References
- R. L. FLEISCHER, D. M. DIMIDUK, and H. A. LIPSITT: 'Technical information series', Report 88CRD326, GE Research and Development Center, Materials Research Laboratory, OH, December 1988.
- H. A. LIPSITT: (ed. C. C. Koch et al), in MRS Symp. Proc. on 'High temperature ordered intermetallic alloys', Vol. 39, 351-364; 1985, Pittsburgh, PA, Materials Research Society.
- J. M. LARSEN, K. A. WILLIAMS, S. J. BALSONE, and M. A. STUCKE: 'High temperature aluminides and intermetallics', (ed. S. H. Whang et al.), 521-556; 1990, Warrendale, PA, The Minerals, Metals and Materials Society.
- Y.-W. KIM: J. Mater., 1989, 41, (7), 24-30.
- R. G. ROWE: 'High temperature aluminides and intermetallics', (ed. S. H. Whang et al. ), 375-401; 1990, Warrendale, PA, The Minerals, Metals and Materials Society.
- s. M. SASTRY and H. A. LIPSITT: Metall. Trans., 1977, 8A, 1543–1552.
- D. KOSS, D. BANERJEE, D. A. LUKASAK, and A. K. GOGIA: 'High temperature aluminides and intermetallics', (ed. S. H. Whang et al.), 175-196; 1990, Warrendale, PA, The Minerals, Metals and Materials Society.
- P. L. MARTIN, H. A. LIPSITT, N. T. NUTIFER, and I. C. WILLIAMS: in Proc. Int. Conf. 'Titanium '80 science and technology', Vol. 2, (ed. H. Kimura and O. Izumi), 1245-1254; 1980, Warrendale, PA, The Metallurgical Society of AIME.
- C. H. WARD: Int. Mater. Rev., 1993, 38, (2), 79–101.
- R. STRYCHOR, J. C. WILLIAMS, and W. A. SOFFA: Metall. Trans., 1988, 19A, 225–234.
- J. H. PEREPEZKO, Y. A. CHANG, L. E. SEITZMAN, I. C. LIN, N. R. BONDA, T. J. JEWETT, and J. C. MISHURDA: 'High temperature aluminides and intermetallics', (ed. S. H. Whang et al.), 19-47; 1990, Warrendale, PA, The Minerals, Metals and Materials Society.
- M. J. KAUFMAN, T. F. BRODERICK, C. H. WARD, J. K. KIM, R. G. ROWE, and F. H. FADES: in Proc. Int. Conf. 'Sixth world conference on titanium', (ed. P. Lacombe et al.), 985-990; 1988, les Ulis, France, les editions de physique, Société Francaise de Métallurgie.
- L. A. BENDERSKY and W. J. BOETTINGER: 'High-temperature ordered intermetallic alloys III', (ed. C. T. Liu et al.), Vol. 133, 45-50; 1989, Pittsburgh, PA, Materials Research Society.
- J. A. PETERS and C. BASSI: Scr. Metall. Mater., 1990, 24, 915–920.
- M. J. CIESLAK, T. J. HEADLEY, and W. A. BAESLACK HI: Metall. Trans., 1990, 21A, 1273–1286.
- H. T. WEYICAMP, D. R. BAKER, D. M. PAXTON, and M. J. KAUFMAN: Scr. Metall. Mater., 1990, 24, 445–450.
- H. T. KESTNER-WEYKAMP, C. H. WARD, T. F. BRODERICK, and M. J. KAUFMAN: Scr. Metall., 1989, 23, 1697–1702.
- D. BANERJEE, T. K. NANDY, A. K. GOGIA, and K. MURALEEDHARAN: in Proc. Int. Conf. 'Sixth world conference on titanium' (ed. P. Lacombe et al.), 1091-1096; 1988, les Ulis, France, les editions de physique, Société Franeaise de Métallurgie.
- D. BANERJEE, A. K. GOGIA, T. K. NANDY, and v. A. JOSH': Acta Metall., 1988, 36, (4), 871–882.
- L. M. HSIUNG and H. N. G. WADLEY: Scr. Metall. Mater., 1992, 26, 35–40.
- B. J. MARQUARDT, A. I. KAHVECI, and V. M. SAMPLE: 'GE aircraft engines, interim report No. 3, contract F33615-89-C-5615', Engineering Materials Technology Laboratories, Cincinnati, OH, 1991.
- K. MURALEEDHARAN, A. K. GOGIA, T. K. NANDY, D. BANERJEE, and S. LELE: Metall. Trans., 1992, 23A, 401–415.
- M. LONG: MSc thesis, Department of Mechanical Engineering, Clemson University, SC, December 1992.
- P. K. CHAUDHURY, M. LONG, and H. J. RACK: Mater. Sci. Eng., 1992, A152, 37–40.
- R. HULTGREN, P. D. DESAI, D. T. HAWKINS, M. GLEISER, K. K. KELLEY, and D. D. WAGMAN: 'Values corrected to the 1968 International Practical Temperature Scale (IPTS-68)'; 1973, Metals Park, OH, ASM.
- H. Hu and R. S. CLINE: Trans. Metall. Soc. AIME, 1968, 242, 1013–1020.
- 'Least squares unit cell refinement' program (after Appleman and Evans, 1973), implementation by R. G. Garvey, North Dakota State University, Fargo, ND, June 1984.
- K. MURALEEDHARAN, S. V. NAGENDER NAIDU, and D. BANERJEE: Scr. Metall. Mater., 1990, 24, 27–32.
- L. M. HSIUNG, W. cm, and H. N. G. WADLEY: Acta Metall. Mater., 1992, 40, (11), 3035–3049.
- R. C. MACICENZM: 'Differential thermal analysis', Vol. 2; 1972, London and New York, Academic Press.
- K. MURALEEDHARAN and D. BANERJEE: Metall. Trans., 1989, 20A, 1139–1142.