tech., 2006, 175, (1–3), 278–284.
- Kwak J.S.: ‘Application of Taguchi and response surface methodologies for geometric error in surface grinding process’, Int. J. Mach. Tool. Manufact., 2005, 45, (3), 327–334.
- Totten G.E., Bates C.E. and Clinton N.A.: ‘Handbook of quenchants and quenching technology’, Materials Park, OH, USA, 189–367; 1993, ASM Int.
- Metals Handbook: ‘Heat treating’, USA, Vol. 4, 87–90; 1991, ASM Int.