Overview of Rapid Solidification Technology

REFERENCES

• Proc. Int. Conf. on Metastable Metallic Alloys, Brela Yugoslavia (1980).
   Google Scholar
• B. C. Giessen and N. J. Grant, Eds, Proc. Second Int. Conf. on Rapidly Quenched Metals, Cambridge MA. MIT Press, Cambridge, MA (1976).
   Google Scholar
• B. Cantor, ed., Proc. Third Int. Conf. on Rapidly Quenched Metals III, Brighton, July 3-7, 1978. Metals Society,London (1978).
   Google Scholar
• T. Matsumoto and K. Suzuki, Eds, Proc. Fourth Int. Conf. on Rapidly Quenched Metals, Sendal, Japan, Japan Institute of Metals, Sendai, Japan (1982).
   Google Scholar
• S. Steeb and H. Warlimont, Eds, Proc. Fifth Int. Conf. on Rapidly Quenched Metals, Wurzburg, Germany. North Holland Physics, Amsterdam (1985).
   Google Scholar
• R. Mehrabian et al., ed., Rapid Solidification Processing: Principles and Technologies. Claitor's Publishing Division, Baton Rouge, LA(1978).
   Google Scholar
• R. Mehrabian etal., ed., Rapid Solidification Processing: Principles and Technologies II. Claitor's Publishing Division, Baton Rouge, LA(1980).
   Google Scholar
• R. Mehrabian, ed., Rapid Solidification Processing: Principles and Technologies III. National Bur. Stds, Gaithersburg MD(1982).
   Google Scholar
• W. W. Mullins and R. F. Sekerka, J. Appl. Phys. 35, 444 (1964).
   Web of Science ®Google Scholar
• W. E. Brower, R. Strachan and M. C. Flemings, Cast Metals. Res. J. 6, 1976 (1970).
   Google Scholar
• H. Jones, Rapid Solidification of Metals and Alloys. Institution of Metallurgists,London (1982).
   Google Scholar
• V. K. Sarin and N. J. Grant, Metall. Trans. 3, 875 (1972).
   Web of Science ®Google Scholar
• S. J. Savage and F. H. Froes, J.Metals 36 (4), 20 (1984).
   Google Scholar
• H. Jones, Ultrarapid Quenching of Liquid Alloys, Treatise on Materials Science and Technology,Vol. 20, P. J. Academic Press,New York (1981).
   Google Scholar
• A. Lawley, Int. J. Powder Met. Powder Technol. 13, 169 (1977).
   Web of Science ®Google Scholar
• N. J. Grant, J.Metals35 (1), 20 (1983).
   Google Scholar
• A. R. Cox, J. B. Moore and E. C. Van Reuth, Proc. Third Int. Symp. on Superalloys, Seven Springs, PA,p.45 Claitor's Publishing Division, Baton Rouge LA (1976).
   Google Scholar
• A. R. E. Singer, Powder Metallurgy 25, 195 (1982).
   Web of Science ®Google Scholar
• R. W. Jech, T. J. Moore, T. K. Glasgow and N. W. Orth, J.Metals 36 (4), 41 (1984).
   Google Scholar
• H. H. Liebermann, Mater. Sci. Engng 43, 203 (1980).
   Web of Science ®Google Scholar
• M. C. Narashimhan, Continuous casting method for metallic amorphous strips, Allied Chemical Corp., Morristown, NJ., U.S. Patent No. 4,221,257 (Sept. 9, 1980).
   Google Scholar
• M. C. Narashimhan, Continuous casting method and apparatus for structurally defined metallic strips, Allied Chemical Corp., Morristown, NJ., U.S. Patent No. 4,212,343 (July 15, 1980).
   Google Scholar
• H. Fiedler, H. Muhlback and G. Stephani, J. Mater. Sci. 19, 3229 (1984).
   Web of Science ®Google Scholar
• J. Hubert, F. Mollard and B. Lux, Z. Metallk. 64, 835 (1973).
   Google Scholar
• R. E. Maringer and C. E. Mobley, as in [3], p. 49.
   Google Scholar
• J. Ishihara and I. Ikuta, as in [4], p. 19.
   Google Scholar
• E. A. Starke, T. H. Saunders and I. G. Palmer, J.Metals33 (8), 24 (1981).
   Google Scholar
• K. K. Sankaran and N. J. Grant, Mater. Sci. Engng. 44, 213 (1980).
   Web of Science ®Google Scholar
• R. R. Irving, Iron Age226 (14), 47 (1983).
   Google Scholar
• F. H. Froes and J. R. Pickens, J.Metals36 (1), 14 (1984).
   Google Scholar
• T. E. Tietz and I. G. Palmer, Advances in Powder Technology edited by G. Y. Chin,p. 189. American Society for Metals, Metals Park, Ohio(1982).
   Google Scholar
• P. P. Millan, J.Metals35 (3), 76 (1983).
   Google Scholar
• L. Christodoulou, J. R. Gordon and J. R. Pickens, to be published in Metall. Trans.
   Google Scholar
• S. Ashley, Am. Metal Market Metalworking News90 (100), 9 (1982).
   Google Scholar
• M. Toaze, presented at the TMS-AIME Fall Meeting, Oct. 2-6, 1983, Philadelphia, PA.
   Google Scholar
• Anon., P/M Technology Newsletter 14, 1 (1985).
   Google Scholar
• C. W. Draper, J. Mater. Sci. 16, 2774 (1981).
   Web of Science ®Google Scholar
• J. Javadpour, C. R. Clayton and C. W. Draper, Corrosion of Metals Processed by Directed Energy Beams (edited by C. R. Clayton and C. M. Preece) p. 135. TMS-AIME,New York (1982).
   Google Scholar
• M. W. Gabriel, C. M. Preece, A. Staudinger and C. W. Draper, IEEE J. Quantum Elect. 17, 2000 (1981).
   Web of Science ®Google Scholar
• C. W. Draper and S. P. Sharma, Thin Solid Films 84, 333 (1981).
   Web of Science ®Google Scholar
• Anon., INCRA Status Report, p. 11. (November 1, 1984).
   Google Scholar
• Y. Nishi, H. Aoyagi, K. Suzuki and E. Yajima, as in [4], p. 1585.
   Google Scholar
• Y. Nishi, H. Aoyagi, T. Suzuki and E. Yajima, as in [4], p. 1597.
   Google Scholar
• J. V. Wood and P. H. Shingu, Metall. Trans. 15A, 471 (1984).
   Web of Science ®Google Scholar
• J. V. Wood, A. Crossly and W. M. Stobbs, as in [3], p. 180.
   Google Scholar
• J. V. Wood and R. W. K. Honeycombe, Treatise on Materials Science and Technology: Ultrarapid Quenching of Liquid Alloys,Vol. 30, p. 117 (1981).
   Google Scholar
• R. V. Raman and R. E. Maringer, Proc. Conf : Physics of the SteelIndustry, Bethlehem, PA, Oct. 5-7,1981, p. 310. American Institute of Physics,(1982).
   Google Scholar
• K. Talcigawa, H. Manto, N. Kawai and K. Homma, Powder Metall. 24, 196 (1981).
   Web of Science ®Google Scholar
• Anon., Metal Powder Report 38, 475 (1983).
   Google Scholar
• T. Tsuru and R. M. Latanision, J. electrochem. Soc. 129, 1402 (1982).
   Web of Science ®Google Scholar
• R. M. Latanision, A. Saito, R. Sandenbergh and S.-X. Zhang, Proc. Symp. on Chemistry of Rapidly Solidified Materials, TMS-AIME, St Louis, MO (1983), to be published.
   Google Scholar
• G. J. Yurek, D. Eisen and A. Garrett-Reed, Metall. Trans. 13A, 473 (1982).
   Web of Science ®Google Scholar
• G. B. Olsen, M. Cohen and G. J. Yurek, Proc. Third Conf. on Rapid Solidification Processing: Principles and Technologies (edited by R. Mehrabian), p.171 National Bureau of Standards, Gaitherburg, MD (1982).
   Google Scholar
• A. N. Pate, L. F. Vassamillet and A. H. Clauer, Rapidly Solidified Amorphous and Crystalline Alloys (edited by B. H. Kear et al.), p.259 Elsevier, NY (1982).
   Google Scholar
• E. R. Slaughter and S. K. Das, Rapid Solidification Processing: Principles and Technologies II (edited by R. Mehrabian et al.),p.273 Claitor's Publishing Division, Baton Rouge, LA (1980).
   Google Scholar
• Y. Zhang, F. Dabkowski, S. Kang and N. J. Grant, Powder Metall. Int. 17, 17 (1985).
   Web of Science ®Google Scholar
• Y. Zhang, F. Dabkowski and N. J. Grant, Mater. Sci. Eng. 65, 265 (1984).
   Google Scholar
• D. Imeson, J. V. Vander Sande, N. J. Grant and O. K. Harling, J. nucl. Metals 122, 123, 266 (1984).
   Web of Science ®Google Scholar
• C. H. Chen, C. J. Alstetter and H. M. Rigsbee, Metall. Trans. 15A, 719 (1984).
   Web of Science ®Google Scholar
• E. Ramous and R. Menin, as in [4], p. 189.
   Google Scholar
• B. L. Mordike and H. W. Bergmann, as in [4], p. 197.
   Google Scholar
• P. R. Strutt, M. Kurup and D. A. Gilbert, as in [7], p. 225.
   Google Scholar
• A. W. Ruff and L. K. Ives, Int. Conf. on Wear of Materials, San Francisco, CA, March 30-April 1,1981, p. 326. ASME New York, NY.
   Google Scholar
• J. E. Smugeresky and R. M. German, Int. J. of Powder Metallurgy and Powder Technology 17, 305 (1981).
   Web of Science ®Google Scholar
• O. A. Ruano, L. E. Eiselstein and O. D. Sherby, Metall. Trans. 13A, 1785 (1982).
   Web of Science ®Google Scholar
• N. Tsuya and K. I. Arai, Solid State Phys. 13, 237 (1978).
   Google Scholar
• N. Tsuya, K. I. Arai, K. Ohmori and T. Hamma, J. appl. Phys. 53, 2422 (1982).
   Web of Science ®Google Scholar
• R. J. Patterson, A. R. Cox and E. C. Van Reuth, J. Metals 39, 34 (1980).
   Google Scholar
• R. E. Anderson, A. R. Cox, T. D. Tillman and E. C. Van Reuth, as in [7], p. 416.
   Google Scholar
• R. H. VanStone and R. P. Gangloff, as in [7], p. 317.
   Google Scholar
• Anon., Metal Powder Report 38, 837 (1983).
   Google Scholar
• Anon., 71n and Its Uses 141, 8 (1984).
   Google Scholar
• S. M. L. Sastry, P. J. Meschter and J. E.. O'Neal, Metall. Trans. 15A, 1451 (1984).
   Web of Science ®Google Scholar
• S. M. L. Sastry, T. C. Peng and L. P. Beckerman, Metall. Trans. 15A, 1465 (1984).
   Web of Science ®Google Scholar
• S. Krishnamurthy, R. G. Vogt, D. Eylon and F. H. Froes, Developments in titanium powder metallurgy. Presented at the MPIF/APMI Annual Powder Metallurgy Conference, May 1-4, 1983, New Orleans, Louisiana, to be published.
   Google Scholar
• R. W. Cahn, Contemporary Phys. 21, 43 (1980).
   Web of Science ®Google Scholar
• J. J. Gilman and H. J. Leamy, Eds, Metallic Glasses. American Society for Metals, Metals Park, Ohio (1978).
   Google Scholar
• J. C. M. Li, as in [46], p. 43.
   Google Scholar
• A. L. Mulder, J. W. Drijver and S. Radelaar, as in [4], p. 1361.
   Google Scholar
• M. Doi, K. Sugiyama, T. Tono and T. Imura, as in [4], p. 1349.
   Google Scholar
• S. H. Whang and B. C. Giessen, as in [4], p. 1403.
   Google Scholar
• S. H. Whang and B. C. Giessen, Rapidly Quenched Amorphous and Crystalline Alloys (edited by B. H. Kear), p. 301 (1982).
   Google Scholar
• R. Becker and G. Sepold, ibid. p. 295.
   Google Scholar
• R. Moreton and J. K. Lancaster, J. Mater. Sci. Lett. 4, 133 (1985).
   Google Scholar
• J. J. Gilman, J.Physique 41, Colloque C8, Suppl. 8, C8-811(1980).
   Google Scholar
• L. E. Tanner, Scripta Metall. 12, 114 (1978).
   Google Scholar
• N. J. Grant (MIT), Private communication.
   Google Scholar
• N. DeCristofaro and C. Henschel, Welding J. 57, 33 (1978).
   Google Scholar
• K. Hashimoto and T. Masumoto, as in [37], p. 291.
   Google Scholar
• A. J. Maeland, Hydrides for Energy Storage (edited by A. F. Anderson and A. J. Maeland), p. 447. Pergamon, Oxford(1978).
   Google Scholar
• A. J. Maeland, L. E. Tanner and G. G. Libowitz, J. Less-Common Metals 74, 279 (1980).
   Google Scholar
• E. Spit et al., as in [4],p. 1635.
   Google Scholar
• K. Aoki, A. Horata and T. Masumoto, as in [4], p. 1649.
   Google Scholar
• K. Aoki, A. Horata and T. Masumoto, Sci. Rep. RI TU (A) 29,218 (1981).
   Web of Science ®Google Scholar
• A. Kawashima and K. Hashimoto, as in [4], p. 1427.
   Google Scholar
• M. Hara, K. Hashimoto and T. Masumoto, as in [4], p. 1423.
   Google Scholar
• T. Masumoto and T. Egami, Mater. Sci. Engng 48, 147 (1981).
   Web of Science ®Google Scholar
• C. D. Graham and T. Egami, Ann. Rev. Mater. Sci. 8, 423 (1978).
   Web of Science ®Google Scholar
• J. J. Gilman, Metal Prog.120 (8), 42 (1979).
   Google Scholar
• H. S. Chen, H. J. Leamy and C. E. Miller, Ann. Rev. Mater. Sci. 10, 363 (1980).
   Web of Science ®Google Scholar
• F. E. Luborsky and L. A. Johnson, J.Physique 41, Colloque C8, Suppl. 8, C8-820 (1980).
   Google Scholar
• K. I. Arai and N. Tsuya, J. appl. Phys. 49, 1718 (1978).
   Web of Science ®Google Scholar
• M. Kikuchi, K. Fukamichi and T. Masumoto, Sci. Rep. RITU (A)
   Google Scholar
• J. P. Dismukes and G. J. Sellars, as in [3], Vol. 2, p. 205.
   Google Scholar
• J. J. Gilman, Physics Today 28 (5), 46 (1975).
   Google Scholar
• H. Heinrich, T. Haag and G. Geiger, J. Phys. D: Appl. Phys. 11, 2439 (1978).
   Google Scholar
• A. Inoue and T. Masumoto, Sci. Rep. RITU (A) 29, 305 (1981).
   Google Scholar
• E. A. Kramer, W. L. Johnson and C. Cline, Appl. Phys. Lett. 35, 815 (1979).
   Google Scholar
• R. Ray, Metal Progress 124 (1), 29 (1982).
   Google Scholar
• R. Ray, V. Panchanathan and S. Isserow, J. Metals 35 (6), 30 (1983).
   Web of Science ®Google Scholar
• S. Ashley, Am. Metal Market Metalworking News 89 (95),14 (1981).
   Google Scholar
• Proc. of the 29th Annual Conference on Magnetism and Magnetic
   Google Scholar
• C. F. Cline and R. W. Hopper, Scripta Metall. 11, 1137 (1977).
   Google Scholar
• D. G. Morris, J. Mater. Sci. 17, 1789 (1982).
   Web of Science ®Google Scholar
• S. A. Miller and R. J. Murphy, as in [7], p. 385.
   Google Scholar
• T. Negishi, T. Ogura, T. Masumoto, T. Goto, K. Fukuoka and Y. Syno, J. Mater. Sci. 20, 399 (1985).
   Web of Science ®Google Scholar
• D. J. Goldwasser, E. P. Otolka and B. H. Kear, Mater. Sci. Engng 34, 139 (1978).
   Web of Science ®Google Scholar
• J. R. Strife and K. M. Prewo, SAMPE J.16 (3), 8 (1980).
   Google Scholar
• W. M. S. B. W. Kadir, C. Hazeldean and B. Cantor, J. Mater. Sci. 15, 2663 (1980).
   Web of Science ®Google Scholar
• S. J. Cytron, J. Mater. Sci. Lett. 1, 211 (1982).
   Google Scholar
• A. S. Argon, G. W. Haskins and H. Y. Kuo, J. Mater. Sci. 14, 1707 (1979).
   Web of Science ®Google Scholar
• L. Ackerman and P. Fournier, as in [4], p. 85.
   Google Scholar
• H. Kreye, Y. Yoshino and K. Inomata, Scripta Metall. 12, 1059 (1978).
   Google Scholar
• B. C. Giessen, N. M. Madhava, R. J. Murphy, R. Ray and J. Surette, Metall. Trans. 8A, 364 (1977).
   Web of Science ®Google Scholar
• P. H. Shingu, K. Shimchura and R. Ozoki, Trans. Jpn Inst. Met. 20, 33 (1979).
   Google Scholar