Measurement of flow stress at high temperature in solid torsion tests

References

• Roebuck, B., Loveday, M. S., Chastel, Y, Fiorucci, G. and Dal Negro, T. High Temperature Solid Torsion Tests. NPL Mea-surement Good Practice Guide No 58, ISSN 1368-6550 (May 2003).
   Google Scholar
• Jonas, J. J., Montheillet, E and Shrivastava, S. The elastic unloading of torsion bars subjected to prior plastic deforma-tion. Scripta Metall., 19, 235–240 (1985).
   Google Scholar
• Jonas, J. J. Modelling the length changes that take place during torsion testing. Special Issue. Int. J Mech. Sci., 35, 1065–1077 (1993).
   Web of Science ®Google Scholar
• Baczynski, J. and Jonas, J. J. Texture Development During the Torsion Testing of Iron and two IF Steels. Acta Mater., 44, 4275–4288 (1996).
   Google Scholar
• Bocher, P., Jonas, J. J. and Montheillet, E Nucleation and growth during dynamic recrystallization of a 304 stainless steel. 35th Annual Conference of Metallurgists, Montréal, Québec, Canada (1996), in Hot Workability of Steels and Light Alloys-Composites, Met. Soc. CIM, Montréal, pp. 443-450 (1996).
   Google Scholar
• Yue, S., Bai, D. Q. and Jonas, J. J. The influence of static and dynamic recrystallisation on mean flow stress and grain size in steel. Can. Metall. Quarterly, 33 (2), 145-154 (1994).
   Web of Science ®Google Scholar
• Barraclough, D. R., Whittaker, H. J., Nair, K. D. and Sellars, C. M. Effect of specimen geometry on hot torsion test results for solid and tubular specimens. J Testing Evaluation, 220-228 (1973).
   Google Scholar
• Barraclough, D. R. and Sellars, C. M. The effects of varying deformation conditions during hot torsion testing. Proc. Conf Mechanical properties of materials at high rates of strain, Oxford, 111-123 (1974).
   Google Scholar
• Barnett, M. R. and Montheillet, E The generation of new high angle boundaries in aluminium during hot torsion. Acta Materialia, 50, 2285–2296 (2002).
   Web of Science ®Google Scholar
• Barnett, M. R. and Montheillet, E The generation of new high angle boundaries during the hot torsional deformation of aluminium. First Joint Int. Conf on Reciystallization and Grain Growth (ReX-GG 2001), Aachen, pp. 869-874 (2001).
   Google Scholar
• Perrin, M., Combres, Y, Levaillant, C. and Montheillet, E Constitutive relations for a commercially pure alumi-nium from room temperature to 500°C. 8th Riso Inter-national Symposium on Metallurgy and Materials Science Constitutive Relations and Their Physical Basis, pp. 479-484, Rises National Laboratory, Roskilde, Danemark (1987).
   Google Scholar
• Malcor, J.-G., Montheillet, E and Champin, B. Mechanical and microstructural behaviour of Ti-6%A1-4%V alloy in the hot working range. 5th International Conference on Titanium, pp. 1495-1502, Deutsche Gesellschaft fur Metallkunde, Munich (1985).
   Google Scholar
• Montheillet, E, Cohen, M. and Jonas, J. J. Axial stresses and texture development during the torsion testing of Al, Cu and alpha-Fe. Acta Metall., 32, 2077–2089 (1984).
   Google Scholar
• Montheillet, E, Gilormini, P. and Jonas, J. J. Relation between axial stresses and texture development during torsion testing: a simplified theory. Acta Metall., 33, 705–711 (1984).
   Google Scholar
• Malcor, J.-G. and Montheillet, E Mechanical and microstruc-tural behaviour of Ti-6%A1-4%V in the hot working range. 4th Riso International Symposium on Metallurgy and Materials Science Deformation of Multiphase and Particle Containing Materials, pp. 399-404, Rises National Laboratory, Roskilde, Danemark (1983).
   Google Scholar
• Malcor, J.-G. and Montheillet, E Loi de comportement de l'alliage de titane Ti-6%A1-4%V dans le domaine du forgeage chaud. Mém. Etud. Sci. Rev. Métall., 80, 89–103 (1983).
   Google Scholar
• Malcor, J.-G. and Montheillet, E Prise en compte de l'hétér-éité de temperature dans l'interprétation de l'essai de torsion a chaud. Materiaux et Techniques, 12, 51–57 (1983).
   Google Scholar
• Regammi, G., Perdrix, C. and Montheillet, E Effet de mémoire dans le comportement a chaud de l'aluminium &forme par torsion a vitesse variable. Sciences et Techniques de l'Armement, 57, 285-302 (1983). Cahiers du Groupe Franfais de Rhéologie, Applications de la rhéologie aux problémes de fabrication industrielle. 6, 45–57 (1983).
   Google Scholar
• Perdrix, C., Perrin, M. and Montheille, E Comportement mécanique et evolution structurale de l'aluminium au cors d'une deformation a chaud de grande amplitude. Mém. Etud. Sci. Rev. Métall., 78, 309–320 (1981).
   Google Scholar
• Perdrix, C. and Montheillet, E An analysis of the behaviour of aluminium during a strain rate change. 5th International Conference on the Strength of Metals and Alloys (IcsmA 5), pp. 571-576, Pergamon Press, Oxford (1979).
   Google Scholar
• Thou, M. and Clode, M. P. Hot torsion tests to model the deformation behaviour of aluminium alloys at hot working temperatures. J Mat. Processing Technology, 72, 75–85 (1997).
   Google Scholar
• Thou, M. and Clode, M. P. Modelling of high temperature viscoplastic flow behaviour of aluminium alloys by hot torsion testing. Materials Science and Technology, 13, 818–824 (1997).
   Web of Science ®Google Scholar
• Thou, M. and Clode, M. P. A finite element analysis for the least temperature in hot torsion test specimen. Finite Elements in Analysis and Design, 31, 1–14 (1998).
   Web of Science ®Google Scholar
• Thou, M. and Clode, M. P. Thermal analysis of the torsion test under hot working conditions. Computational Materials Science, 9, 411–419 (1998).
   Web of Science ®Google Scholar
• Thou, M. and Clode, M. P. Constitutive equations for model-ling flow softening due to dynamic recovery and heat genera-tion during plastic deformation. Mechanics of Materials, 27, 63–76 (1998).
   Web of Science ®Google Scholar
• Thou, M. and Clode, M. P. Effect of specimen geometry on temperature rise and flow behaviour of aluminium in hot torsion testing. Materials and Design, 17, No. 5/6, 275–281 (1996).
   Web of Science ®Google Scholar
• Thou, M., Ahmad, H. Y. and Clode, M. P. Thermal effects on flow properties of Aluminium alloys. J Thermal Stresses, 21, 509–518 (1998).
   Web of Science ®Google Scholar
• Gavrus, A., Massoni, E. and Chenot, J. L. Computer Aided Rheology For Non Linear Large Strain Thermo-Viscoplastic Behaviour Formulated As An Inverse Problem, Isip '94, Paris, France, Bui and Al. (eds.), Balkema, 123-30 (1994).
   Google Scholar
• Gavrus, A., Massoni, E. and Chenot, J. L. Computer Aided Rheology For Constitutive Parameter Identification, Complas Iv, Barcelona, Spain, pp. 755-66. Owen et al. (eds), Pineridge Press: Swansea, UK (1995).
   Google Scholar
• Gavrus, A., Massoni, E. and Chenot, J. L. Constitutive Para-meter Identification Using A Computer Aided Rheology Approach, Numiform'95, Ithaca, USA, pp. 563–568. Shen et al. (eds.), A. A. Balkema Edition (1995).
   Google Scholar
• Gavrus, A., Massoni, E. and Chenot, J. L. The analysis of inelastic behaviour formulated as an inverse rheological approach. Measurement Science and Technologies, 9, 848–863 (1998).
   Web of Science ®Google Scholar
• Dal Negro, T., D'Alvise, L., Chastel, Y. and Massoni, E. Inverse technique for automatic identification of rheological parameters in combined tension-torsion and compression conditions. Proc. of the 4th ESAFORM Conf on Materials Forming, pp. 419-422. April 23-25, Liège (2001).
   Google Scholar
• Gaffard, V., Chastel, Y, Dal Negro, T. and Lerale, A. Inverse analysis of the torsion test for metallurgical purposes. Euro-therm 68, Poitiers, (full text on CD) March 2001.
   Google Scholar
• Roebuck, B., Lord, J. D., Brooks, M., Loveday, M. S., Sellars, C. M. and Evans, R. W. Measuring Flow Stress in Hot Axisym-metric Compression Tests. Measurement Good Practice Guide No 3, NFL CMMT(GPG)003. Revised Summer 2002 (1997).
   Google Scholar
• Roebuck, B., Lord, J. D., Brooks, M., Loveday, M. S., Sellars, C. M. and Evans, R. W. Measurement of Flow Stress in Hot Axisymmetric Compression Tests. Mater. High Temp., 23, xx—xx (2006).
   Google Scholar
• Lacey, A. J., Loveday, M. S., Mahon, G. J., Roebuck, B., Sellars, C. M. and van der Winden, M. R. Measuring Flow Stress in Plane Strain Compression Tests. NPL Measurement Good Practice Guide No 27. NFL, April 2000, revised Summer 2002.
   Google Scholar
• Loveday, M. S., Mahon, G. J., Roebuck, B., Lacey, A. J., Pal-miere, E. J., Sellars, C. M. and van der Winden, M. R. Measure-ment of Flow Stress in Plane Strain Compression Tests. Mater High Temp., 23 (2), 85-118 (2006).
   Google Scholar
• Unwin, WC. The testing of materials of construction. Long-mans, Green and Co, London (1910).
   Google Scholar
• Loveday, M. S. High temperature and time-dependent mechan-ical testing—an historical introduction. In Measurement of High Temperature Mechanical Properties of Materials, pp. 1-12. Loveday, M. S., Day, M. F. and Dyson, B. F. (eds.), HMSO, London (1982).
   Google Scholar
• Tapsell, H. J. and Bradley, J. Mechanical tests at high tempera-tures on a non-ferrous alloy of nickel and chromium. Engi-neering, 120, 614-615, 648-649 and 746-747 (1925).
   Google Scholar
• Henderson, J. and Dyson, B. F. Multi-axial creep testing, Chapt 11, 171-184, Measurement of High Temperature Mechanical Properties of Materials, Loveday, M. S., Day, M. F. and Dyson, B. F. (eds.), HMSO, London (1982).
   Google Scholar
• Avramovic-Cingara, G., McQueen, H. J. and Perovic, D. D. Comparison of torsion and compression constitutive analyses for elevated temperature deformation of Al—Li—Cu—Mn alloy. Materials Science and Technology, 19, 11–19 (2003).
   Web of Science ®Google Scholar
• Kaspar, R., Muller, P. M., Philipp, E-D. and Backmann, G. Hot stress—strain curves of steel determined by different kinds of deformation. Steel Research, 64 (12), 611-617 (1993).
   Google Scholar
• Swift, H. W. Engineering, 164, 253–257 (1947).
   Google Scholar
• Hardwick, D. and McG Tegart, W. J. Mem. Sci. Rev. Metall., 58, 869–880 (1961).
   Web of Science ®Google Scholar
• Stilwe, H. P. and Turck, H. Z. Metall., 55, 699–703 (1964).
   Google Scholar
• Morozumi, E Nippon Kokan Tech. Rev., (4) 67 (1965).
   Google Scholar
• Billington, E. W. Nonlinear response of various metals: Perma-nent length changes in twisted tubes. J Appl. Phys., 10, 51 (1977).
   Google Scholar
• Shrivastava, S., Jonas, J. J. and Toth, L. S. The inverse Swift effect in pretwisted and freely extended wires. Modelling the deformation of solids, pp. 303-307. Lowe, T. C., Rollett, A. D., Follansbee, P. S. and Daehn, G. S. (eds.), The Minerals, Metals and Materials Soc. (1991).
   Google Scholar
• Johnson, G. R. Dynamic analysis of torsion test specimen including heat conduction and plastic flow. ASME J Eng. Mat. and Technology, 103, 201–206 (1981).
   Web of Science ®Google Scholar
• Sheppard, T. and Wright, D. S. Met. Technol., 6, 215–223 (1979).
   Web of Science ®Google Scholar
• Backofen, WA. and Fields, D. S. Am. Soc. Test. Mater. Proc., 57, 1259 (1957).
   Google Scholar
• McQueen, H. J. and Hocket, J. E. Metall. Trans., 1, 2997–3004 (1970).
   Web of Science ®Google Scholar
• Forestier, R., Massoni, E. and Chastel, Y. Estimation of constitutive parameters using an inverse method couplied to a 3D finite element software. Journal of Materials Processing Technology, 125-126, 594-601 (2002).
   Google Scholar
• Dieter, G. E. Mechanical Metallurgy, (Chapter 2, stress—strain relationships) and pp. 539–541 (compression tests). SI Metric Edition, McGraw-Hill, pp. 18-71 (1989).
   Google Scholar
• Harris, J. N. Mechanical Working of Metals: Theory and Practice. Int. Series on Mat Sci and Technology, 36, Pergamon (1983).
   Google Scholar
• Kandil, E Testpiece alignment device. Private communication, NFL (2001).
   Google Scholar
• Dixon, M. J. Dynamic force measurements. In Materials Metrology and Standards for Structural Performance, Chap. 4, pp. 55-80. Dyson, B. F., Loveday, M. S. and Gee, M. G. (eds.), Chapman and Hall (1995).
   Google Scholar
• Albright, J. Dynamic strain measurements. In Materials Metrology and Standards for Structural Performance, Chap. 6, pp. 114-133. Dyson, B. F., Loveday, M. S. and Gee, M. G. (eds.), Chapman and Hall (1995).
   Google Scholar
• Colclough, A. Methods of practical thermometry in the range 0 to 3000°C. In Measurement of High Temperature Mechan-ical Properties of Materials. Loveday, M. S., Day, M. F. and Dyson, B. F. (eds.), HMSO, London (1982).
   Google Scholar
• Devaux, M. P. E. The practical realization of temperature mea-surement standards in high temperature mechanical testing. In Measurement of High Temperature Mechanical Properties of Materials, Loveday, M. S., Day, M. F. and Dyson, B.E (eds.), HMSO, London (1982).
   Google Scholar
• Loveday, M. S., Day, M. F. and Dyson, B. F. Measurement of High Temperature Mechanical Properties of Materials, HMSO, London (1982).
   Google Scholar
• Foster, S. R. Simulation of Hot Rolling of Low Carbon Steel. PhD Thesis, University of Sheffield (1981).
   Google Scholar
• Hand, R. J., Foster, S. R. and Sellars, C. M. Temperature changes during hot plane strain compression testing. Materials Science and Technology, 16, 442–450 (2000).
   Web of Science ®Google Scholar
• Rietman, B. Numerical analysis of inhomogeneous deforma-tion in plane strain compression. PhD thesis, University of Twente, Netherland (1999).
   Google Scholar
• Bell, S. A Beginner 's Guide to the Uncertainty of Measurement. Good Practice Guide No. 11, National Physical Laboratory (1999).
   Google Scholar
• Taylor, B. N. and Kuyatt, C. E. Guidelines for evaluating and expressing uncertainty of 1VIST measurement results. Download from http://physics.nist.gov. (1993).
   Google Scholar
• NAMAS. The Expression of Uncertainty and confidence in Measurement, NAMAS MS 3003. NAMAS, Feltham, TW13 4UN, UK (1997).
   Google Scholar
• Birch, K. Estimating Uncertainties in Testing. Measurement Good Practice Guide No 36, BMTA/NPL (2001).
   Google Scholar
• Kandil, EA., Lord, J. D., Bullough, C. K., Georgsson, P., Legendre, L., Money, G., Mulligan, E., Fry, A. T., Gorley, T. A. E. and Lawrence, K. M. The UNCERT Manual of Codes of Practice for the Determination of Uncertainties in Mechan-ical Tests on Metallic Materials. [CD-ROM,—available from NPL] ISBN 0-0946754-41-1 (Current available on the web at http://www.npl.co.uldnpl/cmmt/projects/uncert/index.html) (2000).
   Google Scholar
• Robson, H. Temperature measuring techniques in a large creep laboratory J Phys. E. Sci. Instruments, 10, 384–389 (1977).
   Google Scholar
• Osgerby, S. and Loveday, M. S. Creep Laboratory Manual. NPL Report DMM(A)37 (1992).
   Google Scholar
• Forestier, R., Massoni, E. and Chastel, Y. Estimation of constitutive parameters using an inverse method coupled to a 3D finite element software. Journal of Materials Processing Technology, 125-126, 594-601 (2002).
   Google Scholar
• Gavrus, A., Massoni, E. and Chenot, J. L. An inverse analysis using a finite element model for identification of rheological parameters. Journal of Materials Processing Technology, 60, 447–454 (1996).
   Web of Science ®Google Scholar