References
- R. KOMANDURI and R. H. BROWN: J. Eng. Ind. (Trans. ASME), 1981, 103, 33–51.
- W. JOHNSON: ‘Impact strength of materials’, 208; 1972, London, Edward Arnold.
- J. C. LEMAIRE and W. A. BACKOFEN: Metall. Trans., 1972, 3, 477–481,
- N. UEDA and T. MATSUO: Ann. CIRP, 1982, 31, (1), 81–84.
- K. NAKAYAMA: in Proc. Int. Conf. on ‘Production engineering’, Tokyo, Mar. 1974, Part 1, 572-577.
- Y. mATsumoro: PhD Dissertation, Purdue University, 1983.
- B. F. VON TURKOVICH and S. CALVO: in ‘Machine tool design and research’, Part 2, 1051; 1969, Oxford, Pergamon Press.
- H. C. ROGERS: Ann. Rev. Mater. Sci., 1979, 9, 283–311.
- R. F. RECHT: J. Appl. Mech. (Trans. ASME), 1964, 31, 189–193.
- S. RAMALINGHAM and J. T. BLACK: Metall. Trans., 1973, 4, 1103–1112.
- J. T. BLACK: J. Eng. Ind. (Trans. ASME), 1972, 94, (1), 307–316.
- J. T. BLACK: J. Eng. Ind. (Trans. ASME), 1971, 93, (2), 507–526.
- M. C. SHAW: Int. J. Mech, Sci., 1980, 22, 673–686.
- K. F. SULLIVAN, P. K. WRIGHT, and P. D. SMITH: Met. Technol., 1978, 5, 181–189.
- J. A. BAILEY, S. JEELANI, and S. E. BECKER: J. Eng. Ind. (Trans. ASME), 1976, 98, (3), 999–1007.
- M. FIELD, J. F. KAHLES, and J. T. CAMMETT: Ann. CIRP, 1972, 21, (2), 219–238.
- D. V. WILSON and J. H. ANDREW et al.: J. Iron Steel Inst., 1950, 165, Sections v—vii, 376-395.
- H. O. McINTIRE and G. K. MANNING: Met. Prog., 1958, 74, 94–95.
- P. A. THORNTON and F. A. HEISER: Metall. Trans., 1971, 2, 1469–1499.
- C. ZENER and J. H. HOLLOMON: Appl. Phys., 1944, 15, 22–32.
- R. C. GLENN and w. C. LESLIE: Metall. Trans., 1971, 2, 2945–2947.
- A. L. WINGROVE: Aust. Inst. Met., 1971, 16, (1), 67–70.
- D. M. TURLEY: Mater. Sci. Eng., 1975, 19, 79–86.
- H. EDA, K. KISHI, and S. HASHIMOTO: Bull. Jpn Soc. Mech. Eng., 1981, 24, (190), 743–747.
- B. T. CHAO and K. J. TRIGGER: Trans. ASME, 1951, 73, 777–792.
- H. EDA, K. KISHI, and H. HASHIMOTO: in ‘Cutting tool materials’, 265-286; 1980, Metals Park, Ohio, American Society for Metals.
- N. NARUTAKI and Y. YAMANE: Ann. CIRP, 1979, 28, 23–28.
- C. S. SHARMA, W. B. RICE, and R. SALMON: Ann. CIRP, 1971, 19, 545–549.
- R. MILOVIC, E. F. SMART, and M. L. H. WISE: Mater. Sci. Technol., 1986, 2, 59–68.
- R. KOMANDURI: ‘Further work on chip formation characteristics when machining titanium alloys’, Air Force Systems Command Air Force Wright Aeronautical Labora-tories, SRD-80-118, 1980.
- J. L. HATJ-BRACAMONTE: Met. Technol., 1981, 8, 447–450.
- J. L. HAU-BRACAMONTE: Metall. Trans., 1983, 14A, 1743–1745.
- Z. NISHIYAMA: ‘Martensitic transformation', 467; 1978, New York, Academic Press.