References
- M. Ahmetoglu, “The Basic Elements of Tubular Hydroforming,” The FABRICATOR, 2001, http:www.thefabricator.com.
- D. A. Oliveira, M. J. Worswick, R. Grantab, B. Williams, and R. Mayer, “Effect of Forming Process Variables on the Crashworthiness of Aluminum Alloy Tubes”, International Journal of Impact Engineering, May 2006, vol. 32 (5), pp. 826–846.
- B. W. Williams, D. A. Oliveira, C. H. M. Simha, M. J. Worswick and R. Mayer, “Crashworthiness of Straight Section Hydroformed Aluminum Tubes,” Accepted into the International Journal of Impact Engineering 2005.
- N. Dwyer, M.J. Worswick, J. Gholipour, C. Xia and G. Khodayari, “Pre-bending and Subsequent Hydroforming of Tube: Simulation and Experiment”, Proceedings of Numisheet, 2002, pp. 447–452.
- K. Trana, “Finite Element Simulation of the Tube Hydroforming Process — Bending, Preforming and Hydroforming,” Journal of Materials Processing Technology, 2002, vol. 127, pp 401–408.
- J. Yang, B. Jeon and S. Oh, “The Tube Bending Technology of a Hydroforming Process for an Automotive Part”, Journal of Materials Processing Technology, 2001, vol. 111, pp 175–181.
- G. T. Kridli, L. Bao, P. K. Mallick and Y. Tian, “Investigation of Thickness Variation and Corner Filling in Tube Hydroforming,” Journal of Materials Processing Technology, 2003, vol. 133, pp 287–296.
- N. Asnafi, T. Nilsson and G. Lassl, “Tubular Hydroforming of Automotive Side Members with Extruded Aluminium Profiles,” Journal of Materials Processing Technology, 2003, vol. 142, pp.93–101.
- G. Khodayari, “Final Report USAMP Hydroforming of Aluminum Tubes (Phase I)”, US/AMP, 2002.
- J. Gholipour, M. J. Worswick, N. Dwyer, G. Khodayari, “Damage Development During Bending and Hydroforming of Aluminum Alloy Tube”, Proceedings of Plasticity 2003, 2003, pp. 172–174.
- J. Gholipour, M. J. Worswick and D. A. Oliveira, “Application of Damage Models in Bending and Hydroforming of Aluminum Alloy Tube,” Paper # 2004-01-0835, Society of Automotive Engineers, Warrendale, PA.
- J. Gholipour, M. J. Worswick and D. A. Oliveira, “Severity of the Bend and Its Effect on the Subsequent Hydroforming Process for Aluminum Alloy Tube,” Proceedings of the 8th International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM 2004, Columbus, Ohio, 13-17 June 2004, pp. 1089-1094.
- J. N. Dyment, M. J. Worswick, E Normani, D.A. Oliveira and G. Khodayari, “Effect of Endfeed on the Strains and Thickness During Bending and on the Subsequent Hydroformability of Steel Tubes,” International Body Engineering Conference, 2003.
- D. A. Oliveira, M. J. Worswick and R. Grantab, “Effect of Lubricant in Mandrel-Rotary Draw Tube Bending of Steel and Aluminum,” Canadian Metallurgical Quarterly, 2005, vol. 44 (1).
- Personal communication, YAW Aluminium GmbH, 2001.
- D. A. Oliveira, “Electromagnetic Forming of Aluminum Alloy Sheet: Experiment and Model”, Masters Thesis, 2002, Department of Mechanical Engineering, University of Waterloo, Waterloo, Ontario, Canada.
- A. Bardelcik, “The Effect of Bending Boost and Hydroforming End-feed on the Hydroformability of DP600 and IF Steel Tube” Masters Thesis, 2006, Department of Mechanical Engineering, University of Waterloo, Waterloo, Ontario, Canada.