References
- Meuronen, V. Erosion durability of steels in steam boiler heat exchanger tubes. Wear, 240, 164–167 (2000).
- Stringer, J. Practical experience with wastage at elevated temperatures in coal combustion systems. Wear, 186-187, 11-27 (1995).
- Lamarre, L. Solutions for solid-particle erosion. Electric Power Res. Inst. J., 15, 31–37 (1990).
- Rogers, P. M., Hutchings, I. M. and Little, J. A. Coatings and surface treatments for protection against low-velocity ero-sion—corrosion in fluidized beds. Wear, 186-187, 238-246 (1995).
- Sivakumar, R. and Mordike, B. L. High temperature coatings for gas turbine blades: a review. Suff. Coatings Tech., 37, 139–160 (1989).
- Huttunen-Saarivirta, E., Kalidakis, S., Stott, EH., Rohr V and Schütze, M. The erosion—corrosion resistance of uncoated and aluminized 12% chromium ferritic steels under fluidized-bed conditions at elevated temperature. Mater Corros., (submitted).
- Hogmark, S., Hammarsten, A. and Soderberg, S. On the combined effects of corrosion and erosion. In: Erosion by Solid and Liquid Impacts. Proc. of the 6th hit. Conf., Cam-bridge, UK (1983).
- Kang, C. T., Pettit, ES. and Birks, N. Mechanisms in the simultaneous erosion— oxidation attack of nickel and cobalt at high temperature. Metall. Trans., 18A, 1785–1803 (1987).
- Rishel, D. M., Pettit, ES. and Birks, N. Some principal mechanisms in the simultaneous erosion and corrosion attack of metals at high temperatures. Mater. Sci. Engng., A143, 197-211 (1991).
- Sundararajan, G. An analysis of the erosion—oxidation inter-action mechanisms. Wear, 145, 251–282 (1991).
- Stack, M. M., Stott, EH. and Wood, G. C. Review of mechan-isms erosion— corrosion of alloys at elevated temperatures. Wear, 162-164, 706-712 (1993).
- Stephenson, D. J. and Nicholls, J. R. Modelling erosive wear. Corros. Sci., 35, 1015–1026 (1993).
- Stack, M. M., Lekatos, S. and Stott, EH. Erosion—corrosion regimes: number, nomenclature and justification? Tribology Int., 28, 445–451 (1995).
- Wright, I. G., Sethi, V. K. and Markworth, A. J. A generalized description of the simultaneous processes of scale growth by high temperature oxidation and removal by erosive impact. Wear, 186-187, 230-237 (1995).
- Stephenson, D. J. and Nicholls, J. R. Modelling the influence of surface oxidation on high temperature erosion. Wear, 186-187, 284-290 (1995).
- Wellman, R. G. and Nicholls, J. R. High temperature erosion—oxidation mechanisms, maps and models. Wear, 256, 907–917 (2004).
- Natesan, K. Corrosion performance of iron aluminides in mixed-oxidant environments. Mater Sci. Engng., A258, 126-134 (1998).
- Gurrappa, I. Effect of aluminizing on the oxidation behaviour of the titanium alloy, IMI 834. Oxid. Met., 56, 73–87 (2001).
- Gauthier, V, Dettenwanger, E, Schütze, M., Shemet, V and Quadakkers, W. J. Oxidation-resistant aluminide coatings on 7-TiA1. Oxid. Met., 59, 233–255 (2003).
- Krause, H. H., Vaughan, D. A., Wright, I. G. and Carlton, H. E. Performance of high-temperature coatings in a fluidized-bed coal combustor. In: Corrosion. Proc. NACE Conf. 18-22 April, Anaheim, California, National Association of Corrosion Engineers, Houston, Texas, (1983).
- Wachtell, R. C. The basic principles of diffusion coating. In: Chapman, B. N. and Anderson J. C. (eds), Science and Technologv of Surface Coating. Academic Press, London, UK (1974).
- Rohr, V and Schütze, M. Novel low temperature diffusion coatings for heat exchanger materials. Mater. Sci. Forum, 461, 401–408 (2004).
- Hirose, S., Itoh, T., Makita, M., Fujii, S., Arai, S., Sasaki, K. and Saka, H. Defect structure of deformed Fe2A15 intermetallic compound. Intermetallics, 11, 633–642 (2003).
- Levy, A. and Hickey, G. Erosion of corrosion-resistant surface treatments on alloy steels. Wear, 108, 61–79 (1986).
- Liu, P. S. The main degradation modes of an aluminide coating on a Co-base superalloy during high-temperature oxidation in air. Oxid. Met., 58, 331–336 (2002).
- Kofstad, P. High Temperature Corrosion. Elsevier Applied Science Publishers Ltd, Essex, UK (1988).
- Shida, Y., Wood, G. C., Stott, EH., Whittle, D. P. and Bastow, B. D. Intergranular oxidation and internal void formation in Ni-40% Cr alloys. Corros. Sci., 21, 581–597 (1981).
- Gibbs, G. B. and Hales, R. The influence of metal lattice vacancies on the oxidation of high temperature materials. Corros. Sci., 17, 487–507 (1977).
- Caplan, D., Hussey, R. J., Sproule G. I. and Graham, M. J. The effect of FeO grain size and cavities on the oxidation of Fe. Corros. Sci., 21, 689–711 (1981).
- Jha, R., Haworth, C. W. and Argent, B. B. The formation of diffusion coatings of some low-alloy steels and their high temperature oxidation behaviour: Part 2. Oxidation studies. Calphad, 25, 667–689 (2001).
- Khanna, A. S. Introduction to High Temperature Oxidation and Corrosion. ASM International, Ohio, USA (2002).
- Brumm, M. W. and Grabke, H. J. Oxidation behaviour of NiAl-II. Cavity formation beneath the oxide scale on NiAl of different stoichiometries. Corros. Sci., 34, 547–561 (1993).
- Provenzano, V., Sadananda, K., Louat, N. P. and Reed, J. R. Void formation and suppression during high temperature oxidation of MCrAlY-type coatings. Suff. Coat. Technol., 36, 61–74 (1988).
- Bricknell, R. H. and Woodford, D. A. The mechanism of cavity formation during high temperature oxidation of nickel. Acta Met., 30, 257–264 (1982).
- Palm, M. The Al—Cr—Fe system — phases and phase equili-bria in the Al-rich corner. J Alloys Comp., 252, 192–200 (1997).
- Audier, M., Durand-Charre, M., Laclau, E. and Klein, H. Phase equilibria in the Al—Cr system. J Alloys Comp., 220, 225–230 (1995).
- Jun, J. H., Jun, J. H. and Kim, K. Y. Degradation behaviour of Al—Fe coatings in wet-seal area of molten varbonate fuel cells. Power Sources, 112, 153–161 (2002).
- Agiiero, A. and Muelas, R. Steam oxidation of slurry alumi-nide coatings on ferritic steels for advanced coal-fired steam power plants. Mater. Sci. Forum, 461, 957–964 (2004).
- Stein-Fechner, K., Konys, J. and Wedemeyer, O. Investigations on the transformation behaviour of the intermetallic phase (Fe, Cr)2A15 formed on MANET II steel by aluminizing. J Nuclear Mater., 249, 33–38 (1997).
- Deevi, S. C. and Sikka, V. K. Nickel and iron aluminides: an overview on properties, processing, and applications. Inter-metallics, 4, 357–375 (1996).
- Schlenker, T., Luis Valero, M., Schock, H. W. and Werner, J. H. Grain growth studies of thin Cu(In, Ga)Se2 films. J Crystal Growth, 264, 178–183 (2004).
- Liu, E and Kirchheim, R. Comparison between kinetic and thermodynamic effects on grain growth. Thin Solid Films, 466, 108–113 (2004).
- Fasching, A. A., Edwards, G. R. and David, S. A. Grain growth of an iron aluminide alloy. Scripta Met. Mater., 30, 1003 — 1008 (1994).