Modeling of Transient Flow Phenomena in Continuous Casting of Steel

References

• Huang, X. and Thomas, B. G., Modeling of steel grade transition in continuous slab casting processes. Metallurgical Transactions, 1993,24B, 379–393.
   Web of Science ®Google Scholar
• Lawson, G. D., Sander, S. C., Emling, W. H., Moitra, A. and Thomas, B.G, Prevention of shell thinning breakouts associated with widening width changes. Steelmaking Conference Proceedings, 77, Iron and Steel Society, Warrendale, PA, 1994, pp. 329–336.
   Google Scholar
• Moitra, A., Thermo-mechanical model of steel shell behavior in continuous casting. Ph.D. thesis, University of Illinois at Urbana-Champaign, 1993.
   Google Scholar
• Brimacombe, J. K., Empowerment with knowledge—toward the intelligent mold for the continuous casting of steel billets. Met-allurgical Transactions B, 1993,24B, 917–935.
   Web of Science ®Google Scholar
• Perkins, A., Brooks, M. G. and Haleem, R. S., Roll performance in continuous slab casting machines. Ironmaking and Steelmaking, 1985,12(6), 276–283.
   Web of Science ®Google Scholar
• Teshima, T., Osame, K., Okimoto, K. and Nimura, Y., Improve-ments of surface property of steel at high casting speed. Steelmaking Conference Proceedings, 71, Iron and Steel Society, Warrendale, PA, 1988, pp. 111–118.
   Google Scholar
• Honeyands, T. and Herbertson, J., Flow dynamics in thin slab caster moulds. Steel Research, 1995,66(7), 287–293.
   Google Scholar
• Emling, W. H., Waugaman, T. A., Feldbauer, S. L. and Cramb, A. W., Subsurface mold slag entrainment in ultra-low carbon steels Steebnaking Conference Proceedings, 77, Chicago, IL, Iron and Steel Society, Warrendale, PA, 1994, pp. 371–379.
   Google Scholar
• Kumar, S., Walker, B. N., Samarasekera, I. V. and Brimacombe, J. K., Chaos at the meniscus—the genesis of defects in continuously cast steel billets. PTD Conference Proceedings, 13, Iron and Steel Society, Warrendale, PA, 1995, pp. 119–141.
   Google Scholar
• Jenkins, M. S., Thomas, B. G., Chen, W. C. and Mahapatra, R. B., Investigation of strand surface defects using mold instru-mentation and modeling. Steelmaking Conference Proceedings, 77, Iron and Steel Society, Warrendale, PA, 1994, pp. 337–345.
   Google Scholar
• Thomas, B. G. and Zhu, H., Thermal distortion of solidifying shell in continuous casting of steel. In Proceedings of International symposia on Advanced Materials and Technology for the 21st Century, eds. I. Ohnaka and D. Stefanescu. TMS, Warrendale, PA, Honolulu, HI; 1996, pp. 197–208.
   Google Scholar
• Yasunaka, H., Taniguchi, K., Kokita, M. and Inoue, T., Surface quality of stainless steel type 304 cast by twin-roll type strip caster. Iron and Steel Institute of Japan, 1995,35(6), 784–789.
   Google Scholar
• Kubota, J., Okimoto, K., Shirayama, A. and Murakami, H., Men-iscus flow control in the mold by travelling magnetic field for high speed slab caster. In Mold Operation for Quality and Productivity, eds. A. W. Cramb and E. Szekeres. Iron and Steel Society, War-rendale, PA, 1991.
   Google Scholar
• Huang, X. and Thomas, B. G., Intermixing model of continuous casting during a grade transition. Metallurgical Transactions B, 1996, 27B(4), 617–632.
   Google Scholar
• Thomas, B. G., Modeling study of intermixing in tundish and strand during a continuous-casting grade transition. ISS Trans-actions, 1996,24(12), 83–96.
   Google Scholar
• Damle, C. and Sahai, Y., Modeling of grade change operations during continuous casting of steel—mixing in the tundish. Iron and Steelmaker (ISS Transactions), 1995,22(6), 49–59.
   Google Scholar
• Chen, H. and Pehlke, R. D., Minimization of transition slabs based on tundish flow control. Steelmaking Conference Proceedings, 77, Iron and Steel Society, Warendale, PA, 1994,695-702.
   Google Scholar
• Austin, P. R., Camplin, J. M., Herbertson, J. and Taggart, I. J., Mathematical modeling of thermal stratification and drainage of steel ladles. Iron and Steel Institute of Japan International, 1992, 32 (2), 196–202.
   Google Scholar
• Chakroborty, S. and Sahai, Y., Mathematical modeling of trans-port phenomena in continuous casting tundishes part 1. Transient effects during ladle transfer operations. 1992,19(6), 479–487.
   Google Scholar
• Huang, X., In Mathematical Models of Continuous Casting of Steel Slabs, Annual Report to Continuous Casting Consortium, ed. B. G. Thomas. University of Illinois, Urbana, IL; 1993.
   Google Scholar
• Thomas, B. G., Huang, X. and Sussman, R. C., Simulation of argon gas flow effects in a continuous slab caster. Metall. Trans. B., 1994,25B(4), 527–547.
   Google Scholar
• Patankar, S. V., Numerical Heat Transfer and Fluid Flow, McGraw-Hill, New York, 1980.
   Google Scholar
• Huang, X., Studies on turbulent gas-particle jets and 3D turbulent recirculating gas-particle flows. Ph.D. thesis, Tsinghua University, Beijing, P.R. China, 1988.
   Google Scholar
• Soo, S. L., Fluid Dynamics of Multiphase System, Chapter 3: Trans-port Processes of a Deformable Particle, Blaisdell Publishing Co., Waltham, MA, 1967.
   Google Scholar
• Ishii, M., Thermo-Fluid Dynamic Theory of Two-Phase Flow, Eyrolls, Paris, 1975.
   Google Scholar
• Hinze, J. O., Turbulence, McGraw-Hill, New York, 1975.
   Google Scholar
• Schlichting, H., Boundary-Layer Theory, McGraw-Hill, New York, 1979.
   Google Scholar
• Malin, M. R. and Spalding, D. B., A two-fluid model of the tur-bulence and its application to heated plane jet and wakes. Physic° Chemical Hydrodynamics, 1984,5(5-6), 339–362.
   Google Scholar
• Burty, M., Fautrelle, Y. and Huin, D., A computational model for the prediction of turbulent recirculating two-phase flows in a gas-stirred steel ladle. In Proceedings of the 6th International Iron and Steel Congress. 1, ed. Y. Yagi, ISIJ, Tokyo, Nagoya, Japan, 1990, pp. 444–465.
   Google Scholar
• Ilegbusi, O. J. and Szekely, J., The modeling of gas-bubble driven circulation systems. Iron and Steel Institute of Japan International, 1990,30(9), 731–739.
   Google Scholar
• Sheng, Y. Y. and Irons, G. A., Turbulence modeling of plume flows in a gas stirred ladle. Process Technology Conference (75th Steelmaking Conference), 1992. Toronto, Ontario, Canada, The Iron and Steel Society, Warrendale, PA.
   Google Scholar
• Huang, X., Thomas, B. G. and Najjar, F. M., Modeling superheat removal during continuous casting of steel slabs. Metallurgical Transactions B, 1992,23B(6), 339–356.
   Google Scholar
• Hershey, D. E., Thomas, B. G. and Najjar, F. M., Turbulent flow through bifurcated nozzles. International Journal for Numerical Methods in Fluids, 1993,17, 23–47.
   Web of Science ®Google Scholar
• Launder, B. E. and Spalding. D. B. Numerical computation of turbulent flows. Computer Methods in Applied Mechanics and Engineering, 1974,13,269–289.
   Google Scholar
• Thomas, B. G. and Najjar, F. M., Finite-element modeling of turbulent fluid flow and heat transfer in continuous casting. Applied Mathematical Modeling, 1991.15,226–243.
   Web of Science ®Google Scholar
• Birat, J. P., Etude experimentale des jrs confines dans le cas de l'introduction d'acier liquide en lingotiere de coulee continue de brames. Presented at 3rd Congres de Mecanique Francais, Grenoble. 6-9 September 1977.
   Google Scholar
• Gupta, D. and Lahiri, A. K., A water model study of the flow asymmetry inside a continuous slab casting mold. Metallurgical and Materials Transactions, 1996,27B(5). 757–764.
   Google Scholar
• Ho, B., Characterization of interfacial heat transfer in the con-tinuous slab casting process. Masters thesis. University of Illinois at Urbana-Champaign, 1992.
   Google Scholar
• McDavid, R., Fluid flow and heat transfer behavior of top-surface flux layers in steel continuous casting. Masters thesis, University of Illinois at Urbana-Champaign, 1994.
   Google Scholar
• McDavid, R. and Thomas, B. G., Flow and thermal behavior of top-surface flux/powder layers in continuous casting molds. Met-allurgical Transactions B, 1996,27B(4). 672–685.
   Google Scholar
• Szekely, J., Fluid Flow Phenomena in Metals Processing. Academic Press, Inc., New York, 1979.
   Google Scholar