Reference
- Steel, 1941,108,76.
- R. P. Koehring: 'Powder metallurgy', (ed. J. Wulff), 304; 1942, Cleveland, Ohio, American Society for Metals.
- G. Wassermann: Z. Metallkd., 1947, 38, 129.
- 1970 Int. Powder Metallurgy Conf., New York, 12–16 July 1970.
- H. H. Hausner and S. Z. Meschkow: 'Powder metallurgy forging bibliography', 3 ed., 1; 1975, Philadelphia, Pa, The Franklin Institute Press.
- G. Bockstiegel: 'HFF-Bericht 9. Umform-technisches Kolloquium 1977', 27; 1977, Hanover, Gesellschaft fiir Produktionstechnik.
- F. Hanejko: 'Progress in powder metallurgy 1977', (ed. S. Mocarski and T. W Pietrocini), Vol. 33,5; 1977, Princeton, NJ, Metal Powder Industries Federation.
- Yu. G.Dorofeev: 'Dynamic hot pressing of porous powder preforms'; 1977, Moscow, Metallurgiya.
- G. T. Brown: 'Powder metallurgy: promises and problems', 96; 1975, Paris, Sociétë Francaise de Metallurgie-Materiaux et Techniques.
- H. F. Fischmeister: Annual Rev. Mater. Sci., 1975, 5, 151.
- H. F. Fischmeister, L. Olsson, and K. E. Easterling: Powder Metall.lnt., 1974, 6, 30.
- F. V. Lenel: Met. Eng. Q., 1974, 14, 24.
- G. Bockstiegel: 'Modern developments in powder metallurgy', (ed. H. H. Hausner and W. E. Smith), Vol. 7, 91; 1974, Princeton, NJ, Metal Powder Industries Federation.
- Yu, G. Dorofeev: 'Dynamic hot pressing in powder metallurgy'; 1972, Moscow, Metallurgiya.
- A. Lawley: 'Forging of powder metallurgy preforms', (ed H. H. Hausner, K. H. Roll, and P. K. Johnson), 153; 1973, New York, Metal Powder Industries Federation.
- G. T. Brown: Powder Metall., 1971, 14, (27), 124.
- J. S. Hirschhorn and R. B. Bargainnier: J. Met ., 1970,22,21.
- Powder metallurgy forging bibliography', 3 ed.; 1975, Philadelphia, Pa, The Franklin Institute Press.
- A. Squire: Trans. AIME, 1947, 171, 473, 485.
- M. Eudier: Powder Metall., 1962, (9), 278.
- M. Kaufman and S. Mocarski: Int. J. Powder Metall., 1971,7,19.
- G. T. Brown and P. K. Jones: ibid., 1970,6,29.
- Y. Ishimaru, Y. Saito, and Y. Nishino: 'Modern developments in powder metallurgy', (ed, H. H. Hausner), Vol. 4, 441; 1971, New York, Loudon, Plenum Press.
- A. Salak, V. Miskovic, E. Dudrova, and E. Rudnayova: Powder Metall. Int., 1974,6, 128.
- G. Bockstiegel and C.-A. Blände: ibid., 1976,
- R. Haynes: Powder Metall., 1977, 20, 17.
- R. M. German: Int. J. Powder Metall. Powder Technol., 1977, 13,259.
- D. Pohl and F. Redlinger: Powder Metall. Int., 1977,9,164.
- G. Petzow and W. J. Huppmann: Z. Metallkd., 1976, 67, 579.
- G. Zapfand J. Niessen: 'Infiltrierte Eisenwerkstoffe-Herstellung und Eigenschaften"; 1973, Opladen, Westdeutscher Verlag.
- H. F. Fischmeister and L. E. Larsson: Powder Metall., 1974,17,227.
- H. Fischmeister and H. Drar: Powder Metall. mt., 1977,9, 114.
- F. J. Esper and R. Zeller: Powder Metall. ( Conf.suppl.: Part 1),1971,311.
- W. J. Huppmann, W. Kaysser, and F. Esper: Z. Werkstofftech., 1976,7,190.
- S. M. Kaufman: 'Modern developments in powder metallurgy', (ed, H. H. Hausner and P. W. Taubenblat), Vol. 10, 1; 1977, Princeton, NJ, Metal Powder Industries Federation.
- Y. E. Smith and H. Watanabe: ibid., Vol. 9, 277.
- H. W. Antes and P. L. Stockl: Powder Metall., 1974, 17, (33), 178.
- K. H. Moyer: 'Progress in powder metallurgy', (ed, G. D. Smith), Vol. 31, 111; 1975, Princeton, NJ, Metal Powder Industries
- M. J. Koczak, C. L. Downey, and H. A. Kuhn: Powder Metall. Int., 1974,6, 13.
- W. J. Huppmann: Powder Metall., 1977, 20, 36.
- H. A. Kuhn and C. L. Downey: Int. J. Powder Metall. Powder Technol., 1974, 10, 59.
- G. Bockstiegel and U. Björk: Powder Metall., 1974, 17, (33), 126.
- H. F. Fischmeister, B. Arén, and K. E. Easterling: ibid., 1971, 14, (24), 144.
- T. L. Guest, M. Negm, and R. Davies: ibid., 1973, 16, (32), 314.
- R. M. Pilliar, W. J. Bratina, and J. T. McGrath: 'Modern developments in powder metallurgy', (ed. H. H. Hausner and W. E. Smith), Vol. 7, 51; 1974, Princeton, NJ, Metal Powder Industries Federation.
- G. Zapf: Powder Metall., 1970, 13, 130.
- G. Zapf, G. Hoffmann, and K. Dalal: Z. Werk - stofftech., 1975, 6, 384 and 424.
- G. Zapf and J. Niessen: Powder Metall. ( Conf. suppl.: Part 1), 1971, 151.
- G. Hoffmann and K. Dalal: 'Modern develop-ments in powder metallurgy', (ed. H. H. Hausner and P. W. Taubenblat), Vol. 10, 171; 1977, Princeton, NJ, Metal Powder Industries Federation.
- S. Corso and C. Downey: Powder Metall. Int., 1976,8, 170.
- K. E. Buchovecky and M. R. Rearick: 'Forging of powder metallurgy preforms', (ed. H. H. Hausner, K. H. Roll, and P. K. Johnson), 319; 1973, New York, Metal Powder Industries Federation.
- Met. Progr., 1977, 111, (1), 58.
- P. K. Johnson: Int. J. Powder Metall. Powder Technol., 1976, 12, 327.
- R. H. Hoefs: 'Modern developments in powder metallurgy', (ed. H. H. Hausner and W. E. Smith), Vol. 7,457; 1974, Princeton, NJ, Metal Powder Industries Federation.
- S. J. Donachie: ibid., 341.
- C. Moore: Presentation at 5th Int. Powder Metallurgy Conf., Chicago, 28 June-2 July 1976; summary in Met. Powder Rep., 1976, 31, 325.
- H. Honess, W. Kramer, P. S. Raghupathi, and H. Wilky: Industrie Anz., 1971, 93, 2563.
- T. Nakagawa, T. Amano, and M. Nagase: 'Modern developments in powder metallurgy', (ed. H. H. Hausner and W. Smith), Vol. 7, 411; 1974, Princeton, NJ, Metal Powder Industries Federation.
- K. Obara, Y. Nishino, and Y. Saito: ibid., 423.
- R. J. Dower and G. I. Miles: Powder Metall., 1976, 19, 141.
- H. Höness: Industrie Anz., 1976,98, 1505.
- H. Ferguson: 'Modern developments in powder metallurgy', (ed. H. H. Hausner and P. W. Taubenblat), Vol. 11, 173; 1977, Prince-ton, NJ, Metal Powder Industries Federation.
- H. Fischmeister: Powder Metall. Int., 1976, 4, 181.
- H. Honess: 'Berichte Institut fur Umform - technik Universität Stuttgart', (ed. K. Lange), Vol. 40; 1976, Essen, W. Germany, W. Girardet.
- G. Naeser and F. Zirm: Metall. Rev., 1959, 4, 1315.
- R. W. Fraser and D. J. I. Evans: Powder Metall., 1968,11, (22), 358.
- M. H. D. Blore, B. W. Kushnir, W. R. Duncan, and A. H. Lee: Sheet Met. Ind., 1972,49, 404.
- T. Sakai: Metall. Met. Form., 1974, 41, 310.
- Yu. I. Kovalenko and G. A. Vinogradov: Soy. Powder Metall. Met. Ceram., 1975, 14, 713.
- W. Pietsch: 'Roll pressing'; 1976, London, New York, Rheine, Heyden.
- W. F. Marley, Jr: In/.J. Powder Metall. Powder Technol., 1977,13, 55.
- G. H. Gessinger and M. J. Bomford: Int. Metall. Rev., 1974, 19, 51.
- 'Advanced manufacturing methods and their economic implications: some pilot papers on powder metallurgy and joining', AGARD Report No. 627; 1975, Neuilly-Sur-Seine, AGARD.
- 'Advanced fabrication techniques in powder metallurgy and their economic implications', AGARD Conf. Proc. No. 200; 1976, Neuilly-Sur -Seine, AGARD.
- L. P. Clark: Ref. 74, Paper FS. 2–1.
- P. Hellmann: Met. Powder Rep., 1977, 32, 79.
- K. Zander: Powder Metall. Int., 1970, 2, 129.
- R. L. Sands, E. P. Herbert, and W. R. Morgan: Powder Metall., 1965,8, (15), 129.
- R. Diedrichs and R. Thielmann: DEW Tech. Ber., 1972, 12, 35.
- L. Olsson, V. Lampe, and H. F. Fischmeister: Powder Metall., 1974, 17, (34), 347.
- R. P. H. Fleming: Preprints, 1976 Powder Metallurgy Group Meeting, Eastbourne, Paper 5, The Metals Society.
- J. J. Dunkley and R. J. Causton: Int. J. Powder Metall. Powder Technol., 1977, 13, 13.
- V. G. Gorobtsov and O. V. Roman: ibid., 1975, 11, 55.
- O. V. Roman: 'Modern developments in powder metallurgy', (ed. H. H. Hausner), Vol. 4, 513; 1971, New York, London, Plenum Press.
- H. H. Hausner: 'Handbook of powder metal-lurgy'; 1973, New York, Chemical Publishing Co.
- H. H. Hausner and H. C. Wenk: 'Iron powder metallurgy', (ed. H. H. Hausner, K. H. Roll, and P. K. Johnson), 350; 1968, New York, Plenum Press (Bibliography on powder production).
- R. R. Holmes: Int. J. Powder Metall. Powder Technol., 1975, 11, 161.
- N. Dautzenberg and J. Hewing: Powder Metall. ( Conf. suppl.: Part 1), 1971, 173.
- R. L. Rueckl: Int. J. Powder Metall. Powder Technol., 1975, 11, 209.
- B. Lengyel, C. L. Tan, and G. G. Teh: Powder Metall., 1976, 19, 134.
- R. J. Dower: Powder Metall. Int., 1977,9, 190.
- T. Nakagawa and C. S. Sharma: 'Modern developments in powder metallurgy', (ed. H. H. Hausner and P. W. Taubenblat), Vol. 9, 347; 1977, Princeton, NJ, Metal Powder Industries Federation.
- P. U. Gummeson: Powder Metall., 1972, 15, (29), 67.
- P. B. Wallis: Powder Metall. Int., 1976, 8, 167.
- A. Lawley: Int. J. Powder Metall. Powder Technol., 1977, 13, 169.
- S. L. Shinde and G. S. Tendolkar: Powder Metall. Int., 1977,9, 180.
- J. J. Dunkley: ibid., 1978, 10, 38.
- L. P. Clark: Ref. 73, Paper 1–1.
- N. J. Grant: 'Powder metallurgy for high performance applications', (ed J. J. Burke and V. Weiss), 85; 1972, Syracuse, NY, Syracuse University Press.
- D. J. Hodkin, P. W. Sutcliffe, P. G. Mardon, and L. E. Russell: Powder Metall., 1973, 16, (32), 277.
- H. Stephan: Metall, 1975, 29, 705.
- S. Mocarski: 'Modern developments in powder metallurgy', (ed. H. H. Hausner and W. E. Smith), Vol. 7, 303; 1974, Princeton, NJ, Metal Powder Industries Federation.
- Y. Awano and T. Kimura: J. Jpn Soc. Powder Metall., 1973, 20, 37.
- J. G. Byrne and D. P. Ferriss: Powder Metall. Int., 1971, 3, 202.
- K. H. Moyer: 'Progress in powder metallurgy', (ed. R. F. Halter), Vol. 30, 193; 1974, Princeton, NJ, Metal Powder Industries Federation.
- P. Lindskog and G. Skoglund: Powder Metall. ( Conf. suppl.: Part 1), 1971, 375.
- L.-E. Larsson: Mater. Sci. EnAr., 1975, 19, 231.
- L.-E. Larsson: ibid., 241.
- H. J. Retelsdorf, R. M. Fichte, G. Hoffmann, and K. Dalal: Metall, 1975, 29, 1002.
- G. Zapf, G. Hoffmann, and K. Dalal: Powder Metall. 1975, 18, (35), 214.
- G. Zapf: 'Powder metallurgy: promises and problems', 48; 1975, Paris, Societe Francaise de Metallurgie Matériaux et Techniques.
- G. Zapf, G. Hoffmann, and K. Dalal: Arch. Eisenhlittenwes., 1975, 46, 347.
- G. Zapf and K. Dalal: 'Modern developments in powder metallurgy', (ed. H. H. Hausner and P. W. Taubenblat), Vol. 10, 129; 1977, Princeton, NJ, Metal Powder Industries Federation.
- M. J. Woulds, D. R. Pitcairn, and E. K. Weber: 'Proc. 1971 Fall P/M conf. ', (ed. S. Mocarski), 65; 1972, New York, Metal Powder Industries Federation.
- G. H. Gessinger and P. D. Cooper: 'Proc. 5th int. powder met. conf. GDR, Dresden', Paper 45; 1973, Dresden, Akademie der Wissen-schaften der DDR.
- Precis. Met., 1971, 29, 31.
- M. J. Koczak: Int. J. Powder Metall. Powder Technol., 1976, 12, 133.
- P. W. Sutcliffe: Ref. 74, Paper FS. 1.
- R. Widmer: 'Powder metallurgy for high performance applications', (ed. J. J. Burke and V. Weiss), 69; 1972, Syracuse, NY, Syracuse University Press.
- R. B. Bargainnier and J. S. Hirschhorn: 'Forging of powder metallurgy preforms', (ed. H. H. Hausner, K. H. Roll, and P. K. Johnson), 229; 1973, New York, Metal Powder
- N. Dautzenberg: personal communication.
- 'Powder metallurgy equipment manual', 1 ed., 1968, New York; 2 ed., 1977, Princeton, NJ, Metal Powder Industries Federation.
- R. A. Huseby and M. A. Scheil: 'Modern developments in powder metallurgy', (ed. H. H. Hausner), Vol. 4, 395; 1971, New York, London, Plenum Press.
- T. W. Pietrocini and D. A. Gustafson: ibid., 431.
- G. T. Brown and P. K. Jones: ibid., 369.
- G. Bockstiegel and H. Olsen: Powder Metall. ( Conf. suppl.: Part 1), 1971, 127.
- P. Popper: 'Isostatic pressing'; 1976, London.
- P. J. James: Met. Powder Rep., 1975, 30, 341.
- W. R. Morgan and R. L. Sands: Metall. Rev.,
- R. Kohl: Mach. Design, 1969, 41, (8), 142.
- H. O. McIntire, J. H. Peterson, and H. R.
- E. Fischer: Met. Powder Rep., 1976, 31, 368.
- H. Altman: Thesis, Technical University, Hanover, 1975.
- C. Durdaller: 'P/M forging seminar', Paper
- H. C. Jackson: 'Perspectives in powder metallurgy', (ed, H. H. Hausner, K. H. Roll, and P. K. Johnson), Vol. 1, 13; 1967, New York, Plenum Press.
- S. Mocarski and P. Eloff: Int. J. Powder Metall., 1971,7, (2), 15.
- P. Vernia: 'Modern developments in powder metallurgy', (ed. H. H. Hausner), Vol. 4, 475; 1971, New York, London, Plenum Press.
- G. T. Brown: personal communication.
- H. D. Hanes: 'Powder metallurgy for high-perfor mance applications', (ed. J. J. Burke and V. Weiss), 211; 1972, Syracuse, NY, Syracuse University Press.
- S. H. Reichman: Int. J. Powder Metall, Powder Technol., 1975, 11, 277.
- Met. Powder Rep., 1975, 30, 338.
- W. C. Burgess: Powder Metall. Int., 1976,8, 28.
- K. Lange (ed.) : 'Lehrbuch der Umformtechnik'; Umformtechnik'; 1974, Berlin, Heidelberg, New York, Springer-Verlag.
- R. F. Halter: 'Modern developments in powder metallurgy' (ed. H. H. Hausner and W. E. Smith), Vol. 7, 213; 1974, Princeton, NJ, Metal
- A. P. Crease, Jr: Met. Progr., 1975, 108, (4), 80.
- A. P. Crease, Jr: 'Progress in powder metal lurgy', (ed. G.D. Smith), Vol. 31, 203; 1975, Princeton, NJ, Metal Powder Industries Federation.
- B. G. Arén, L. Olsson, and H. F. Fischmeister: Powder Metall. Int., 1972,4, 117.
- H. F. Fischmeister, G. Sjoberg, B. O. Elfström, K. Hamberg, and V. Mironov: 'Modern develop-ments in powder metallurgy', (ed. H. H. Hausner and P. W. Taubenblat), Vol. 9, 437; 1977, Princeton, NJ, Metal Powder Industries Federation.
- P. J. Guichelaar and R. D. Pehlke: '1971 Fall powder metallurgy conf. proc. (ed. S. Mocarski), 109; 1972, New York, Metal Powder Industries Federation.
- P. Lindskog and S. E. Grek: 'Modern develop-ments in powder metallurgy', (ed. H. H. Hausner and W. E. Smith), Vol. 7, 285; 1974, Princeton, NJ, Metal Powder Industries Federation.
- J. P. Cook: 'Oxidation, reduction and de-carburization of metal powder preforms'; 1972, Riverton, NJ, Hoeganaes Corporation.
- J. P. Cook: 'Progress in powder metallurgy', (ed. R. F. Halter), Vol. 30, 173; 1974, Princeton, NJ, Metal Powder Industries Federation.
- N. Dautzenberg and J. Hewing: Powder Metall. Mt., 1977,9, 16.
- S. M. Kaufman: ibid., 1973, 5, 11.
- J. P. Cook: 'P/M forging seminar', Paper 3; 1971, Riverton, NJ, Hoeganaes Corporation.
- R. von Mises: Nachr. Ges. Wiss., Gottingen, 1913, 582.
- R. von Mises: Z. angew. Math. Mech., 1928, 8, 161.
- R. Hill: 'Plasticity': 1967, Oxford, Oxford University Press.
- R. J. Green: Int. J. Mech. Sci., 1972, 14, 215.
- M. Oyane, S..Shima, and Y. Kono: Bull. Jpn Soc. Mech. Eng., 1973, 16, 1254.
- H. A. Kuhn, M. M. Hagerty, H. L. Gaigher, and A. Lawley: 'Modern developments in powder metallurgy', (ed. H. H. Hausner), Vol. 4, 463; 1971, New York, London, Plenum Press.
- H. A. Kuhn and C. L. Downey: Mt. J. Powder Metall., 1971,7, 15.
- D. C. Drucker and W. Prager: Q. Appl. Math., 1952, 10, 157.
- A. W. Jenike and R. T. Schield: J. Appl. Mech., 1959, 81B, 599.
- N. P. Suh: Int. J. Powder Metall., 1969,5, 69.
- M. Hirschvogel: Thesis, Universität Stuttgart, 1975.
- W. Kreher and H. G. Schöpf: 'Proc. 5th int. powder metallurgy conf., GDR, Dresden', Vol. 1, Paper 7; 1973, Dresden, Akademie der Wissenschaften der DDR.
- B. Avitzur and P. Blum: 'Modern develop-ments in powder metallurgy', (ed. H. H. Hausner and W. E. Smith), Vol. 7, 73; 1974, Princeton, NJ, Metal Powder Industries Federation.
- H. W. Antes: 'Progress in powder metallurgy', (ed. A. S. Bufferd), Vol. 28, 5; 1972, New York, Metal Powder Industries Federation.
- B. G. A. Arén: Powder Metall. Int., 1975, 7, 12.
- T. J. Griffiths, W. Jones, M. Lundregan, and M. B. Basset: Powder Metall., 1974, 17, (33), 140.
- C.L. Downey and H. A. Kuhn: J. Eng. Mater. Technol. (Trans. ASME, H), 1975, 97, 121.
- C. L. Downey and H. A. Kuhn: Int. J. Powder Metall. Powder Technol., 1975, 11, 255.
- G. Hoffmann: Industrie Anz., 1975, 97, 2148.
- P. L. Stockl and H. W. Antes: ibid., 359.
- A. M. Sabroff, F. W. Boulger, and H. J. Henning: 'Forging material and practices'; 1968, New York, Reinhold Book Corporation.
- J. Niessen: 1971 Fall powder metall. conf. proc., (ed. S. Mocarski), 313; 1972, New York, Metal Powder Industries Federation.
- W. J. Huppmann: Int. J. Powder Metall. Powder Technol., 1976, 12, 275.
- P. Bossd, R. Tremblay, and R. Angers: ibid., 1975, 11, 247.
- K. Shimamura and K. Suzuki: J. Jpn Soc. Powder Powder Metall., 1976, 22, 265.
- K. Morimoto, K. Ogata, T. Yamamura, T. Yukawa, T. Saga, N. Yamada, and N. Sekiguchi: 'Modern developments in powder metallurgy', (ed. H. H. Hausner and W. E. Smith), Vol. 7, 323; 1974, Princeton, NJ, Metal Powder Industries Federation.
- B. L. Ferguson and A. Lawley: ibid. 485.
- R. F. Halter: 'Modern developments in powder metallurgy', (ed. H. H. Hausner), Vol. 4, 385; 1971, New York, London, Plenum Press.
- Mater. Eng., 1974, 79, 55.
- G. Schorp: 'VDI-Berichte Nr. 47'; 1961, Düsseldorf, VDI-Verlag.
- M. Burgdorf: Paper presented at Int. Cold Forging Congress, 1975, Brighton.
- H. Meyer Nolkemper and D. Heinemeyer: 'HFF-Bericht 9. Umformtechnisches Kolloquium 1977', 53; 1977, Hanover, Gesell-schaft fiir Produktionstechnik.
- A. Kannapan: Met. Form., 1969, 36, 335; 1970, 37, 6, and 21.
- G. Lusa: 'Modern developments in powder metallurgy', (ed. H. H. Hausner), Vol. 4, 425; 1971, New York, London, Plenum Press.
- T. W. Pietrocini: Precis. Met. Molding, 1973, 31, (2), 23.
- K. H. Golf: MM—Maschinenmarkt, 1973, '79, 967.
- K. Lange and K. Roll: Industrie Anz., 1974, 96, 1621.
- H. W. Haller: Wt.-Z. in Fertigung, 1973, 63,69.
- R. Davies and R. H. T. Dixon: Powder Metall., 1971, 14, (28), 207.
- R. M. Pilliar, D. R. Hollingbery, and W. F. Fossen: Int. J. Powder Metall. Powder Technol., 1977, 13, 99.
- S. M. Kaufman: Int. J. Powder Metall., 1974, 10, 257.
- G. T. Brown and J. A. Steed: Powder Metall., 1974, 17, (33), 157.
- G. T. Brown: Met. Technol., 1976, 3, (5-6), 229.
- P. C. Eloff and L. E. Wilcox: 'Modern develop-ments in powder metallurgy', (ed. H. H. Hausner and W. E. Smith), Vol. 7, 213; 1974, Princeton, NJ, Metal Powder Industries Federation.
- O. Voigtlander; 'HFF-Bericht 9. Umform-technisches Kolloquium 1977', 7; 1977, Hanover, Gesellschaft fiir Produktionstechnik.
- Yu. G. Dorofeev, N. T. Zherdickii, V. I. Ustimenko, and L. G. Marinenko: Sci. Sinter., 1977, 9, 187.
- B. L. Ferguson, S. K. Suh, and A. Lawley: Ml. J. Powder Metall. Powder Technol., 1975, 11, 263.
- J. A. Steed: Powder Metall, 1975, 18, (35), 201.
- S. Mocarski: Int. J. Powder Metall. Powder Technol., 1976, 12, 47.
- R. Davies and M. Negm: Powder Metall., 1977, 20, 39.
- T. J. Ladanyi et al.: Metall. Trans., 1975, 6A, 2037.
- Yu. G. Dorofeev, N. T. Zherditskii, V. N. Mishchenko, and V. N. Dmitrovskii: Soc. Powder Metall. Met. Ceram., 1974, 13, 152.
- S. Corsoand V. Giordano: 'Preprints', 1976 Powder Metallurgy Group Meeting, Eastbourne, The Metals Society.
- M. P. Swain and E. L. Butera: 'Modern developments in powder metallurgy', (ed. H. H. Hausner and W. E. Smith), Vol. 8, 281; 1974, Princeton, NJ, Metal Powder Industries Federation.
- K. E. Buchovecky and M. R. Rearick: Met. Progr., 1972, 101, (2), 74.
- S. Abkowitz: 'Titanium science and tech-nology', (ed. R. I. Jaffee and H. M. Burte), Vol. 1,381; 1973, New York, London, Plenum Press.
- R. H. Witt, O. Paul, M. T. Ziobro, and F. D. Barberio; ' Modern developments in powder metallurgy', (ed. H. H. Hausner and W. E. Smith), Vol. 8, 215; 1974, Princeton, NJ, Metal Powder Industries Federation.
- V. S. Rakovski, K. M. Borzetsovskaya, N. S. Olenina, and T. A. Bolotina: Soy. Powder Metall. Met. Ceram., 1973, 12,111.
- V. A. Pavlov, V. V. Shcherbina, V. P. Tokarev, and V. M. Litvin; ibid., 1974, 13, 380.
- M. Hirschvogel and F. Aldinger: 'Modern developments in powder metallurgy', (ed. H. H. Hausner and W. E. Smith), Vol. 7, 441; 1974, Princeton, NJ, Metal Powder Industries Federation.
- R. M. Shemenski and R. E. Maringer: J. Less-Common Met., 1969, 17, 25.
- J. M. Larson: cited in Ref. 72.
- A. K. Petrov, E. N. Smirnova, I. Ya. Kondratov, and L. V. Ocheretovaya: Soy. Powder Metall. Met. Ceram., 1976, 15, 346.
- M. T. Watkins: Powder Metall. ( Conf. suppl.: Part 1), 1971,30.
- D. J. Thornton: ibid., 58.
- D. Friedrich, H. Ohmann, and H. Schreiner: ibid., 71.
- A. Thomas: ibid., 109.
- R. D. Turner: ibid., 97.
- K. Imahashi, T. Suzuki, and C. Tsumiki: Met. Powder Rep., 1977, 32, 45.
- F. Winterberg: Powder Metall. Int., 1976,8, 134.
- L. F. Ochkas: Soy. Powder Metall. Met. Ceram., 1977, 15, 814.