Measurement and compilation of materials degradation data in the COST522 programme

References

• van Liere, J. in Corrosion in Advanced Power Plants. Materials at High Temperature, 14(2/3), 7-12 (1997).
   Google Scholar
• Allen, D. H., Oakey, J. E. and Scarlin, B. The New COST Action 522 — Power Generation in the 21st Century: Ultra Efficient, Low Emission Plant. Materials for Advanced Power Engineering 1998, Lecomte-Beckers, J. et al. (eds) 1825–1838 (1998).
   Google Scholar
• Incineration of Waste, Directive 2000/76/EC of the European Parliament and of the Council of 4 December 2000
   Google Scholar
• Oakey, J. E., Allen, D. H. and Staubli, M. Power Generation in the 21st Century — The New European COST Action. EUROMAT 99 (1999)
   Google Scholar
• Scheirer, S. T. and Viswanathan, R. Evolution of Hot Section Tech-nology, ASM Materials Solution Conf. 2000.
   Google Scholar
• Schulenberg, T. New development in Land-based Gas Turbine Tech-nology. Materials for Advanced Power Engineering 1998, Lecomte-Beckers, J. et al. (eds) 849–859 (1998).
   Google Scholar
• Corrosion in Advanced Power Plants. Materials at High Temperatures, 14(2/3) (1997).
   Web of Science ®Google Scholar
• Sims, CT., Stoloff, N. S. and Hagel, W. C. Superalloys II, Wiley, New York (1987).
   Google Scholar
• Nicholls, J. R. Designing Oxidation Resistant Coatings, JoM (2000).
   Google Scholar
• Nicholls, J. R. and Wing, R. Advances in Coating Systems for Utility Gas Turbines. Materials for Advanced Power Engineering 2002, Lecomte-Beckers, J. et al. (eds), (Forschungszentrum Mich GmbH, 2002), p57
   Google Scholar
• Materials for Advanced Power Engineering 2002, Lecomte-Beckers, J. et al. Forschungszentrum Jtilich GmbH, 2002.
   Google Scholar
• Simms, N. J., Nicholls, J. R. and Oakey, J. E. Materials for Solid Fuel Fired Gas Turbines: Burner Rig and Laboratory Studies. Materials Science Forum 369-372, 833-840 (2001).
   Google Scholar
• Simms, N. J., Oakey, J. E. and Nicholls, J. R. in Proc ‘High Temperature Corrosion and Materials Chemistry: Per Kofstad Memorial Symposium’, McNallan, M., et al. (eds), The Electrochemical Society PV99-38,305-316 (2000).
   Google Scholar
• Nicholls, J. R. and Hancock, P. The Analysis of Oxidation and Hot Corrosion Data — A Statistical Approach. In High Temperature Corrosion, pp. 198-210. NACE-6, Rapp, R. A. (ed.) NACE, Houston (1983).
   Google Scholar
• Simms, N. J. and Oakey, J. E. Measurement of Erosion/Corrosion Damage to Gas Turbine Components, ASME Turbo Expo '96, Paper No. 96-GT-396, ASME, Atlanta (1996).
   Google Scholar
• Erosion/Corrosion of Advanced Materials for Coal-Fired Combined Cycle Power Generation, Final and Summary Reports on JOUF-0022 (1994).
   Google Scholar
• Draft Code of Practice for Discontinuous Corrosion Testing in High Temperature Gaseous Atmospheres, European Commission Project SMT4-CT95-2001 ‘TESTCORR’, ERA Technology, UK (2000).
   Google Scholar
• Piearcey, B. J. Materials Design Databases — Towards an Expert System. Materials Engineering in Turbines and Compressors — 3rd International Charles Parsons Turbine Conference, Newcastle (1995).
   Google Scholar
• Simms, N. J., Bregani, F., Huijbregts, W. M. M., Kokmeijer, E. and Oakey, J. E. In Materials for Advanced Power Plant 1998. pp. 163-678. Lecomte-Beckers, J. et al. (eds), Forschungszentrum Julich GmbH, Germany (1998).
   Google Scholar
• Gesmundo, F In High Temperature Materials for Power Engineering 1990, pp. 67-90, Bachelet, E., et al., (ed.), Kluwer, (1990).
   Google Scholar
• Bakker, W,T, In Proc. 7th EPRI Annual Conference on Coal Gasification, EPRI, Palo Alto, California, USA (1987).
   Google Scholar
• Proc. First International Workshop on Materials for Coal Gasification Power Plant, Petten, The Netherlands, June, 1993, in Materials for Coal Gasification Power Plant, Materials at High Temperature, 11 (1993).
   Google Scholar
• Simms, N. J., Nicholls, J. R. and Oakey, J. E. In Materials Science Forum, 369-372, 947-954 (2001).
   Google Scholar
• John, R. C., Fort W. C. and Tait, R. A. In Materials for Coal Gasification Power Plant, Special Issue of Materials at High Temperature, 11, 124–132(1993).
   Web of Science ®Google Scholar
• James, P. J. and Pinder, LW. Materials at High Temperatures, 14, 187 (1997).
   Web of Science ®Google Scholar
• Cios, K. L., Berke, L., Vary, A. and Sharma, S Soft computing methods in the design of superalloys. NASA Tech Memo 106888 (1996).
   Google Scholar
• Rosen, EM. and Silverman, D. C. Corrosion Prediction from Polarisation Scans Using an Artificial Neural Network Integrated with an Expert System. Corrosion, pp. 734-745. NACE, September (1992).
   Google Scholar
• Cai, J., Cottis, R. A. and Lyon, S. B. Phenomenological modelling of atmospheric corrosion using an artificial neural network. Corrosion Science, 41, 2001–2030 (1999).
   Web of Science ®Google Scholar
• Urquidi-Macdonald, M. and Macdonald, D. Performance Comparison Between a Statistical Model, a Deterministic Model, and an Artificial Neural Network Model for Prediction Damage from Pitting Corrosion. J. Research of National Institute Standards and Technology, 99, 495–504 (1994).
   Web of Science ®Google Scholar
• Smets, H. M. G. and Bogaerts, W. F. L. SCC Analysis of Austenitic Stainless Steels in Chloride-Bearing Water by Neural Network Techniques. Corrosion, NACE, pp. 618-623. August, (1992).
   Google Scholar
• Urquidi-Macdonald, M and Egan, P Validation and Extrapolation of Electrochemical Impedance Spectroscopy Data. Corrosion Reviews, 15, 169–194 (1997).
   Google Scholar
• Thou, S., Coleman, D and Turnbull, A. NPL Report MATC(A)21 (2001).
   Google Scholar
• Liebowitz, J (ed.), The Handbook of Applied Expert Systems, CRC, pp. 13-2 (1998).
   Google Scholar
• Tarassenko, L A Guide to Neural Computing Applications, Arnold, UK (1998).
   Google Scholar
• Kohonen, T Self-organized formation of topologically correct feature maps. Biological Cybernetics, 43, 59–69 (1982).
   Web of Science ®Google Scholar
• Simms, N. J., Smith, P. J., Encinas-Oropesa, A., Ryder, S., Nicholls, J. R. and Oakey, J. E. Development of Type II Hot Corrosion in Solid Fuel Fired Gas Turbines, In Lifetime Modelling of of High Temperature Corrosion Processes, pp. 246–260, Schiitze, M. et al. (eds), EFC No. 34 (2001).
   Google Scholar
• Henderson, P. J., Karlsson, A., Davis, C., Rademakers, P., Cizner, J., Formanek, B., Goransson, K. and Oakey, J. In-situ Fireside Corrosion Testing of Advanced Boiler Materials. Materials for Advanced Power Engineering 2002, pp. 785-800, Lecomte-Beckers, J. et al. (eds), Forschungszentrum Jtilich GmbH (2002).
   Google Scholar
• Simms, N. J., Bale, D. W., Baxter, D. and Oakey, J. E. Environmental Degradation of Gas Turbine Coatings: Towards Standardised Testing and Databases, Materials for Advanced Power Engineering 2002, pp. 73-88, Lecomte-Beckers, J. et al. (eds), Forschungszentrum Jtilich GmbH (2002).
   Google Scholar