Reference
- W. A. Backofen: ‘Fundamentals of deforma-tion processing', Proc. 9th Sagamore Army Materials Res. Conf., 1–8; 1962, Syracuse, NY, Syracuse University Press.
- K. Lange: ‘Proc 10th int. MTDR conf., Manchester, 1969’, (ed. S. Tobias), 485; 1970, Oxford, Pergamon.
- S. P. Keeler: SAE paper no. 650535, 1965.
- F. W. Wilson (ed.): 'Die design handbook'; 1965, New York, McGraw-Hill.
- 'Metals handbook', 8 ed., Vol. 4; 1969, Metals Park, Ohio, American Society for Metals.
- W. T. Lankford, S. C. Snyder, and J. A. Bauscher: Trans. ASME, 1950, 42, 1197.
- R. L. Whiteley: Trans. ASME, 1960, 52, 154.
- R. L. Whiteley: ‘Fundamentals of deforma-tion processing', Proc. 9th Sagamore Army Materials Res. Conf., 183–189; 1962, Syracuse, NY, Syracuse University Press.
- D. H. Lloyd: Sheet Met. Ind., 1962, 39, 82.
- W. F. Hosford and W. A. Backofen: ‘Funda-mentals of deformation processing', Proc. 9th Sagamore Army Materials Res. Conf., 259–298; 1962, Syracuse, NY, Syracuse University Press.
- R. Hill: Proc. R. Soc., 1948, A193, 281.
- R. Hill: ‘The mathematical theory of plasticity', 317–340; 1950, Oxford, Clarendon Press.
- R. T. Holcomb and W. A. Backofen: Colloquium of IDDRG, 1964, London, Institute of Sheet Metal Engineering.
- W. A. Backofen, W. F. Hosford, and J. J. Burke: Trans. ASM, 1962, 55, 264.
- I. L. Dillamore, R. J. Hazel, T. W. Watson, and P. Hadden: Int. J. Mech. Sci., 1971, 13, 1094.
- L. R. Jackson, K. F. Smith, and W. T. Lank-ford: Met. Technol., 1948, Tech. Pub. 2440.
- A. N. Bramley and P. B. Mellor: Int. J. Mech. Sci., 1966, 8, 101.
- R. Pearce: Int. J. Mech. Sci., 1968, 10, 995.
- J. Woodthorpe and R. Pearce: Int. J. Mech. Sci., 1970, 12, 341.
- I. L Dillamore: J. Phys.D (Appl. Phys.)', 1974, 7, 979.
- W. F. Hosford and C. Kim: Metall. Trans., 1976, 7A, 468.
- K. Yoshida: Inst. Phys. Chem. Res., 1969, 45, 157, Tokyo.
- K. Yoshida and K. Miyauchi: ‘Mechanics of sheet metal forming', 19–52; 1978, New York, Plenum Press.
- P. B. Mellor: J. Mech. Phys. Solids, 1956;5, 41.
- R. Venter, W. Johnson, and M. C. de Malherbe: Int. J. Mech. Sci., 1971, 13, 299.
- R. Hill: Math Proc. Cambridge Philos. Soc., 1979, 85, 179.
- A. Parmar and P. B. Mellor: Int. J. Mech. Sci., 1978, 20, 707.
- Z. Marciniak and K. Kuczynski: Int. J. Mech. Sci., 1967, 9, 609.
- D. H. Avery, W. F. Hosford, and W. A. Back-ofen: Trans. AIME, 1965, 233, 71.
- D. Lee and W. A. Backofen: Trans. AIME, 1966, 236, 1696.
- A. N. Bramley and P. B. Mellor: Int. J. Mech. Sci., 1968, 10, 211.
- M. Taghvaipour and P. B. Mellor: Proc. Inst. Mech. Eng., 1970, 185, 593.
- D. H. Rogers and W. T. Roberts: Inst. J. Mech. Sci., 1968, 10, 221.
- R. A. Fishburn, W. T. Roberts, and D. V. Wilson: Met. Technol., 1976, 3,310.
- Y. Tozawa: ‘Mechanics of sheet metal form-ing', 81–109; 1978, New York, Plenum Press.
- L. Bourne and R. Hill: Philos. Mag., 1950, 41, 671.
- M. Gotoh: Int. J. Mech. Sci., 1977, 19, 505.
- M. Gotoh and F. Ishise: Int. J. Mech. Sci., 1978, 20, 423.
- C. F. Shih and D. Lee: J. Eng. Mater. Tech. (Trans. ASME, H), 1978, 100, 295.
- H. J. Kleemola and A. J. Ranta-Eskola: Metall. Trans., 1976, 7A, 595.
- H. J. Kleemola and J. O. Kumpulainen: Sheet Met. Ind., 1978, 55, 703.
- A. K. Ghosh: ‘Mechanics of sheet metal form-ing', 287–312; 1978, New York, Plenum Press.
- A. K. Ghosh and J. V. Laukonis: Proc. 9th Biennial Congr., IDDRG, 167, 1976, Ann Arbor.
- A. K. Ghosh: J. Eng. Mater. Tech., (Trans. ASME, H), 1977, 99, 264.
- S. P. Keeler and W. A. Backofen: Trans. ASM Q., 1963, 56, 25.
- S. P. Keeler: SAE paper no. 650535, 1965.
- G. M. Goodwin: SAE paper no. 680093, 1968.
- S. P. Keeler: Sagamore Army Materials Res. Conf.; 1974, Raquette Lake, New York.
- K. Nakazima, T. Kikuma, and K. Hasuka: Yawata Technical Report No. 264, 1968.
- S. S. Hecker : American Deep Drawing Research Group Meeting, 1973, Pittsburgh.
- T. C. Hsu: Int. J. Prod. Res., 1974, 12, 99.
- R. M. Hobbs : Sheet Met. Ind., 1978, 55, 451.
- J. Havranek: J. Mech. Work. Tech., 1977, 1,2.
- E. M. Loxley and P. Freeman: J. Inst. Petrol., 1954, 40, 299.
- B. Fogg: Sheet Met. Ind., 1975, 52, 297.
- M. Grumbach and G. Sanz: Proc. 7th Biennial Congr., IDDRG, 1972, Amsterdam.
- M. Azrin and W. A. Backofen: Metall. Trans., 1970, 1,2857.
- H. W. Swift: J. Mech. Phys. Solids, 1952, 1, 1.
- A. K. Ghosh and S.S. Hecker: Metall. Trans., 1974,5,2161.
- A. K. Tadros and B. B. Mellor: Int. J. Mech. Sci., 1978, 20, 121.
- H. J. Kleemola and M. T. Pelkkikangas: Sheet Met. Ind., 1977, 54, 517.
- A K. Ghosh and W. A. Backofen: Metall. Trans., 1973, 4, 1113.
- A. K. Ghosh: Metall. Trans., 1974, 5, 1607.
- P. B. Mellor: Int. J. Mech. Sci., 1960, 1, 216.
- W. Johnson and P. B. Mellor: ‘Engineering plasticity'; 1973, London, Van Nostrand Reinhold.
- J. Woodthorpe and R. Pearce: Sheet Met. Id., 1969, 46,1061.
- A. B. Haberfield and M. W. Boyles: Sheet Met. Ind., 1973, 50, 400.
- J. Hiam and A. Lee: Sheet Met. Ind., 1978, 55, 631.
- A. B. Haberfield and M. W. Boyles: Metall. Mater. Technol., 1975, 7 , 453.
- M. J. Painter and R. Pearce: Met. Technol., 1975, 2, 62.
- O. Acselrad and D. V. Wilson: Sheet Met. Ind., 1979, 56, 408.
- R. Sowerby and J.L. Duncan: Int. J. Mech. Sci., 1971, 13, 217.
- R. Hill: J. Mech. Phys. Solids, 1952, 1, 19.
- A. Parmar and P. B. Mellor: Int. J. Mech. Sci., 1978, 20, 385.
- Z. Marciniak, K. Kuczynski, and T. Pokora: Int. J. Mech. Sci., 1973, 15, 789.
- J. W. Hutchinson and K. W. N. Neale: ‘Mechanics of sheet metal forming', 127–150, 269–283; 1978, New York, Plenum Press.
- A. K. Tadros and P. B. Mellor: Int. J. Mech. Sci., 1975, 17, 203.
- K. Yamaguchi and P. B. Mellor: Int. J. Mech. Sci., 1976, 18, 85.
- A. Parmar, P. B. Mellor, and J. Chakrabarty: Int. J. Mech. Sci., 1977, 19, 389.
- P. W. Bridgman: J. Appi. Phys., 1953, 24, 560.
- P. W. Bridgman: ‘Studies in large plastic flow and fracture 1952, New York, McGraw-Hill.
- G. S. Kular and R. Sowerby: Int. J. Mech. Sci., 1973, 15,349.
- R. Hill: Philos. Mag., 1950, 41,1133.
- M. C. S. de Nobrega, H. L. de Andrade, E. C. Sarmento, and G. Ferran: 'Proc. 10th biennial congr., IDDRG'; 1978, Warwick, Portcullis Press.
- B. Kaftanoglu and J. M. Alexander: Int. J. Mech. Sci., 1970, 12, 1065.
- A. K. Ghosh and S. S. Hecker: Metall. Trans., 1975, 6A, 1065.
- M. J. Painter and R. Pearce: 7th Biennial Congr., IDDRG, 1972, Amsterdam.
- G. G. Moore and J. F. Wallace: J. Inst. Met., 1964–65,93, 33.
- I. L. Dillamore, P. Mella, and R. J. Hazel: J. Inst. Met., 1972, 100, 50.
- J. M. Alexander: Metall. Rev., 1960, 5, 349.
- D. C. Chiang and S. Kobayashi: J. Eng. Ind. (Trans. ASME, B), 1966, 88,443.
- B. Budiansky and N. W. Wang: J. Mech. Phys. Solids, 1966, 14, 357.
- M. G. El- Sebaie and P. B. Mellor: Int. J. Mech. Sci., 1972, 14, 535.
- M.G. El-Sebaie and P. B. Mellor: Int. J. Mech. Sci., 1973, 15, 485.
- P. Ng, J. Chakrabarty, and P. B. Mellor: ‘Proc. 17th int. MTDR coal., Birmingham, 1976’, (ed. S. Tobias), 579–585; 1977, London, Macmillan.
- Y. Kasuga and S. Tsutsumi: Bull. Jpn Soc. Mech. Eng., 1965, 8, 120.
- E. Buerk: Sheet Met. Ind., 1967, 44, 182.
- H. Kasmacher: Sheet Met. Ind., 1977, 54, 37.
- Machinery, 1969, 126, 990.
- E. G. Maeder: Engineering, 1956, 181, 48.
- F. W. Boulger: Ann. CIRP, 1966, 14, 201.
- V. P. Martynov: Trans. Kharkov Aviation Inst., 1961, 21, 119.
- W. G. Granzow: Sheet Met. Ind., 1979, 56, 561.
- W. Panknin: Sheet Met. Ind., 1976, 53, 137.
- G. Habenicht: ‘Proc. 1st int. tinplate cod.1, 110–121; 1976, London, International Tin Research Institute.
- W. Panknin: ‘Proc. 1st int. tinplate conf. 200–214; 1976, London, International Tin Research Institute.
- G. Oehler: Ind. Anz., 1967, 89, 65.
- A. H. Cole: Sheet Met. Ind., 1980, 57, 172.
- Am. Mach., 1965, 109,116.
- D. J. Campion: Sheet Met. Ind., 1978, 55, 990.
- K. Miyauchi, T. Furubayashi, T. Herai, and C. Sudo: ‘Proc. 10th biennial congr.. IDDRG', 287–296; 1978, Warwick, Portcullis Press.
- A. Bragard, V. Leroy, H. Bonnarens, J. Richelmi, C. Marique, and C. Emond: 'Proc. 1-0th biennial congr., IDDRG', 253–278; 1978, Warwick, Portcullis Press.
- R. R. Hilsen and L. M. Bernick: ‘Relationship between surface characteristics and galling index of sheet steel’, STP 647, 220–237; 1977, Philadelphia, Pa, American Society for Testing and Materials.
- R. D. Butler and R. J. Pope: Sheet Met. Ind., 1967, 44, 579.
- W. R. D. Wilson: ‘Mechanics of sheet metal forming', 157–174; 1978, New York, Plenum Press.
- H. D. Nine: ‘Mechanics of sheet metal forming 179–207; 1978, New York, Plenum Press.
- C. Weidemann: Sheet Met. Ind., 1978, 55, 984.
- R. Pearce: ‘Tribology handbook‘, (ed. M. J. Neal), Section A43; 1973, London, Butterworths.
- W. Mils chenborn, K. Blümel, L. Meyer, and C. Strassburger: 9th Biennial Congr., IDDRG, 13–18,1976, Ann Arbor.
- S. Dinda and A. S. Kasper: ‘High strength steels — formability and applications', STP 647, 150–160; 1977, Philadelphia, Pa, American Society for Testing and Materials.
- N. P. Wolff : SAE paper no. 780392, 1978.
- R. A. Ayres and M. L. Wenner: Metall. Trans., 1979, 10A, 41.
- R. A. Ayres, H. W. Lanning, B. Taylor, R. Heimbuch, and W. G. Brazier: SAE paper no. 780180, 1978.