References
- O. Grässel, G. Frommeyer, C. Derder and H. Hofmann, J. Phys. IV, 1997, vol. 7, pp. C5–383.
- O. Grässel, L. Kröger, G. Frommeyer and L. W. Meyer, Int. J. Plast. , 2000, vol. 16, p. 1391.
- U. Brax, G. Frommeyer, O. Grässel, L.W. Meyer and A. Weise, Steel Res. Int. , 2002, vol. 73, p. 294.
- L. Kröger, L.W. Meyer, U. Brax, G. Frommeyer and O. Grässel, J. Phys. IV, 2003, vol. 110, p. 189.
- Anonym, Arcelor Auto, 2005, No. 10, p. 2.
- H. Hofmann, M. Menne, S. Göklii and H. Richter, Proc. of Int. Conf. on Steel Future for the Automotive Industry, Wiesbaden, Germany, 2005, p. 73.
- Y. S. Han and S. H. Hong, Mat. Sci. Eng. A, 1997, vol. 222, p. 76.
- K. Sato, M. Ichinose, Y. Hirostu and Y. Inoue, ISIJ Int. , 1989, vol. 29, p. 868.
- G. Frommeyer, U. Brax and P. Neumann, ISIJ Int. , 2003, vol. 43, p. 438.
- A. S. Hamada and L.P. Karjalainen, Canad. Metall. Quar, 2006, vol. 45, p.418.
- A. S. Hamada, L. P. Karjalainen and M.C. Somani, Mater. Sci. Eng. A, submitted.
- J. S. Perttula and L. P. Karjalainen, Mater. Sci. Technol. , 1998, vol. 14, p. 626.
- X. J. Liu, S.M. Hao, L.Y. Xu, Y.F. Guo and H. Chen, Metall. Trans. A, 1996, vol. 27 A, p. 2429.
- G. V. Raynor and V.G. Rivlin, Phase Equilibria in Iron Ternary Alloys, Carlton House Terrace, London, UK, 1988, p. 98.
- W. C. Cheng, H.Y. Lin and C.F. Liu, Mater. Sci. Eng. A, 2002, vol. 335,
- W. C. Cheng and C.K. Lai, Scr. Mater, 2006, vol. 55, p. 783.
- A. S. Hamada, L. P. Karjalainen and M.C. Somani, Proc. of Int. Symp. on Fundamentals of Deformation and Annealing, Manchester, UK, 2006 (in print).
- B. Jiang, X. Qi, S. Yang, W. Zhou and T.Y. Hsu, Acta Mater. , 1998, vol. 46, p. 501.
- C. M. Sellars, W.J.Mc G. Tegart, Int. Metall. Rev. , 1972, vol. 17, p. 1.
- El. Poliak and E Siciliano, Proc. of Mater. Sci. & Tecnol. Conf. , New Orleans, Louisiana, USA, 2004, p. 39.
- S. H. Cho, K. B. Kang and J.J. Jonas, Mater. Sci. Technol. , 2002, vol. 18, p. 389.
- E Garofalo, Trans. Metall. Soc. AIME, 1963, vol. 227, p. 351.
- J. J. Jonas, C.M. Sellars and W.J. McG. Tegart, Metall. Rev. , 1969, vol. 14, p. 1.
- J. M. Cabrera, J. J. Jonas and J.M. Prado, Mater. Sci. Forum, 1998, vol. 284-286, p. 127.
- H. J. McQueen and D. L. Bourell, J. Met. , 1987, p. 28.
- M. Elwahabi, J.M. Cabrera and J.M. Prado, Mater. Sci. Eng. A, 2003, vol. 343, p. 116.
- M. Avrami, J. Chem. Phys. , 1939, vol.7, p. 1103.
- M. C. Somani, L. P. Karjalainen, D.A. Porter and R.A. Morgridge, Proc. of Int. Conf. on Thermo-mechanical Processing: Mechanics, Microstructure & Control, University of Sheffield, UK, 2003, p. 436.
- H. J. McQueen, S. Yue, N.D. Ryan and E. Fry, J. Mater. Proc. Technol. , 1995, vol. 53, p. 293.
- W. Roberts: in “Deformation, Processing and Structures”, G. Krauss, ed., ASM, Metals Park, Ohio, USA, 1984, p. 109.
- G. B. Olson and M. Cohen, Metall. Trans. A, 1976, vol. 7 A, p. 1897.
- Y. Prasad and N. Ravichandran, Bull. Mater. Sci. , 1991, vol. 14, p. 1241.