References
- A. KUMAR, M. NASRALLAH, and D. L. DOUGLASS: Oxid. Met., 1974, 8, 227–263.
- C. S. GIGGINS and F. S. PETTIT: ‘Oxide scale adherence mechanisms and the effects of yttrium, oxide particles and externally applied loads on the oxidation of NiCrAl and CoCrAl alloys', Report PWA-5364, Pratt and Whitney, East Hartford, Conn., 1975.
- F. S. PETTIT: in Course on ‘High temperature corrosion and use of coatings for protection’, Linkoping, Sweden, Aug. 1982, University of Link6ping LiTH.
- D. H. BOONE: Lawrence Berkeley Laboratory, Berkeley, Cal., Oct. 1982, personal communication.
- B. ANDERSSON et al.: ‘A study of electron beam evaporated and plasma sprayed FeCrAlY coatings for high temperature corrosion protection’, Report LiTH-IFM-IS-75, University of Linkoping, Sweden, 1981.
- C. BURMAN and T. ERICSSON: in ‘High-temperature protective coatings’, (ed. S. C. Singhal), 51-59; 1983, Warrendale, Pa, Metallurgical Society of AIME.
- C. S. WUKUSICK and J. F. COLLINS: Mater. Res. Stand., 1964, 4, 637–646.
- C. S. GIGGINS and F. PETTIT: J. Electrochem. Soc., 1971, 118, (11), 1782–1790.
- G. R. WALLWORK and A. Z. HED: Oxid. Met., 1972, 3, 243–250.
- J. NOWOK: Oxid. Met., 1982, 18, (1/2), 1-17.
- C. S. GIGGINS and F. PETTIT: Oxid. Met., 1980, 14, 363–413.
- W. K. HALNAN and D. LEE: in ‘High-temperature protective coatings’, (ed. S. C. Singhal), 3-12; 1983, Warrendale, Pa, Metallurgical Society of AIME.
- I. KVERNES: Oxid. Met., 1973, 6, (1), 45–64.
- J. K. TIEN and F. PETTIT: Metall. Trans., 1972, 3, 1587–1599.
- D. P. WHITTLE and J. STRINGER: Philos. Trans. R. Soc., 1981, 295A, 309–329.
- D. DELAUNEY and A. M. HUNZ: J. Mater. Sci., 1982, 17, 2027–2036.
- C. S. GIGGINS and F. S. PETTIT: ‘Hot corrosion degradation of metals and alloys - a unified theory’, PWA Report FR-11545, Pratt and Whitney, East Hartford, Conn., 1979.
- Diffusion Defect Data, 1975, 11, 54.
- D. H. BOONE: ‘Airco Temescal data sheets’, Airco Inc., Berkeley, Cal., 1977.
- C. BURMAN and T. ERICSSON: in ‘Mechanical behaviour of metals - IV', (ed. J. Carlsson and N. G. Ohlson), Vol. 1, 409-420; 1983, Stockholm, Royal Institute of Technology.
- Y. LINDBLOM: in ‘High temperature alloys for gas turbines’, (ed. D. Coutsouradis et al.), 285; 1978, London, Applied Science.
- Y. LINDBLOM and G. ENGBERG: in ‘Creep damage and fracture’, (ed. R. Brunetaud et al.), 447; 1982, Dordrecht, Reidel.