References
- Chang S. H., Tang T. P. and Huang K. T.: ‘Improvement of aluminum erosion behavior and corrosion resistance of AISI H13 tool steel by oxidation treatment,’ ISIJ Int., 2010, 50, (4), 569–573. doi: 10.2355/isijinternational.50.569
- M. Koneshlou, K. M. Asl and F. Khomamizadeh: ‘Effect of cryogenic treatment on microstructure, mechanical and wear behaviors of AISI H13 hot work tool steel,’ Cryogenics, 2011, 51, (1), 55–61. doi: 10.1016/j.cryogenics.2010.11.001
- Medvedeva A., Bergströb J., Gunnarssona S. and Andersson J.: ‘High-temperature properties and microstructural stability of hot-work tool steels,’ Mater. Sci. Eng. A, 2009, 523, (1), 39–46. doi: 10.1016/j.msea.2009.06.010
- Ma D. S., Zhou J., Chen Z. Z., Zhang Z. K., Chen Q. A. and Li D. H.: ‘Influence of thermal homogenization treatment on structure and impact toughness of H13 ESR steel,’ J. Iron Steel Res. Int., 2009, 16, (5), 56–60. doi: 10.1016/S1006-706X(10)60011-8
- Tekmen C., Toparli M., Ozdemir I., Kusoglu I. M. and Onel K.: ‘High temperature behaviour of H13 steel,’ Zeitschrift für Metallkunde, 2005, 96, (12), 1431–1433. doi: 10.3139/146.101196
- Hu X. B., Li L., Wu X. C. and Zhang M.: ‘Coarsening behavior of M23C6 carbides after ageing or thermal fatigue in AISI H13 steel with niobium,’ Int. J. Fatigue, 2006, 28, (3), 175–182. doi: 10.1016/j.ijfatigue.2005.06.042
- Kheirandish S. and Noorian A.: ‘Effect of niobium on microstructure of cast AISI H13 hot work tool steel,’ Iron Steel Res. Int., 2008, 15, (4), 61–66. doi: 10.1016/S1006-706X(08)60145-4
- Bor H. Y., Cao C. G. and Ma C. Y.: ‘The influence of magnesium on carbide characteristics and creep behavior of the Mar-M247 superalloy,’ Scr. Mater., 1997, 38, (2), 329–335. doi: 10.1016/S1359-6462(97)00444-2
- Bor H. Y., Cao C. G. and Ma C. Y.: ‘The effects of Mg microaddition on the mechanical behavior and fracture mechanism of MAR-M247 superalloy at elevated temperatures,’ Metall. Mater. Trans. A, 1999, 30, (3), 551–561. doi: 10.1007/s11661-999-0047-3
- Yang J., Okumura K., Kuwabara M. and Sano M.: ‘Behavior of magnesium in the desulfurization process of molten iron with magnesium vapor produced in-situ by aluminothermic reduction of magnesium oxide,’ ISIJ Int., 2002, 42, (7), 685–693. doi: 10.2355/isijinternational.42.685
- Chai F., Yang C., Su H., Zhang Y. Q. and Xu Z.: ‘Effect of magnesium on inclusion formation in Ti-killed steels and microstructural evolution in welding induced coarse-grained heat affected zone,’ J. Iron Steel Res. Int., 2009, 16, (1), 69–74. doi: 10.1016/S1006-706X(09)60013-3
- Narayanan B. K.: ‘Effect of alloying on microstructure and precipitate evolution in ferritic weld metal’, ‘ PhD thesis, The Ohio State University, Columbus, OH, 2009.
- Yin H., Shibata H., Emi T. and Suzuki M.: ‘“In-situ’ observation of collision, agglomeration and cluster formation of alumina inclusion particles on steel melts,’ ISIJ Int., 1997, 37, (10), 936–945. doi: 10.2355/isijinternational.37.936
- Kimura S., Nabeshima Y., Nakajima K. and Mizoguchi S.: ‘Behavior of nonmetallic inclusions in front of the solid-liquid interface in low-carbon steels,’ Metall. Mater. Trans. B, 2000, 31, (5), 1013–1021. doi: 10.1007/s11663-000-0077-0
- Turnbull D. and Vonnegut B.: ‘Nucleation catalysis,’ Ind. Eng. Chem., 1952, 44, (6), 1292–1298. doi: 10.1021/ie50510a031
- Bramfitt B. L.: ‘The effect of carbide and nitride additions on the heterogeneous nucleation behavior of liquid iron,’ Metall. Trans., 1970, 1, (7), 1987–1995. doi: 10.1007/BF02642799