321
Views
80
CrossRef citations to date
0
Altmetric
Review

Structural performance of discontinuous metal matrix composites

Pages 709-726 | Published online: 19 Jul 2013

References

  • T W. Wand R J. WITHERS: ‘An introduction to metal matrix composites’; 1993, Cambridge, Cambridge University Press.
  • T. W. CHOU, A. KELLY, and A. OKURA: Composites, 1985, 16, 187.
  • D. J. LLOYD: Int. Met. Rev., 1994, 39, 1.
  • A. R. BEGG: Powder Metall. , 1993, 36, 107.
  • G. DOREY, C. J. PEEL, and P. T. CURTIS: J. Aero. Eng., 1994, 208, 1.
  • F. H. FROES: Mater. Sci. Eng. , 1994, A184, 119.
  • Product update, Magnesium Elektron, Manchester, UK, 1994.
  • A. LUO: Metall. Mater. Trans., 1995, 26A, 2445.
  • I. J. POLMEAR: Mater. Sci. Technol., 1994, 10, (1), 1–16.
  • I. SINCLAIR: PhD thesis, University of Cambridge, 1996.
  • J. WHITE, I. G. PALMER, I. R. HUGHES, and S. A. COURT: in Aluminium—lithium alloys', Proc. 5th Int. Conf. on Al—Li alloys, (ed. T. H. Sanders and E. A. Starke), Vol. 3, 1635; 1989, Birmingham, MCEP.
  • P. J. WITHERS, W. M. STOBBS, and O. B. PEDERSEN: Acta Metall. , 1989, 37, 3061.
  • T. W. CLYNE: Mater. Sci. Eng. , 1989, A122, 183.
  • J. C. HALPIN and s. w. TSAI: ‘Environmental factors in composite design’, Report AFML-TR-67-423, Air Force Materials Laboratory, Farnborough, Hants., 1967.
  • P. J. WITHERS: Philos. Mag. A, 1989, 59, 759.
  • Y. TAKAO and M. TAYA: J. Compos. Mater., 1987, 21, 140.
  • H. JEONG, D. HSU, R. SHANNON and R K. LIAW: Metall. Trans., 1994, 25A, 799.
  • P. B. PRANGNELL, T. DOWNES, P. J. WITHERS, and W. M. STOBBS: Acta Metall. Mater., 1994, 42, 3425.
  • N. GANESAN and S. VIJAYARANGAN: COMpUt. StrtiCt., 1993, 46, 1021.
  • P. M. NOAKER: Manuf. Eng., 1993, 111, 73.
  • M. EBISAWA, T. HARA, T. HAYASHI, and H. USHIO: SAE Trans. , 1991, 100, 826.
  • H. R. and F. CHE SAE Trans. , 1991, 100, 817.
  • T. CHRISTMAN, A. NEEDLEMAN, and S. SURESH: Acta Metall. , 1989, 37, 3029.
  • G. L. POVIRK, A. NEEDLEMAN, and S. R. Nun: Mater. Sci. Eng. , 1991, A132, 31.
  • M. JAIN, S. R. McEWEN, and L. wu: Mater. Sci. Eng. , 1994, A183, 111.
  • W. J. CLEGG: Acta Metall. , 1988, 36, 2141.
  • A. LEVY and J. M. PAPAZIAN: Acta Metall. Mater., 1991, 39, 2255.
  • Y. L. KLIPFEL, M. Y. HE, R. M. McMEEKING, A. G. EVANS, and R. NIEHRABIAN: Acta Metall. Mater., 1990, 38, 1063.
  • H. TODA, N. INOUE, R. SHINMURA, and T. KOBAYASHI: J. Jpn. Inst. Met., 1995, 59, 925.
  • N. J. SORENSEN, S. SURESH, V. TVERGAARD, and A. NEEDLEMAN: Mater. Sci. Eng. , 1995, A197, 1.
  • Y. T. ZHU, G. ZONG, A. MANTHIRAM, and z. ELIERER: J. Mater. Sci., 1994, 29, 6281.
  • N. SIB, B. WILNER, and R. J. ARSENAULT: Acta Metall. Mater., 1992, 40, 2841.
  • N. SHI and R. J. ARSENAULT: Annu. Rev. Mater. Sci., 1994, 24, 321.
  • V. MASSARDIER, R. FOUGERES, and P. MERLE: J. Phys. IV, 1993, 3C7, 703.
  • V. TVERGAARD: Acta Metall. Mater., 1990, 38, 185.
  • G. BAO, J. W. HUTCHINSON, and R. M. McMEEKING: Acta Metall. Mater., 1991, 39, 1871.
  • A. LEVY and J. M. PAPAZIAN: Metall. Trans., 1990, 21A, 411.
  • R vAmiourrE: Acta Metall. Mater., 1995, 43, 2859.
  • W. J. BAXTER: Metall. Trans., 1992, 23A, 3045.
  • S. OCHIAI and M. limo: J. Mater. Sci., 1994, 29, 2754.
  • S. F. CORBIN and D. S. WILKINSON: Acta Metall. Mater., 1994, 42, 1311.
  • K. S. RAVICHANDRAN: Acta Metall. Mater., 1994, 42, 1113.
  • Z. WANG, T.-K. CHEN, and D. J. LLOYD: Metall. Trans., 1993, 24A, 197.
  • C. Y. BARLOW and N. HANSEN: Acta Metall. Mater., 1991, 39, 1971.
  • F. J. HUMPHREYS, A. BASU, and M. R. DJAZEB: in ‘Metal matrix composites — processing, microstructure and properties’, Proc. 12th Riso Symp., (ed. N. Hansen et al.), 51; 1991, Roskilde, Denmark, Rise' National Laboratory.
  • W. S. MILLER, L. A. LENSSEN, and F. J. HUMPHREYS: in Aluminium—lithium alloys', Proc. 5th Int. Conf. on Al—Li Alloys, (ed. T. H. Sanders and E. A. Starke), 931; 1989, Birmingham, MCEP.
  • H. MORIMOTO, H. IWAMURA, M. ABE, and Y. ASHIDA: J. Jpn. Inst. Met., 1994, 58, 973.
  • C. M. STYLES, S. M. FLITCROFT, P. J. GREGSON, and P. D. PITCHER: Scr. Metall. Mater., 1991, 25, 1833.
  • R. J. ARSENAULT, L. WANG, and C. R. PENG: Acta Metall. Mater., 1991, 39, 47.
  • S. J. HONG, P. W. KAO, and C. P. CHANG: Mater. Sci. Eng. , 1992, A158, 195.
  • I. DUTTA, D. L. BOURELL, and D. LATIMER: J. Compos. Mater., 1988, 22, 829.
  • P. B. PRANGNELL and W. M. STOBBS in Proc. 7th Int. Conf. on Composite Materials (ICCM 7), (ed. M. Yunshu et al.), 573; 1990, Oxford, Pergamon Press.
  • M.J. STARINK and P.J. GREGSON: Eng. Mater. Sci., 1996, 211, 54.
  • M. J. STARINK and P. J. GREGSON: Scr. Metall. Mater., 1995, 33, 893.
  • J. M. PAPAZIAN and P. N. ALDER: Metall. Trans., 1990, 21A, 401.
  • C. T. KIM, NI. R. LEE, and M. R. PLICHTA: in ‘Fundamental relationship between microstructure and mechanical properties of metal matrix composites’, (ed. P. K. Liaw and M. N. Gungor), 199; 1990, Warrendale, PA, TMS.
  • J. M. PAPAZIAN: Metall. Trans., 1988, 19A, 2945.
  • T. CHRISTMAN and S. SURESH: Acta Metall. , 1988, 36, 1691.
  • E. HUNT, P. D. PITCHER and R J. GREGSON: in Proc. Int. Conf on Light Metals, (ed. T. Kahn and G. Effenberg), 687; 1990, Materials Park, OH, ASM.
  • I. DUTTA and D. L. BOURELL: Acta Metall. Mater., 1990, 38, 2041.
  • I. DUTTA and D. L. BOURELL: Mater. Sci. Eng. , 1989, A112, 67.
  • I. DurrA and C. P. HARPER: in ‘Aluminium alloys: their mechanical and physical properties’, (ed. L. Arnberg et al.), Vol. 1, 519; 1992, Trondheim, Norway, SINTEF.
  • I. C. STONE and P. TSAKIROPOULOS: Mater. Sci. Eng. , 1994, A189, 285.
  • S. ABIS and G. DONZELLI: J. Mater. Sci. Lett., 1988, 7, 51.
  • C. LID, S. PAPE and J. J. LEWANDOWSKE in ‘Interfaces in polymer, ceramic and metal matrix composites’, Proc. 2nd Int. Conf. on Composite Interfaces, (ed. H. Ishida, 513; 1988, London, Elsevier.
  • P. B. PRANGNELL: PhD thesis, University of Cambridge, UK, 1992.
  • H. J. RACK: in Proc. Joint 6th Int. and 2nd Eur. Conf. on Composite Materials (ICCM 6/ECCM 2), (ed. F. L. Mathews et al.), Vol. 2, 362; 1987, London, Elsevier.
  • R. U. VAIDYA, Z. It. It, K. K. CHAWLA, and A. K. ZUREK: J. Mater. Sci., 1994, 29, 2944.
  • H. J. RACK and G. R. PIPER: in ‘Aluminium alloys: their mechanical and physical properties’, Proc. 4th Int. Conf. on Aluminium Alloys, (ed. T. H. Sanders and E. A. Starke), Vol. 2, 613; 1994, Atlanta, GA, Georgia Institute of Technology.
  • H. J. RACK and A. P. SANNINO: in ‘Aluminium alloys: their mechanical and physical properties’, Proc. 4th Int. Conf. on Aluminium Alloys, (ed. T. H. Sanders and E. A. Starke), Vol. 2, 621; 1994, Atlanta, GA, Georgia Institute of Technology.
  • S. I. HONG and G. T. GREY: Acta Metall. Mater., 1992, 40, 3299.
  • B. MINGLER and H. P. KARNTHALER: Z. Metallkd., 1993, 84, 313.
  • T. S. SIUVATSAN and J. MATTINGLY: J. Mater. Sci., 1993, 28, 611.
  • C. H. DAVIES, N. RAGHUNAT'HAN, and T. SHEPPARD: Mater. Sci. Technol., 1992, 8, 977–984.
  • J.-S. LIN, P.-X. LI, and R.-J. WU: Scr. Metall. Mater., 1993, 28, 281.
  • T. S. KIM, K. H. KIM, K. H. OH, and H. I. LEE: J. Mater. Sci., 1992, 27, 2599.
  • G. M. JANOWSKI and B. J. PLETKA: Metall. Mater. Trans., 1995, 26A, 3027.
  • M. TAYA and T. MORI: Acta Metall. , 1987, 35, 155.
  • R. J. ARSENAULT and H. TAYA: Acta Metall. , 1987, 35, 651.
  • R. J. ARSENAULT and S. B. WU: Mater. Sci. Eng., 1987, 96, 77.
  • C. YBARLOW and N. HANSEN: J. Microsc., 1993, 169, 225.
  • C. T. KIM, J. K. LEE, and M. R. PLICHTA: Metall. Trans., 1990, 21A, 673.
  • D. C. DUNAND and A. MORTENSEN: Acta Metall. Mater., 1991, 39, 127.
  • I. DTJTTA, J. D. SIMMS, and D. M. SEIGENTHALER: Acta Metall. Mater., 1993, 41, 885.
  • M. TAYA, K. E. LULAY, and D. J. LLOYD: Acta Metall. Mater., 1991, 39, 73.
  • M. VOGELSANG, R. J. ARSENAULT, and R. M. FISHER: Metall. Trans., 1986, 17A, 379.
  • L. C. DAVIES and J. E. ALLISON: Metall. Trans., 1993, 24A, 2487.
  • D. B. ZAHL and R. M. McMEEKING: Acta Metall. Mater., 1991, 39, 1117.
  • P. E. McHUGH, R. J. ASARO, and C. F. SHIH: Acta Metall. Mater., 1993, 41, 1501.
  • S. J. ROZEVELD, J. M. HOWE, and S. SCHMAUDER: Acta Metall. Mater., 1992, 40, 173.
  • C. M. STYLES: PhD thesis, University of Southampton, UK, 1993.
  • C. M. GARBRYEL and A. D. McLEOD: Metall. Trans., 1992, 23A, 1279.
  • Y. TOMOTA, T. OHNUKI, M. M. HUANG, H. OHTA, and Y. TAKEUCHI: Trans. Jpn. Inst. Light Met., 1993, 43, 213.
  • D. BROOKSBAND and K. W. ANDREWS: J. Iron Steel Inst., 1969, 207, 474.
  • R. J. ARSENAULT: in ‘Fundamentals of metal matrix com-posites’, (ed. S. Suresh etal.), 133; 1993, London, Butterworth-Heinemann.
  • R. J. ARSENAULT and N. sill: Mater. Sci. Eng., 1986, 81, 175.
  • B. INEM and G. POLLARD: J. Mater. Sci., 1993, 28, 4427.
  • D. J. LLOYD: Acta Metall. Mater., 1991, 39, 59.
  • C. M. STYLES, I. SINCLAIR, P. J. GREGSON, and S. M. FLITCROFT: Mater. Sci. Technol., 1994, 10, (6), 475–480.
  • S. R. NUTT and A. NEEDLEMAN: Scr. Metall., 1987, 21, 705.
  • D. S. Ltu and J. J. LEWANDOWSKI: Metall. Trans., 1993, 24A, 609.
  • Y. BRECHET, J. D. EMBURY, S. TAO, and L. Luo: Acta Metall. Mater., 1991, 39, 1781.
  • P. MUMMERY and B. DERBY: Mater. Sci. Eng. , 1991, A135, 221.
  • P. MUMMERY, B. DERBY, and C. B. SCRUBY: Acta Metall. Mater., 1993, 41, 1431.
  • A.F. HITEHOUSE and T. W. CLYNE: Acta Metall. Mater., 1993, 41, 1701.
  • A. F. WHITEHOUSE and T. W. CLYNE: Acta Metall. Mater., 1995, 43, 2107.
  • C. A. LEWIS and P. J. WITHERS: Acta Metall. Mater., 1995, 43, 3685.
  • P. M. SINGH and J. J. LEWANDOWSKI: Metall. Mater. Trans., 1995, 26A, 2911.
  • G. J. MAHON, J. M. HOWE, and A. K. VASUDEVAN: Acta Metall. Mater., 1990, 38, 1503.
  • Y. L. KLIPFEL, M. Y. HER. M. McMEEK1NG, A. G. EVANS, and R. MEHRABIAN: Acta Metall. Mater., 1990, 38, 1063.
  • W. J. CLEGG, I. HORSFALL, J. F. MASON, and L. EDWARDS: Acta Metall. , 1988, 36, 2151.
  • J. YANG, C. CADY, M. S. HU, F. ZOK, R. MEHRABIAN, and A. G. EVANS: Acta Metall. Mater., 1990, 38, 2613.
  • B. WANG, G. M. JANOWSKI, and B. R. PATTERSON: Metall. Mater. Trans., 1995, 26A, 2457.
  • J. R. BROCKENBROUGH, W. H. HUNT, and O. RICHMOND: Scr. Metall. Mater., 1992, 27, 385.
  • D. J. LLOYD: in ‘Metal matrix composites — processing, microstructure and properties’, Proc. 12th Risco Symp., (ed. N. Hansen et al.), 81; 1991, Roskilde, Denmark, Riso National Laboratory.
  • A. K. VASUDEVAN, O. RICHMOND, F. ZOK, and J. D. EMBURY: Mater. Sci. Eng. , 1989, A107, 63.
  • V. TVERGAARD: Mater. Sci. Eng. , 1990, A125, 203.
  • A. NEEDLEMAN and S. R. NUTT: in ‘Advances in fracture research’, Proc. 7th Int. Conf. on Fracture, (ed. K. Salama et al.), Vol. 3, 211; 1989, Oxford, Pergamon Press.
  • J. R. BROCICENBROUGH and F. W. ZOK: Acta Metall. Mater., 1995, 43, 11.
  • J. LLORCA, A. NEEDLEMAN, and S. SURESH: Acta Metall. Mater., 1991, 39, 2317.
  • M. FINOT, Y.-L. SHUN, A. NEEDLEMAN, and S. SURFSH: Metall. Mater. Trans., 1994, 25A, 2403.
  • A. M. MURPHY and T. W. CLYNE: Key Eng. Mater., 1997, 127, 127.
  • K. TOHGO and G. J. WENG: J. Mater. Sci. Technol., 1994, 116, 414.
  • S. V. KAMAT and M. MANOHARAN: J. Compos. Mater., 1993, 27, 1714.
  • V. TVERGAARD: J. Mech. Phys. Solids, 1993, 41, 1309.
  • J. LLORCA, A. MARTIN, J. RUIZ, and M. ELICES: Metall. Mater. Trans., 1993, 24A, 1574.
  • A.F. HRREHOUSE and T. W. CLYNE: Composites, 1993, 24, 256.
  • B. DERBY: J. Microsc., 1995, 177, 357.
  • T. HIRANO, K. USAMI, Y. TANAKA, and C. MASUDA: J. Mater. Sci. Res., 1995, 10, 381.
  • J. LLORCA: Acta Metall. Mater., 1995, 43, 181.
  • J. LLORCA: J. Phys., 1993, 3—C7, 1793.
  • L. W. ANSON, R. C. CHIVERS, and K. E. PUTTICK: COMpOS. Sci. Technol., 1995, 55, 63.
  • J. F. KNOTT and J. E. KING: Mater. Des., 1991, 12, 67.
  • W. M. GARRISON and N. R. MOODY: J. Phys. Chem. Solids, 1987, 48, 1035.
  • R. H. Van STONE, T. B. COX, J. R. LOW, and J. A PSIODA: Int. Met. Rev., 1985, 30, 157.
  • P. F. THOMASON: ‘Ductile fracture of metals’; 1990, Oxford, Pergamon Press.
  • D. ZHAO and F. R. TULER: Eng. Fract. Mech., 1994, 47, 303.
  • M. MANOHARAN and J. J. LEwANDOwsra Mater. Sci. Eng. , 1992, A150, 179.
  • J. N. HALL, J. W. JONES, and A. K. SACHDEV: Mater. Sci. Eng. , 1994, A183, 69.
  • J. P. MYLES, E. C. FLENLEY, N. R. J. FIELLER, H. V. ATKINSON, and H. JONES: Philos. Mag. A, 1995, 72, 515.
  • J. J. LEWANDOWSKI, c. Liu, and W. H. HUNT: Mater. Sci. Eng. , 1989, A107, 241.
  • J. D. EMBURY: Metall. Trans., 1985, 16A, 2191.
  • S. V. K.AMAT, J. P. HIRTH, and R. MEHRABIAN: Acta Metall. , 1989, 37, 2395.
  • B. P. SOMERDAY, Y. LENG, and R. P. GANGLOFF: Fatigue Fract. Eng. Mater. Struct., 1995, 18, 565.
  • B. P. SONIERDAY, Y. LENG, and R. P. GANGLOFF: Fatigue Fract. Eng. Mater. Struct., 1995, 18, 1031.
  • H. J. KIM, T. KOBAYASHI, H. S. YOON, and E. P. YOON: Mater. Sci. Eng. , 1992, A154, 35.
  • M. J. HADIANFARD, J. C. MEALY, and Y.-W. MAE J. Mater. Sci., 1993, 28, 6217.
  • N. C. BECK, R. M. AIKIN and M. BRIBER: Metall. Mater. Trans., 1994, 25A, 2461.
  • M. MANOHARAN and J. J. LEWANDOWSKE Scr. Metall., 1989, 23, 301.
  • m. MANOHARAN and J. J. LEWANDOWSKI: Acta Metall. Mater., 1990, 38, 489.
  • T. J. DOWNES and J. E. KING: Composites, 1993, 24, 276.
  • T. F. LIMOWICZ and K. S. VECCHIO: in ‘Fundamental relationship between microstructure and mechanical properties of metal matrix composites’, (ed. P. K. Liaw and M. N. Gungor), 255; 1990, Warrendale, PA, TMS.
  • J. J. LEWANDOWSKI, C. Liu, and w. H. HUNT: in ‘Processing and properties for powder metallurgy composites’, (ed. P. Kumar et al.), 107; 1988, Warrendale, PA, TMS.
  • B. ROEBUCK and J. D. LORD: Mater. Sci. Technol., 1990, 6, (12), 1199–1209.
  • D. L. DAvmsoN: Metall. Trans., 1991, 22A, 113.
  • Y. FLOM and R. J. ARSENAULT: Acta Metall. , 1989, 37, 2413.
  • G. LIU, z. H. ZHANG, and J. K. SHANG: Acta Metall. Mater., 1994, 42, 271.
  • A. M. SAMUEL, H. uu, and F. H. SAMUEL: J. Mater. Sci., 1993, 28, 6785.
  • G. T. HAHN and A. R. ROSENFIELD: Metall. Trans., 1975, 6A, 653.
  • J. R. RICE and Jolt/sisals% in ‘Inelastic behaviour of solids’, (ed. M. F. Kannen et al.), 641; 1970, New York, McGraw-Hill.
  • G. G. GARRETT and J. F. KNOTT: Metall. Trans., 1978, 9A, 1187.
  • S. KUMAI, J. E. KING, and J. F. KNOTT: Mater. Sci. Eng. , 1991, A146, 317.
  • S. J. HARRIS: in ‘Mechanical properties of metallic composites’, (ed. S. Ochiai), 613; 1994, New York, Marcel Dekker.
  • S. J. HARRIS and Y. GAO: in ‘Aluminium—lithium’, Proc. 6th Int. Conf. on Al—Li Alloys, (ed. M. Peters and P.-J. Winkler), Vol. 1, 663; 1992, Oberursel, Germany, Deutsche Gesellschaft fur Materialkunde.
  • J. J. BONNE, J. E. ALLISON, and J. W. JONES: Metall. Trans., 1991, 22A, 1007.
  • J. K. SHANG and R. O. RITCHIE: in ‘Metal matrix composites — mechanisms and properties’, (ed. R. K. Everett and R. J. Arsenault), 255; 1991, New York, Academic Press.
  • Z. W. HUANG, I. R. McCOLL, and S. J. HARRIS: Mater. Sci. Eng., 1996, 215, 67.
  • S.-Y. YU, H. Ism, and K. TOHGO: Fatigue Fract. Eng. Mater. Struct., 1994, 17, 571.
  • D. R. WILLIAMS and M. E. FINE: in Proc. 5th Int. Conf. on Composite Materials (ICCM 5), (ed. W. C. Harrigan et al.), 639; 1985, Warrendale, PA, TMS.
  • S. J. HARRIS, K. DINSDALE, Y. GAO, and B. NOBLE: in ‘Mechanical and physical properties of metallic and ceramic matrix composites’, Proc. 9th Riser Int. Symp., (ed. S. I. Andersen et al.), 373; 1988, Roskilde, Denmark, Risks National Laboratory.
  • G. M. VYLETEL, J. E. ALLISON, and D. C. Van AKEN: Metall. Trans., 1993, 24A, 2545.
  • S. KUMAI, J. E. KING, and J. F. KNOTT: Fatigue Fract. Eng. Mater. Struct., 1992, 15, 1.
  • J. C. HEALY and C. J. BEEVERS: Mater. Sci. Eng. , 1991, A142, 183.
  • S. KUMAI, J. E. KING, and J. F. R.Norr: Fatigue Fract. Eng. Mater. Struct., 1990, 13, 511.
  • C. S. LI and F. ELLYIN: Compos. Sci. Technol., 1994, 52, 117.
  • R. O. RucHEE: Mater. Sci. Eng. , 1988, A103, 15.
  • E. Y. CHEN, L. LAWSON, and M. Aosari: Mater. Sci. Eng. , 1995, A200, 192.
  • J. LLORCA, J. RUIZ, J. C. HEALY, M. ELICES, and C. J. BEEVERS: Mater. Sci. Eng. , 1994, A185, 1.
  • M. LEVIN and R. ICARLSSON: Mater. Sci. Technol., 1991, 7, (7), 596–607.
  • J. K. SHANG, W. YU, and R. O. RITCHIE: Mater. Sci. Eng. , 1988, A102, 181.
  • S. KUMAI, K. YOSHIDA, Y. HIGO, and S. NUNOMURA: Int. J. Fatigue, 1992, 14, 105.
  • M. LEVIN, B. KARLSSON, and J. WASEN: in ‘Fundamental relationship between microstructure and mechanical properties of metal matrix composites’, (ed. P. K. Liaw and M. N. Gungor), 421; 1990, Warrendale, PA, TMS.
  • T. CHRISTMAN and S. SURESH: Mater. Sci. Eng. , 1988, A102, 211.
  • J. K. SHANG and R. O. RITCHIE: Acta Metall. , 1989, 37, 2267.
  • Y. SUGIMURA and S. SURESIE Metall. Trans., 1992, 23A, 2231.
  • D. M. KNOWLES and J. E. KING: Acta Metall. Mater., 1991, 39, 793.
  • A. J. PADKIN, M. F. BRERETON, and W. J. PLUMBRIDGE: Mater. Sci. Technol., 1987, 3, (3), 217–223.
  • J. LLORCA: Fatigue Fract. Eng. Mater. Struct., 1992, 15, 655.
  • S. SURESH: Metall. Trans., 1985, 16A, 249.
  • D. L. DAVIDSON: Acta Metall. , 1988, 36, 2275.
  • Z. WANG and R. J. ZHANG: Acta Metall. Mater., 1994, 42, 1433.
  • Y.-L. SHEN, A. NEEDLEMAN, and S. SURESH: Metall. Mater. Trans., 1994, 25A, 839.
  • J. GLATZ and D. L. VRABLE: Acta Astronautica, 1993, 29, 527.
  • R. F. JEFEERIES and D. J. BURROWS: GEC J. Res., 1994, 11, 150.
  • J. A. HORNOR and G. E. HANNON: in Proc. 6th Int. SAMPE Electronics Conf., Vol. 6, 295; 1992, Covina, CA, SAMPE.
  • P. HELLER: in ‘Advances in electronics packaging’, Proc. 1993 ASME Int. Electronics Packaging Conf., Vol. 4-1, 429; 1993, New York, ASME.
  • W. B. JOHNSON and B. SONUPARLAK: J. Mater. Res., 1993, 8, 1169.
  • I. M. HUTCHINGS: Mater. Sci. Technol., 1994, 10, (6), 513–517.
  • K. SUGANUMA, T. FUJITA, N. SUZUKI, and K. NIIHARA: J. Mater. Sci. Lett., 1990, 9, 633.
  • P. K. ROHATGI, S. RAY, and Y. LIU: Int. Mater. Rev., 1992, 37, 129.
  • F. M. HOSKING, F. FOLGAR, R. WUNDERLIN, and R. MEHRABIAN: J. Mater. Sci., 1982, 17, 477.
  • X. WIRTH: Rail. Gaz. Int. , June 1995, 359.
  • J. ZHANG and A. T. ALPAS: Mater. Sci. Eng. , 1993, A161, 273.
  • C. PERRIN and W. M. RAINFORTH: Wear, 1995, 181, 312.
  • A. G. WANG and I. M. HUTCHINGS: Mater. Sci. Technol., 1989, 5, (1), 71–76.
  • Z. F. ZHANG, L. C. ZHANG, and Y. W. MAI: J. Mater. Sci., 1995, 30, 1961.
  • J. ZHANG, R. J. PEREZ, and E. J. LAVERNIA: J. Mater. Sci., 1993, 28, 835.
  • J. ZHANG, It. J. PEREZ, and E. J. LAVERNIA: J. Mater. Sci., 1993, 28, 2395.
  • E. J. LAVERNIA, R. J. PEREZ, and J. ZHANG: Metall. Mater. Trans., 1995, 26A, 2803.
  • P. K. ROHATGI, N. MURAL', H. R. SHEITY, and R. CHANDRASHEKHAR: Mater. Sci. Eng., 1976, 26, 115.
  • L. PARIUNI and R. SCHALLER: Metall. Mater. Trans., 1995, 26A, 1457.
  • B. ILSCHNER and N. CHERRADI (eds.): ‘FGM 94', Proc. 3rd Int. Conf. on Functionally Graded Materials, 1995, Lausanne, Switzerland, Presses Polytechniques et Universitaires Romandes.
  • A. J. MARKWORTH, K. S. RAMESH, and W. P. PARKS: J. Mater. Sci., 1995, 30, 2183.
  • M. PINOT and S. SURESH: J. Mech. Phys. Solids., 1995, 44, 645.
  • E ERDOGAN: Compos. Eng., 1995, 5, 753.
  • G. BAO and L. WANG: Int. J. Solid Struct., 1995, 32, 2853.
  • V. C. NARDONE, J. R. STRIFE, and R. M. PREWO: Metall. Trans., 1991, 22A, 171.
  • P. G. PARTRIDGE, I. FARROW, and D. J. SMITH: Mater. Sci. Technol., 1994, 10, (6), 531–535.
  • W. H. HUNT, T. M. OSMAN, and J. J. LEWANDOWSKE J. Mater., 1993, 45, 30.
  • J. L. YELPY: ‘Damage tolerant discontinuously reinforced aluminium (DRA) alloys’, presented at Engineering Foundation Conf. ‘The mechanics and physics of layered and graded materials’, Davos, Switzerland, August 1995, The Engineering Foundation (New York).
  • C.-Y. LIN, H. B. McSHANE, and R. D. RAWLINGS: Mater. Sci. Technol., 1994, 10, (7), 659–664.
  • L. Y. ELLIS and J. J. LEWANDOWSKE Mater. Sci. Eng. , 1994, A183, 59.
  • T. M. OSMAN and J. J. LEWANDOWSKI: Scr. Metall. Mater., 1994, 31, 191.
  • J. BOSELLE unpublished work, University of Southampton, 1996.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.