References
- Krause B., Storr M., Ertl T., Buck R., Hildwein H., Deppisch R. and Göhl H.: Chem. Ing. Tech., 2003, 75, 1725–1732.
- Cassidy P. E. and Aminabhavi T. M.: Rubber Chem. Technol., 1983, 56, 594–618.
- Harogoppad S. B. and Aminabhavi T. M.: Macromolecules, 1991, 24, 2598–2605.
- Khinnavar R. D. and Aminabhavi T. M.: J. Appl. Polym. Sci., 1991, 42, 2321–2328.
- Proikakis C. S., Mamouzelos N. J., Tarantili P. A. and Andreopoulos A. G.: Polym. Degrad. Stab., 2006, 91, 614–619.
- Gopakumar S. and Gopinathan Nair M. R.: Polymer, 2005, 46, 10419–10430.
- Azaar K., Rosca I. D. and Vergnaud J. M.: Polymer, 2002, 43, 4261–4267.
- Kader M. A. and Bhowmick A. K.: Polym. Degrad. Stab., 2003, 79, 283–295.
- Mathai E., Singh R. P. and Thomas S.: J. Membr. Sci., 2002, 202, 35–54.
- El-Tantawy F.: Polym. Degrad. Stab., 2001, 73, 289–299.
- Erdal S., Bahar I. and Erman B.: Polymer, 1998, 39, (10), 2035–2041.
- Sen Majumder P., Majali A. B., Tikku V. K. and Bhowmick A. K.: J. Appl. Polym. Sci., 2000, 75, 784–795.
- Tung T. T., Castro M., Kim T. Y., Suh K. S. and Feller J. F.: J. Mater. Chem., 2012, 22, 21754–21766.
- Kumar B., Castro M. and Feller J. F.: Chem. Sens., 2013, 3, (20), 1–7.
- Chatterjee S., Castro M. and Feller J. F.: J. Mater. Chem. B, 2013, 1, (36), 4563–4575.
- Kumar S. K., Castro M., Pillin I., Feller J. F., Thomas S. and Grohens Y.: Polym. Adv. Technol., 2013, 24, (5), 487–494.
- Gorrasi G., Tortora M., Vittoria V., Pollet E., Lepoittevin B., Alexandre M. and Dubois P.: Polymer, 2003, 44, 2271–2279.
- Gain O., Espuche E., Pollet E., Alexandre M. and Dubois P.: J. Polym. Sci. B, 2005, 43, 205–214.
- Yang Y. H., Bolling L., Priolo M. A. and Grunlan J. C.: Adv. Mater., 2013, 25, 503–508.
- Stevens B., Dessiatova E., Austin Hagen D., Todd A. D., Bielawski C. W. and Grunlan J. C.: ACS Appl. Mater. Interf., 2014, 5, (13), 9942–9945.
- Usuki A., Kojima Y., Okada A. and Kamigaito O.: J. Mater. Res., 1993, 8, 1185–1189.
- Lan T. and Pinnavaia T. J.: Chem. Mater., 1994, 6, 2216–2219.
- Sadhu S. and Bhowmick A. K.: J. Polym. Sci. B, 2004, 42, 1573–1585.
- Tong X., Zhaw H., Tang T., Feng Z. and Huang B.: J. Polym. Sci. A, 2002, 40, 1706–1711.
- Messermith P. B. and Giannelis E. P.: J. Polym. Sci. A, 1995, 33, 1047–1057.
- Gorrasia G., Tortoraa M., Vittoriaa V., Polletb E., Lepoittevinb B., Alexandreb M. and Dubois P.: Polymer, 2003, 44, 2271–2279.
- Van Olphen H.: ‘An introduction to clay colloid chemistry’, 2nd edn; 1977, New York, J. Wiley & Sons.
- Le Baron P., Wang Z. and Pinnavaia T.: Appl. Clay Sci., 1999, 15, 11–29.
- Vaia R. A., Price G., Ruth P. N., Nguyen H. T. and Lichtenhan J.: Appl. Clay Sci., 1999, 15, 67–92.
- Saritha A., Joseph K., Thomas S. and Muraleekrishnan R.: Compos. A, 2012, 43, 864–870.
- Makoto K., Azusa T., Hiromitsu T., Amritsu U. and Isamu I.: J. Polym. Sci. A, 2006, 44, 1182–1188.
- Salahuddin N. and Akelah A.: Polym. Adv. Technol., 2002, 13, 339–345.
- Li X. C. and Ha C. S.: J. Appl. Polym. Sci., 2003, 87, (12), 1901–1909.
- Chen D., Tang L. and Li J.: J. Chem. Soc. Rev., 2010, 39, 3157–3180.
- Huiqin L., Shuxin L., Kelong L., Liangrui X., Kuisheng W. and Wenli G.: Polym. Eng. Sci., 2011, 51, (11), 2254–2260.
- Song S. H., Jeong H. K. and Kang Y. G.: J. Ind. Eng. Chem., 2010, 16, 1059–1065.
- Prud'Homme R., Ozbas B., Aksay I., Register R. and Douglas A.: US patent, 7,745,528 B2; 2010.
- Xin B., Chaoying W., Yong Z. and Yinghao Z.: Carbon, 2011, 49, 1608–1613.
- Kim H., Abdala A. A. and Macosko C. W.: Macromolecules, 2010, 43, 6515–6530.
- Geim A. K. and Novoselov K. S.: Nat. Mater., 2007, 6, 183–191.
- Rafiee M. A., Rafiee J., Wang Z., Song H., Yu Z. Z. and Koratkar N.: ACS Nano, 2009, 3, 3884–3890.
- Rogers C. E.: Permeation of gases and vapours in polymers, In: ‘Polymer permeability’, (ed. Comyn J.); 1986, London, Elsevier applied science, pp. 11–74.
- Michaels A. S., Vieth W. R. and Barrie J. A.: J. Appl. Phys., 1963, 34, (1), 13–20.
- Aris R.: Arch. Ration Mech. Anal., 1986, 95, 83–91.
- Chen C., Han B., Li J., Shang T., Zou J. and Jiang W.: J. Membr. Sci., 2001, 187, 109–118.
- Fredrickson G. H. and Bicerano J.: J. Chem. Phys., 1999, 110, 2181–2188.
- Cussler E. L., Hughes W. J., W. J. Ward III and Aris R.: J. Membr. Sci., 1988, 38, (2), 161–174.
- Bharadwaj R. K.: Macromolecule, 2001, 34, 9189–9192.
- Linossier I., Gaillard F., Romand M. and Feller J. F.: J. Appl. Polym. Sci., 1997, 66, 2465–2473.
- Feller J. F., Guézénoc H., Bellégou H. and Grohens Y.: ‘Smart poly(styrene)/carbon black conductive polymer composites films for styrene vapour sensing’, Macromol. Symp., 2005, 222, 273–280.
- Lu J., Kumar B., Castro M. and Feller J. F.: Sens. Actua. B, 2009, 140, 451–460.
- Kumar B., Feller J. F., Castro M. and Lu J.: Talanta, 2010, 81, 908–915.
- Lu J., Feller J. F., Kumar B., Castro M., Kim Y. S., Park Y. T. and Grunlan J. C.: Sens. Actua. B, 2011, 155, 28–36.
- Nag S., Duarte L., Bertrand E., Celton V., Castro M., Choudhary V., Guegan P. and Feller J. F.: J. Mater. Chem. B., 2014, 2, 6571–6579.
- Feller J. F., Gatt N., Kumar B. and Castro M.: Chemosensors., 2014, 2, 26–40.
- Castro M., Lu J., Bruzaud S., Kumar B. and Feller J. F.: Carbon, 2009, 47, 1930–1942.
- Edwards P., Gray H., Lodge M. and Williams R.: Angew. Chem. Int. Ed., 2008, 47, 6758–6765.
- Ezquerra T. A., Kulescza M., Cruz C. S. and Balt-Calleja F. J.: Adv. Mater., 1990, 2, 597–600.
- Daniela C. M., Dmitry V. K., Jacob M. B., Alexander S., Zhengzong S., Alexander S., Lawrence B. A., Wei L. and James M. T.: ACS Nano, 2010, 4, (8), 4806–4814.
- Crank J.: ‘The mathematics of diffusion’, 2nd edn; 1975, Oxford, Clarendon Press.
- Fick A.: Ann. Phys. Lpz., 1855, 170, 59–86.
- Carslaw H. S.: 1st edn; 1906, London, Macmillan.