References
- A. M. Troschinetz and J. R. Mihelcic: ‘Sustainable recycling of municipal solid waste in developing countries’, Waste Manag., 2008, 29, 915–923.
- S. Kumar, J. K. Bhattacharyya, A. N. Vaidya, T. Chakrabarti, S. Devotta and A. B. Akolkar: Assessment of the status of municipal solid waste management in metro cities, state capitals, class I cities, and class II towns in India: an insight', Waste Manag., 2009, 29, 883–895.
- C. E. Munoz-Cadena, F. J. Arenas-Huertero and E. Ramón-Gallegos: ‘Comparative analysis of the street generation of inorganic urban solid waste (IUSW) in two neighborhoods of Mexico City’, Waste Manag., 2009, 29, 1167–1175.
- L. Chacón: ‘Materiales compuestos de Matriz Polimèrica’. Escuela de Ingenieria Metalùrgica y Ciencia de los Materiales, Facultad de Ingenieria, Universidad Central de Venezuela, 2008, Venezuela.
- Instituto Nacional de Estadisticas - INE: ‘Sintesis de estadistica estadal’, 2010. Available at: http://www.ine.gob.ve/documentos/see/sintesisestadistica2010/estados/miranda/index.htm (accessed 29 August 2011).
- M. Ashby and D. Jones: ‘Engineering materials 2. An introduction to microstructures, processing and design’, 2nd edn., 1998, Oxford, Butterworth-Heinemann.
- G. Gómez, M. Meneses, L. Ballinas and F. Castells: ‘Seasonal characterization of municipal solid waste (MSW) in the city of Chihuahua, Mexico’, Waste Manag., 2009, 29, 2018–2024.
- M. Kirwan ‘in Paper and paperboard packaging technology’, (ed.), 2005, Hoboken, NJ, Blackwell Publishing Ltd.
- D. Hull and T. W. Clyne: ‘An Introduction to composite materials’ 2 edn., 1996, Cambridge, Cambridge University Press.
- Y. Nakamura, M. Yamaguchi, M. Okubo and T. Matsumoto: ‘Effect of particle size on mechanical properties of epoxy resin filled with angular-shaped silica’, J. Appi. Polym. Sci, 1992, 44, 151–158.
- M. A. Khatwa, H. G. Salem and S. M. Haggar: ‘Building materials from waste’, Can. Metal. Quat., 2005, 44, (3), 339–350.
- M. Bengtsson, P. Gatenholm and K. Oksman: ‘The effect of crosslinking on the properties of polyethylene/wood flour composites’, Compos. Sci Technol., 2005, 65, 1468–1479.
- D. De Lima, J. Da Silveira, R. R. Campomanes, R. M. Campomanes, S. Caldeira and V. Hardt: ‘Evaluation of physical and mechanical performance of wood plastic obtained from solid waste of polypropylene and wood powder from centerwest region of Brazil', Memorias del 5th Congreso Interamericano de Residuos Sólidos, Lima-Perù; 2013.
- M. Ichazo, C. Albano, J. Gonzalez, R. Perera and M. Candal: ‘Polypropylene/wood flour composites: treatments and properties', Compos. Struct., 2001, 54, 207–214.
- B. Kokta, R. G. Raj and C. Daneault: ‘Use of Wood Flour as Filler in Polypropylene: Studies on Mechanical Properties‘, Polym. Plast. Technol., 1989, 28, (3), 247–259.
- D. Bigg: ‘Mechanical properties of particulate filled polymers', Polym. Compos., 1987, 8, (2), 115–122.
- S. Fu, X. Feng, B. Lauke and Y. Mai: ‘Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate-polymer composites’, Compos. B, 2008, 39, 933–961.
- D. Bigg: ‘Mechanical property enhancement of semicrystalline polymers—A review’, Polym. Eng. Sci., 1988, 28, (13), 830–841.
- F. La Mantia and M. Morreale: ‘Green composites: A brief review', Compos. A, 2011, 42, (6), 579–588