Synthesis of Cr₇C₃–CrB composite powders by powder immersion method

References

• P. Villars and L. D. Calvert: ‘Pearson's handbook of crystallographic data for intermetallic phases’, 1511; 1986, Metals Park, Ohio, American Society for Metals.
   Google Scholar
• A. Kagawa and Y. Ohta: ‘Wear resistance of laser clad chromium carbide surface layers’, Mater. Sci. Technol., 1995, 11, (5), 515–519. doi: 10.1179/mst.1995.11.5.515
   Web of Science ®Google Scholar
• R. Teghil, A. Santagata, A. De Bonis, A. Galasso and P. Villani: ‘Chromium carbide thin films deposited by ultra-short pulse laser deposition’, App. Surf. Sci., 2009, 255, (17), 7729–7733. doi: 10.1016/j.apsusc.2009.04.151
   Web of Science ®Google Scholar
• S. Sen, O. Ozdemir, A. S. Demirkıran and U. Sen: ‘Oxidation kinetics of chromium carbide coating produced on AISI 1040 steel by thermo-reactive deposition method during high temperature in air’, Adv. Mater. Res., 2012, 445, 649–654.
   Google Scholar
• S. Okada, K. Kudou, K. Iizumi, K. Kudaka, I. Higashi and T. Lundström: ‘Single-crystal growth and properties of CrB, Cr3B4, Cr2B3 and CrB2 from high-temperature aluminum solutions’, J. Cryst. Growth, 1996, 166, (1–4), 429–435. doi: 10.1016/0022-0248(95)00890-X
   Web of Science ®Google Scholar
• J. Matsushita, K. Shimao, Y. Machida, T. Takao, K. Iizumi, Y. Sawada and K. B. Shim: ‘Sintering and mechanical properties of chromium boride-chromium carbide composites’, Mater. Sci. Forum, 2007, 53, (4–536), 1077–1080. doi: 10.4028/www.scientific.net/MSF.534-536.1077
   Google Scholar
• S. Zhu, W. G. Fahrenholtz and G. E. Hilmas: ‘Influence of silicon carbide particle size on the microstructure and mechanical properties of zirconium diboride-silicon carbide ceramics’, J. Eur. Ceram. Soc., 2007, 27, (4), 2077–2083. doi: 10.1016/j.jeurceramsoc.2006.07.003
   Web of Science ®Google Scholar
• D. S. Wilkinson: ‘Creep mechanisms in multiphase ceramic materials’, J. Am. Ceram. Soc., 1998, 81, (2), 275–299. doi: 10.1111/j.1151-2916.1998.tb02333.x
   Web of Science ®Google Scholar
• S. Q. Guo: ‘Densification of ZrB2-based composites and their mechanical and physical properties: a review’, J. Eur. Ceram. Soc., 2009, 29, (6), 995–1011. doi: 10.1016/j.jeurceramsoc.2008.11.008
   Web of Science ®Google Scholar
• A. Upadhyaya and G. S. Upadhyaya: ‘Sintering of copper-alumina composites through blending and mechanical alloying powder metallurgy routes’, Mater. Des., 1995, 16, (1), 41–45. doi: 10.1016/0261-3069(95)00006-K
   Web of Science ®Google Scholar
• M. Chmielewski, K. Pietrzak and W. Włosiński: ‘Properties of sintered Al2O3–Cr composites depending on the method of preparation of the powder mixture’, Sci. Sinter., 2006, 38, (3), 231–238. doi: 10.2298/SOS0603231C
   Web of Science ®Google Scholar
• E. Y. Gutmanas, I. Gotman and W. Kaysser: ‘Coating of non-oxide ceramics by interaction with metal powders’, Mater. Sci. Eng. A, 1992, 157, (2), 233–241. doi: 10.1016/0921-5093(92)90030-5
   Web of Science ®Google Scholar
• P. Mogilevsky, E. Y. Gutmanas, I. Gotman and R. Telle: ‘Reactive formation of coatings at boron carbide interface with Ti and Cr powders’, J. Eur. Ceram. Soc., 1995, 15, (6), 527–535. doi: 10.1016/0955-2219(95)00014-L
   Web of Science ®Google Scholar
• S. Anthonysamy, K. Ananthasivan, I. Kaliappan, V. Chandramouli, P. R. Vasudevarao, C. K. Mathews and K. T. Jacob: ‘Gibbs energies of formation of chromium carbides’, Metall. Mater. Trans. A, 1996, 27, (7), 1919–1924. doi: 10.1007/BF02651941
   Web of Science ®Google Scholar
• K. Hirota, K. Mitani, M. Yoshinaka and O. Yamaguchi: ‘Simultaneous synthesis and consolidation of chromium carbides (Cr3C2, Cr7C3 and Cr23C6) by pulsed electric-current pressure sintering’, Mater. Sci. Eng. A, 2005, 399, (1–2), 154–160. doi: 10.1016/j.msea.2005.02.062
   Web of Science ®Google Scholar
• S. J. Wu and E. Y. Gutmanas: ‘Preparation of chrome carbide coatings on T P24 by PIRAC’, Adv. Mater. Res., 2012, 45, (2–453), 77–80.
   Google Scholar
• H. Nishikawa: ‘Powder or boron compound at present’, Ceramics, 1987, 22, (1), 40–45.
   Google Scholar
• Semitracks. Available at: http://www.semitracks.com/index.php/zh/reference–material/failure–and–yield–analysis/materials–characterization/eds.
   Google Scholar
• Available at: http://micron.ucr.edu/public/manuals/EDS–intro.pdf.
   Google Scholar