References
- A-. M. SAGE: Met. Technol., 1976, 3, 65.
- R. PHILLIPS and I. A. CHAPMAN: J. Iron Steel Inst., 1966, 204, 615.
- M. UMEMOTO, Z. H. GUO, and I. TAMURA: Mater. Sci. Technol., 1987, 3, 249.
- J. H. BUCHER and J. D. GROZIER: Met. Eng. Q., November 1965, 58, 1–60.
- F. B. PICKERING: in 'Hardenability concepts with applications to steels', (ed. D. V. Doane and J. S. Kirkaldy); 1978, Warrendale, PA, The Metallurgical Society of AIME.
- T. GLADMAN, B. HOLMES, and I. D. McIVOR: in ‘Effect of second-phase particles on the mechanical properties of steel’, 68; 1971, London, The Iron and Steel Institute.
- N. JENSFELT: Jerkontorets Ann., 1965, 145, 505.
- A. E. ZAKHAROV, B. P. ZUER, D. A. STOROJHENKO, A. F. TODUROV, and A. A. AZARICEVICH: Steel USSR, 1971, 638.
- J. D. GROZIER: in Proc. Conf. 'Microalloying 75', (ed. M. Korchynsky, 241; 1977, New York, Union Carbide Corporation.
- M. FUKUDA, T. HASHIMOTO, and K. KUNISHIGE: in PrOC. Conf. 'Microalloying 75', (ed. M. Korchynsky, 136; 1977, New York, Union Carbide Corporation.
- C. oucHt, T. OKITA, and s. YAMAMOTO: Trans. Iron and Steel Inst. Jpn, 1982, 22, 608.
- K. TSUKADA, T. OHKITA, C. OUCHI, T. NAGAMINE, K. HIRABE, and K. YAKO: ‘Application of on-line accelerated cooling (OLAC) to steel plate — development of OLAC’ (Part 1), Overseas no. 35, p. 24, Nippon Kokan Technical Report, 1982.
- J. S. DISTL, R. KASPAR, and U. ZEISLMAIR: Steel Res., 1987, 58, 514.
- A. M. SAGE, D. M. HAYES, C. C. EARLEY, and E. A. ALMOND: Met. Technol., July 1976, 3, 293.
- E. A. ALMOND and R. S. IRANI: Met. Technol., September 1981, 8, 339.
- F. B. PICKERING and T. GLADMAN: ‘Metallurgical developments in carbon steels’, 10; 1963, London, The Iron and Steel Institute.
- N. J. PETCH: J. Iron Steel Inst., 1953, 174, 25.
- E. 0. HALL: Proc. Phys. Soc., 1951, B64, 742.
- W. B. MORRISON, B. MINTZ, and R. C. COCHRANE: in Proc. Product Technology Conf. on ‘Controlled processing of HSLA steels’, University of York, 1976, BSC, preprint paper no. 1.
- T. SIWECKI, A. SANDBERG, W. ROBERTS, and R. LOGNEBORG: in 'Thermomechanical processing of microalloyed austenite', (ed. A. J. De Ardo et al.), 163; 1982, Warrendale, PA, The Metallurgical Society of AIME.
- J. M. CHILTON and M. J. ROBERTS: Metall. Trans., 1980, 11A, 1711.
- R. K. AMIN, M. KORCHYNSKY, and E B. PICKERING: Met. Technol., 1981, 8, 250.